How it works
Double-acting rotary actuator
Butterfly disc
5/2 double-solenoid pilot
The number that matters
Max. medium temperature
180°C
The highest medium temperature this valve is rated for.
Construction
Parts and materials
Butterfly valves DNOVA are designed for use as shut-off or regulating valves for flow control in heat and water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
Pneumatic distributor DNOVA 4V320-10 220V is used to change direction, start, stop compressed air flows in pneumatic system depending on the external control action.
Air treatment unit AFC2000 is designed to clean compressed air from dripping moisture and solid particles, remove condensate, automatically maintain pressure at a preset level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system with a wide range of throughput from 500 liters/minute to 10 000 liters/minute. The lubricator adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components such as pneumatic cylinders and pneumatic valves.
Technical parameters of water butterfly valve DNOVA WBV3232V-2W-Fb-H, body - stainless steel 316L, disk - stainless steel 316L, seal - VITON, with pneumatic actuator PA-DA-105-1, with pneumatic valve 4V320-10 220V, ATU AFC2000:
|
Parameter |
Value |
|
Nominal pressure PN, bar |
16 |
|
Working medium temperature, °C |
From -20 to 200 |
|
Connection to pipeline |
Interflanged |
|
Type of valve |
Rotary disc |
|
Type of control |
Pneumatic actuator |
|
Country of manufacture |
China |
Table of parts and materials of water butterfly valve DNOVA WBV3232V-2W-Fb-H, body - stainless steel 316L, disk - stainless steel 316L, seal - VITON, with pneumatic actuator PA-DA-105-1, with pneumatic valve 4V320-10 220V, ATU AFC2000:
| № | Name | Material |
| 1 | Body | WCB steel or AISI 316L stainless steel |
| 2 | Cuff | VITON |
| 3 | Disc | AISI 316L stainless steel |
| 4 | Stem | SS 416/2Cr13 stainless steel |
| 5 | Pin | AISI 316L stainless steel |
| 6 | Bushing | EPDM |
| 7 | Sealing ring | EPDM |
| 8 | Fixing plate | Carbon steel |
Technical parameters of pneumatic actuator PA-DA-105-1:
| Type of pneumatic actuator | double-acting |
| Control pressure, bar | 2 ÷ 8 |
| Operating temperature, °C | -20 to +80 |
| Visual position indicator | open / closed |
| Manual control | handwheel |
| Swivel angle, ° | 90 ± 5 |
| Top connection standard | NAMUR |
| Air connection standard | NAMUR |
| Air supply connection thread | G 1/4" |
| ISO flange type | F07/F10 |
| Stem square, mm | 22x22 |
| Weight, kg | 9 |
| Average life, cycles closed/open | 300 000 |
Pneumatic actuator PA-DA-105-1
Dimensions and dimensions of the pneumatic actuator PA-DA-105-1:
| A, mm | 495 |
| A1, mm | 461.5 |
| B, mm | 133 |
| C, mm | 109.5 |
| D, mm | 153 |
| E, mm | 57.5 |
| F, mm | 64 |
| G, mm | 26 |
| H, mm | 80 |
| I, mm | 30 |
| N, mm | 22 |
| W, mm | 200 |
| J, mm | 102 |
| K, mm | 70 |
| L, mm | M10x16 |
| M, mm | M8x13 |
| O, mm | 4 |
| P, mm | 4 |
| S, mm | M6 |
| T, mm | 24 |
| U, mm | 32 |
Sketch of dimensions and dimensions of pneumatic actuator PA-DA-105-1
PA-DA-105-1 air actuator parts and materials table:
| № | Part name | Material |
| 1 | Indicator screw | ABS (plastic) |
| 2 | Position indicator | ABS (plastic) |
| 3 | Spring clip | Stainless steel 304 |
| 4 | Washer | Stainless steel 304 |
| 5 | External washer | Engineering plastic |
| 6 | Adjustment screw | Stainless steel 304 |
| 7 | Nut | Stainless steel 304 |
| 8 | Washer | Stainless steel 304 |
| 9 | Body | Extruded aluminum alloy |
| 10 | Piston | Die cast aluminum alloy |
| 11 | Piston O-ring | NBR |
| 12 | Bearing group | Engineering plastic |
| 13 | End cap O-ring | NBR |
| 14 | End cap | Die cast aluminum alloy coated with polyester paint |
| 15 | Fixing screw | Stainless steel 304 |
| 16 | Internal washer | Engineering plastic |
| 17 | Sealing ring | NBR |
| 18 | Bearing | Engineering plastic |
| 19 | Retainer | Alloy steel |
| 20 | Gear | Alloy steel |
| 21 | Bearing | Engineering plastic |
| 22 | Sealing ring | NBR |
Parts and material sketch of the PA-DA-105-1 pneumatic actuator
Technical parameters of pneumatic valve DNOVA 4V320-10 220V:
|
Parameter |
Value |
|
Type of pneumatic distributor |
Spool valve |
|
Model of pneumatic distributor |
4V320-10 220V |
|
Operating pressure, bar |
1.5 ÷ 8 |
|
Supply voltage, V |
220V |
|
Operating frequency, cycles/sec |
5 |
Main parameters of the air treatment unit DNOVA AFC2000:
|
Parameter |
Value |
|
Operating pressure, bar |
8 |
|
Maximum pressure, bar |
10 |
|
Adjustable pressure range, bar |
0.5 ÷ 9 |
|
Burst pressure, bar |
15 |
|
Air connection |
1/4" |
|
Operating temperature, °C |
From -5 to +60 |
|
Size of filtered particles, µm |
40 |
|
Oil viscosity |
ISO VG 32 |
|
Weight, kg |
0.395 |
|
Set composition |
Filter-moisture separator, pressure regulator, lubricator, bracket |
Passports and certificates
Data sheet for DNOVA DA/SA double-acting pneumatic actuator with return springs
- Body material
- Stainless steel AISI 316L
- Maximum allowable temperature
- 180 °C
- Connection type
- Compact flanged
- Type of seal
- Viton
- Disc material
- Stainless steel AISI 304
- Country of origin
- China
Production. Usually 7–14 business days after you approve the quotation and pay. Made-to-specification items are confirmed in the quotation.
Freight. Not charged at checkout. A manager quotes air and sea freight to your port or airport, and nothing ships until you approve the price and the freight.
To North America. From approval and payment to the destination port or airport: air 14–24 days, sea 32–60 days. Estimates, not guarantees.
Terms. EXW Ningbo or FOB Ningbo Port; CIF on request. The agreed term is written on the Proforma Invoice.
Total items
Product subtotal