Description
The butterfly valve is designed to be used as a shut-off or control valve for flow control in heat supply systems, water supply, in technological processes in the food, chemical, oil and gas, pulp and paper and other industries. Operating principle: The valves open and close by turning the disk 90°. Opening is done by turning the handle counterclockwise, closing - clockwise.
DNOVA pneumatic rotary actuators double-acting PA-DA-XXX and pneumatic rotary actuators with return spring PA-SA-XXX are designed to automate the process of controlling industrial valves at a maximum torque of up to 2128 Nm.
Pneumatic distributors are used for control in pneumatic systems with a NAMUR mating surface, for installing distributors through through holes in the body. Electromagnetic control is carried out using voltage coils 12-AC, 12-DC, 24-AC, 24-DC, 110-AC, 220-AC. Depending on the model, the distributors have one-way or two-way control. Pneumatic distributors with electromagnetic control have a wide range of models and include common types of switching for three (3/2) and five (5/2 and 5/3) linear pneumatic distributors. Intended for use with quarter-turn pneumatic actuators.
The limit switch unit is designed for visual and electrical signaling of the end positions of the shut-off element of the valve: valve, tap or butterfly valve. It is installed on top of the surface of the pneumatic actuator and connected to the DIN standard actuator shaft. As a rule, there are two sensors in a sealed box that monitor the position of the actuator shaft and signal in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors.
Technical characteristics of the DNOVA WBV3131E-2W-CH rotary clamp disc valves DN15-100 PN10 food grade stainless steel 304, EPDM:
| Characteristic | Meaning |
| Shutter type | rotary disc |
| Diameter | 15-100 mm |
| Nominal pressure | 10 bar |
| Working environment temperature | from -20 to +135°C |
| Application | Food industry |
| Connection type | clamp |
| Control type | pneumatic drive |
| Sealing class | A |
Technical characteristics of DNOVA double-acting rotary pneumatic actuators PA-DA-XXX:
| Characteristic | Meaning |
| Pneumatic drive type | double acting |
| Drive torque | 14-30 Nm |
| Nominal pressure | 12 bar |
| Working pressure | 2...8 bar |
| Maximum particle diameter | less than 30 µm2 |
| Working environment | filtered compressed air or non-aggressive gases, oils |
| Adjustment range | ±5° for rotation at 0° and 90° |
| Air supply | G1/4" |
| Working environment temperature | from –20 to +80 °C |
Pneumatic distributors DNOVA 4M310-08 220V
Technical characteristics of pneumatic distributors DNOVA 4M310-08 220V:
| Characteristic | Meaning |
| Model of pneumatic distributor | 4m310-08 220v |
| Supply voltage | 220V |
| Design | spool type |
| Nominal pressure | 12 bar |
| Working pressure | 1.5...8 bar |
| Ambient temperature | from +5 to +50 ⁰C |
| Working environment | filtered compressed air |
| Response frequency | 5 cycles/s |
| Degree of protection | IP65 |
| Fastening | through through holes in the body |
| Body material | anodized aluminum |
| Response time | 0.05 sec |
Limit Switch Blocks DNOVA APL-210N
Technical characteristics of limit switch units DNOVA APL-210N:
| Characteristic | Meaning |
| Limit switch block model | APL-210N |
| Protection | All-weather IP65 |
| Ambient temperature | from -40°C to +80°C |
| Cable entry thread | 2 x NPT1/2” |
| Terminal block | 8 cells 0.08-2.6mm2 |
| Voltage | 12V, 24V, 38V, 48V, 110V, 220V, 250V |
| Sensor | 2 SPDT Electromechanical Microswitches OMRON V151-1C25 |
| External coating | polyester coating (black) |
| Shaft | standard (17 mm) |
Sketch of dimensions of butterfly valves DNOVA WBV3131E-2W-CH DN15-100 PN10 food grade stainless steel 304, EPDM
