Description
The ball valve is used as a shut-off valve, as well as for mixing and separation of medium flows in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) that are not aggressive to valve materials.
Pneumatic actuators DNOVA double-acting rotary actuators PA-DA are designed to automate the process of controlling industrial valves with maximum torque up to 2128 Nm.
Technical parameters of ball valves DNOVA BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19
| Parameter | Value |
|---|---|
| Nominal Pressure PN, bar | 16 |
| Operating Medium Temperature, °C | from -25 to 180 |
| Valve Type | Three-way |
| Three-Way Valve Type | L |
| Application | Water supply, Heating |
| Working Medium | Water, Steam, Petroleum products, Neutral media, Gaseous media |
| Pipeline Connection | Flanged |
| Water Draw-Off | No |
| Bore Type | Full bore |
| Tightness Class | A |
| Control Type | With pneumatic actuator |
| Connection Type | Flanged |
| Actuation | Double-acting pneumatic actuator |
| Limit Switches | Yes |
| Pneumatic Valve | Yes |
| Electropneumatic Positioner | No |
| Average Service Life, years | 10 |
| Warranty, years | 1 |
| Country of Manufacture | China |
Dimensions and dimensions of ball valves DNOVA BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19
| DN | d, mm | d1, mm | k, mm | D, mm | L, mm | H, mm | W, mm | T, mm |
| 15 | 15 | 45 | 65 | 95 | 150 | 72 | 150 | 14 |
| 20 | 18 | 58 | 75 | 105 | 160 | 77 | 190 | 14 |
| 25 | 25 | 64 | 85 | 115 | 180 | 82 | 190 | 14 |
| 32 | 32 | 78 | 100 | 140 | 200 | 100 | 215 | 16 |
| 40 | 38 | 88 | 110 | 150 | 220 | 108 | 215 | 16 |
| 50 | 49 | 99 | 125 | 165 | 240 | 125 | 250 | 18 |
| 65 | 65 | 122 | 145 | 185 | 260 | 144 | 250 | 18 |
| 80 | 80 | 138 | 160 | 200 | 280 | 160 | 300 | 20 |
| 100 | 100 | 158 | 180 | 220 | 325 | 187 | 300 | 20 |
| DN | D1, mm | D2, mm | D3, mm | D4, mm | SxS, mm | N – Z, mm | ISO 5211 | Weight, kg |
| 15 | 5,5 | 6 | 36 | 42 | 9х9 | 4 –14 | F03/F04 | 3,5 |
| 20 | 6,0 | 7 | 42 | 50 | 11х11 | 4 –14 | F04/F05 | 4,5 |
| 25 | 6,0 | 7 | 42 | 50 | 11х11 | 4 –14 | F04/F05 | 5,6 |
| 32 | 7,0 | 9 | 50 | 70 | 14х14 | 4 –18 | F05/F07 | 9,3 |
| 40 | 7,0 | 9 | 50 | 70 | 14х14 | 4 –18 | F05/F07 | 11,65 |
| 50 | 9,0 | 11 | 70 | 102 | 17х17 | 4 –18 | F07/F10 | 17,95 |
| 65 | 9,0 | 11 | 70 | 102 | 17х17 | 4 –18 | F07/F10 | 26,5 |
| 80 | 9,0 | 11 | 70 | 102 | 19х19 | 8 –18 | F07/F10 | 39,1 |
| 100 | 11,0 | 13 | 102 | 125 | 19х19 | 8 –18 | F10/F12 | 58,5 |
Sketch dimensions and dimensions of ball valves DNOVA BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19
Table of parts and materials for ball valves DNOVA BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19
| № | Part Name | Material |
|---|---|---|
| 1 | Body | Stainless Steel SS316 |
| 2 | Ball | Stainless Steel SS316 |
| 3 | Seal | PTFE |
| 4 | Body Cover | Stainless Steel SS316 |
| 5 | Bolt | Stainless Steel SS304 |
| 6 | Gasket | PTFE |
| 7 | Nut | Stainless Steel SS304 |
| 8 | Gasket | PTFE |
| 9 | Stem Seal | PTFE |
| 10 | Bolt | Stainless Steel SS304 |
| 11 | Packing | Stainless Steel SS304 |
-fp-3x-f-h-naboryi.jpg)
Parts and materials sketch for ball valves DNOVA BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19
Technical data of DA double-acting pneumatic actuators:
| Type of pneumatic actuator | DA - double-acting |
| Nominal pressure PN, bar | 12 |
| Working pressure, bar | 2...8 |
| Working medium | filtered compressed air |
| Maximum particle diameter of the working medium, µm2 | ≤30 |
| Ambient temperature, ⁰C | -20 to +80 |
| Swivel angle, ° | 0 - 90 |
| Swivel angle adjustment, % | ±5 |
| Position indicator | open/closed |
| Top connection standard | NAMUR |
| Air connection standard | NAMUR |
| Average life, cycles closed/open | 70 000 (for non-aggressive media and medium pressure and temperature values) |
DA pneumatic actuators double-acting rotary actuators
Dimensions and mounting dimensions of DA double-acting pneumatic actuators:
| Model | A, mm | B, mm | C, mm | D, mm | E, mm | F, mm | G, mm | H, mm |
| DA-052 | 30 | 41,5 | 65,5 | 72 | 92 | 65 | 30 | 80 |
| DA-065 | 36 | 47 | 81 | 88 | 108 | 72 | 30 | 80 |
| DA-083 | 46 | 57 | 98,5 | 108,7 | 128,7 | 92 | 30 | 80 |
| DA-105 | 57,5 | 64 | 122,5 | 133 | 153 | 109,5 | 30 | 80 |
| DA-130 | 67,5 | 74,5 | 145,5 | 155 | 185 | 127,5 | 30 | 130 |
| DA-140 | 75 | 77 | 161 | 172 | 202 | 137,5 | 30 | 130 |
| DA-160 | 87 | 87 | 184 | 197 | 227 | 159 | 30 | 130 |
| DA-210 | 113 | 113 | 235,5 | 255 | 285 | 210 | 30 | 130 |
| DA-270 | 147 | 147 | 299 | 326 | 356 | 273 | 30 | 130 |
| DA-300 | 162 | 174 | 330 | 350 | 380 | 312 | 30 | 130 |
| DA-350 | 190 | 195 | 483 | 410 | 440 | 365 | 30 | 130 |
| Model | I, mm | J, mm | M, mm | N, mm | Z, mm | d, mm | K | L |
| DA-052 | 36 | 50 | 11x11 | 14 | 147 | 40 | M5x8 | M6x10 |
| DA-065 | 50 | 70 | 14x14 | 18 | 168 | 40 | M6x10 | M8x13 |
| DA-083 | 50 | 70 | 17x17 | 21 | 204 | 40 | M6x10 | M8x13 |
| DA-105 | 70 | 102 | 22x22 | 26 | 268 | 40 | M8x13 | M10x16 |
| DA-130 | 70 | 102 | 22x22 | 26 | 301 | 55 | M8x13 | M10x16 |
| DA-140 | 102 | 125 | 27x27 | 31 | 390 | 55 | M10x16 | M12x20 |
| DA-160 | 102 | 125 | 27x27 | 31 | 458 | 55 | M10x16 | M12x20 |
| DA-210 | - | 140 | 36x36 | 40 | 532 | 80 | - | M16x25 |
| DA-270 | - | 165 | 46x46 | 50 | 718 | 80 | - | M20x25 |
| DA-300 | - | 165 | 46x46 | 50 | 760 | 80 | - | M20x25 |
| DA-350 | 165 | 254 | 46x46 | 50 | 920 | 80 | M20x25 | 8xM16x25 |
Sketch of dimensions of DA double-acting pneumatic actuators
Materials of parts for DA double-acting pneumatic actuators:
| № | Part name | Material |
| 1 | Indicator screw | ABS plastic |
| 2 | Position indicator | ABS plastic |
| 3 | Spring clip | stainless steel 304 |
| 4 | Metal washer | stainless steel 304 |
| 5 | Pressure washer | engineering plastic |
| 6 | Housing | hard anodized extruded aluminum alloy |
| 7 | Pressure washer | engineering plastic |
| 8 | Limiter | alloy steel |
| 9 | Shaft sealing ring upper | NBR |
| 10 | Upper shaft sliding ring | engineering plastic |
| 11 | Shaft | nickel plated alloy steel |
| 12 | Shaft sliding ring lower | engineering plastic |
| 13 | Shaft O-ring lower | NBR |
| 14 | Plug | NBR |
| 15 | Seal ring of adjusting screws | NBR |
| 16 | Washer of adjusting screw | stainless steel 304 |
| 17 | Lock nut of adjusting screw | stainless steel 304 |
| 18 | Adjusting screw | stainless steel 304 |
| 19 | Piston | die-cast aluminum alloy |
| 20 | Piston guide plate | engineering plastic |