Overall and installation dimensions of DNOVA WBV3131E-2W-CH clamp-type butterfly valves DN15-100 PN10 food grade stainless steel 304, EPDM:
| Diameter | D, mm | D1, mm | A, mm | H, mm | J, mm | K, mm |
| DN15 | 34 | 78 | 66 | 86 | 126 | 8x8 |
| DN20 | 34 | 78 | 66 | 86 | 126 | 8x8 |
| DN25 | 50.5 | 78 | 66 | 86 | 126 | 8x8 |
| DN32 | 50.5 | 86 | 66 | 90 | 126 | 8x8 |
| DN40 | 50.5 | 90 | 70 | 92 | 126 | 8x8 |
| DN50 | 64 | 106 | 76 | 104 | 133 | 10x10 |
| DN65 | 91 | 124 | 80 | 113 | 144 | 10x10 |
| DN80 | 106 | 139 | 84 | 123.5 | 160 | 10x10 |
| DN100 | 119 | 159 | 104 | 133.5 | 160 | 10x10 |
Overall and installation dimensions of DNOVA double-acting pneumatic rotary actuators PA-DA-XXX:
| Model | A, mm | B, mm | C, mm | D, mm | E, mm | F, mm | G, mm | M, mm | N, mm | O, mm | P, mm |
| PA-DA(SA)-052 | 108 | 153 | 30 | 41 | 72 | 26 | 15 | 80 | 30 | 34 | 20 |
| PA-DA(SA)-065 | 125 | 174 | 36 | 46 | 89 | 26 | 15 | 80 | 30 | 34 | 20 |
| PA-DA(SA)-083 | 152 | 216 | 46 | 55 | 109 | 26 | 15 | 80 | 30 | 34 | 20 |
| PA-DA(SA)-105 | 189 | 279 | 55 | 64 | 134 | 26 | 25 | 80 | 30 | 41 | 20 |
| PA-DA(SA)-130 | 210 | 308 | 67.5 | 70 | 157 | 36 | 25 | 80 | 30 | 62 | 30 |
| PA-DA(SA)-140 | 268 | 405 | 76 | 77 | 174 | 36 | 30 | 130 | 30 | 62 | 30 |
| PA-DA(SA)-160 | 310 | 465 | 87.5 | 87.5 | 199 | 38 | 30 | 130 | 30 | 62 | 30 |
| PA-DA(SA)-210 | 390 | 542 | 113 | 113 | 257 | 38 | 40 | 130 | 30 | 79 | 30 |
| PA-DA(SA)-270 | 510 | 722 | 146 | 146 | 333 | 38 | 52 | 130 | 30 | 79 | 30 |
Sketch of dimensions of pneumatic distributors DNOVA 4M310-08 220V
Overall and installation dimensions of pneumatic distributors DNOVA 4M310-08 220V:
| Depth, mm | 27 |
| Height, mm | 69 |
| Width, mm | 134.5 |
Sketch of the dimensions of the limit switch blocks DNOVA APL-210N
Overall and installation dimensions of limit switch units DNOVA APL-210N:
| Depth, mm | 112 |
| Height, mm | 77 |
| Width, mm | 88 |
Sketch of materials of butterfly valves DNOVA WBV3131E-2W-CH DN15-100 PN10 food grade stainless steel 304, EPDM
Materials of parts of DNOVA WBV3131E-2W-CH rotary clamp disc valves DN15-100 PN10 food grade stainless steel 304, EPDM:
| No. | Part name | Material |
| 1 | Frame | stainless steel 304 |
| 2 | Pivot knot | stainless steel 304 |
| 3 | Disk | stainless steel 304 |
| 4 | Saddle seal | EPDM |
| 5 | screw | steel A2~70 |
| 6 | Bolt | steel A2~70 |
| 7 | Cork | ABS plastic |
Sketch of rotary pneumatic actuators DNOVA double acting PA-DA-XXX
Design of DNOVA double-acting rotary pneumatic actuators PA-DA-XXX:
| No. | Name | Quantity | Material |
| 1 | Frame | 1 | extruded aluminum (hard anodized finish) |
| 2 | Side plugs | 2 | cast aluminum |
| 3 | Gear | 1 | stainless steel (nickel plated) |
| 4 | Piston | 2 | steel/aluminium (oxidation/galvanized) |
| 5 | Plugs | 8 | stainless steel |
| 6 | Piston ring | 2 | NBR |
| 7 | Springs | 0-12 | spring steel (epoxy coating) |
| 8 | Piston bearing | 2 | engineering plastic |
| 9 | Piston ring | 2 | NBR |
| 10 | Plug | 2 | NBR |
| 11 | Thrust ring | 2 | engineering plastic |
| 12 | Ring | 1 | engineering plastic |
| 13 | Washer | 1 | stainless steel |
| 14 | Spring clamp | 2 | stainless steel |
| 15 | Indicator | 1 | plastic |
| 16 | Indicator housing | 1 | plastic |
| 17 | Bearing | 1 | engineering plastic |
| 18 | Cam | 1 | steel (oxidation/galvanized) |
| 19 | Bearing | 1 | NBR |
| 20 | Bearing | 1 | engineering plastic |
| 21 | Bearing | 1 | engineering plastic |
| 22 | Sealing ring | 2 | NBR |
| 23 | Sealing ring | 2 | NBR |
| 24 | Bearing | 2 | stainless steel |
| 25 | Adjusting nut | 2 | stainless steel |
| 26 | Adjustment screw | 2 | stainless steel |
| 27 | Sleeve | 2 | aluminum |
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.