| 21 | Piston sliding ring | engineering plastic |
| 22 | Piston O-ring | NBR |
| 23 | Spring set | spring steel |
| 24 | Cover O-ring | NBR |
| 25 | End cap | cast aluminum with polyester coating |
| 26 | Cover screw | stainless steel 304 |
| 27 | Stop screw | stainless steel 304 |
| 28 | Adapter | carbon steel |
Material sketch of DA double-acting pneumatic actuators
Technical characteristics of the pneumatic distributor 4M310-08 NAMUR
| Design | Spool-type |
| Test pressure (body strength test. Not for operation!), bar | 10 |
| Working pressure (recommended range for normal operation), bar | 1.5 ÷ 8 |
| Valve type | 5/2 five-port, two-position |
| Working medium | purified air (40 µm filter fineness) |
| Operating temperature, °C | 0 to +60 |
| Actuation frequency | 5 cycles per second |
| Manual override | yes |
| Protection rating/insulation class | IP65/F |
| Connection to pneumatic actuator | NAMUR-compliant mounting surface (VDI/VDE3845) |
| Body material | anodized aluminum |
| Effective cross-sectional area, mm2 | 25 (Cv = 1.4) |
| Exhaust port dimensions (vent to atmosphere) | 2 - PT1/4” |
| Air inlet port size (to pneumatic valve) | G1/4” |
| Air outlet port size (to pneumatic actuator) | 2 x Ø19.2 mm |
| Response time, sec | 0.05 |
| Supply voltage, V | 220AC/24DC |
| Coil power | 220VAC – 5.5 VA/24VDC – 4.8 W |
| Weight, kg | 0.35 |
| Average service life, cycles | 10,000,000 |
Overall and installation dimensions of the pneumatic distributor 4M310-08 NAMUR
| A | C | D | E | F | G | H | I | K | L | J | N | M |
| mm | ||||||||||||
| 40 | 24 | 28 | 32 | 40 | 21,5 | 69 | 45 | 17,5 | 135 | 29,3 | 40 | 27 |
Sketch of the dimensions of the pneumatic distributor 4M310-08 NAMUR
Basic materials and parts of the pneumatic distributor 4M310-08 NAMUR
| № | Part Name | Material |
| 1 | Connector | Engineering plastic |
| 2 | Nut | POM + carbon steel |
| 3 | Coil | Copper |
| 4 | Control Elements | — |
| 5 | Plate | Carbon steel |
| 6 | Piston | POM |
| 7 | Control Valve Seat | Engineering plastic |
| 8 | Valve Body | Aluminum alloy |
| 9 | Spool | Aluminum alloy |
| 10 | O-Ring Seal | HNBR |
| 11 | Rear Cover | Engineering plastic |
| 12 | Filter | Synthetic material |
| 13 | Piston | POM |
| 14 | Spring | Stainless steel |
| 15 | Manual Override | Engineering plastic |
| 16 | Rear Seat | Aluminum alloy |
| 17 | Spring Seat | Aluminum alloy |
| 18 | Type C Towing Shackle | 65Mn |
Sketch of the dimensions of the pneumatic distributor 4M310-08 NAMUR
Technical parameters of limit switch units DNOVA APL-210N
| Name | Value |
|---|---|
| Limit Switch Box Model | APL-210N |
| Enclosure Protection Rating, IP | 65 |
| Service Life, years | 10 |
Dimensions and dimensions of DNOVA APL-210N limit switch units
| Model | H | L | B | D | D1 | M |
| APL-210N | 77 | 112 | 88 | 10 | 5 | 20x1.5 |
Sketch of dimensions and dimensions of DNOVA APL-210N limit switch units
Specifications
Country of origin
Port opening
Body material
Maximum allowable temperature
Connection type
Control type
Operating environment
Water,
Steam,
Petroleum Products,
Neutral Media,
Gaseous Media
Type of seal
Voltage
Explosion-proof
Torque
Limit switches
Type of pneumatic actuator
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.