Ball valve BV3232P(2pc)-FP-F-ISO-R with pneumatic double-acting actuator

The ball valve is used as a shut-off valve in heating, water supply, steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve. The use of ball valves as regulating valves is not allowed.

DNOVA pneumatic double-acting rotary actuators PADA are designed to automate the process of controlling industrial valves with maximum torque up to 2128 Nm.

The pneumatic valve is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.

The worm gear manual doubleturn actuator with reduction gear allows the manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.

The air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain the pressure value at a preset level, supply lubricant from the tank in the compressed air flow to the pneumatic system elements.

Technical parameters of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316

Parameter	Value
Nominal Pressure PN, bar	16
Operating Temperature, °C	-29 to 150
Valve Type	Two-way
Application	Water supply, heating, industry
Working Medium	Water, air, neutral media
Pipeline Connection	Flanged
Water-drawing	No
Bore Type	Full bore
Control Type	With pneumatic actuator
Connection Type	Flanged
Operation	Double-acting pneumatic actuator
Limit Switches	No
Pneumatic Distributor	Yes
Electro-pneumatic Positioner	No
Average Service Life, years	10
Warranty, years	1
Country of Manufacture	China

 

 

Dimensions and dimensions of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316

Sketch dimensions and dimensions of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316

 

 

Table of parts and materials for ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316

№	Part Name	Material
1	Body	Stainless steel 316
2	Gasket	Stainless steel 316 + Graphite
3	Cover	Stainless steel 316
4	Nut	Stainless steel ASTM A193 Gr.B8M Cl2
5	Bolt	Stainless steel ASTM A193 Gr.B8M Cl2
6	Ball Seal	PTFE
7	Ball	Stainless steel 316
8	Stem	Stainless steel 316
9	Support Pad	PTFE
10	Stem Seal	PTFE
11	Packing Seal	Stainless steel 316
12	Bolt	Stainless steel ASTM A193 Gr.B8M Cl2
13	Support Frame	Stainless steel 304
14	Gasket	Stainless steel 304
15	Stud	Stainless steel ASTM A193 Gr.B8M Cl2
16	Nut	Stainless steel ASTM A193 Gr.B8M Cl2
17	Cushioning Gasket	Stainless steel
18	Stud	Stainless steel ASTM A193 Gr.B8M Cl2
19	Nut	Stainless steel ASTM A193 Gr.B8M Cl2
20	Gear Transmission	Steel 45
22	Screw	Stainless steel ASTM A193 Gr.B8M Cl2

Parts and materials sketch for ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316

 

 

Technical parameters of pneumatic actuator DNOVA

Parameter	Value
Design	Double-acting
Control Pressure, bar	2 ÷ 8
Manual Override	No

 

 

Dimensions and dimensions of pneumatic actuator DNOVA

Model	DA-140	DA-160
G, mm	25	30
M, mm	80	130
N, mm	30	30
f0, mm	62	62
P, mm	30	30
B1,mm	308	465
C, mm	67.5	87.5
E, mm	157	199
J	4-M8x12	4-M10x16
K	4-M10x16	4-M12x20
F, mm	36	38
A1, mm	210	310
D, mm	70	87.5
H	F10	F10
I	F12	F12
L	22x22	27x27

Sketch of dimensions and dimensions of pneumatic actuator DNOVA

 

 

Parts and materials table for pneumatic actuator DNOVA

№	Part Name	Qty	Material	Coating
1	Body	1	Extruded aluminum	Hard anodized
2	Side plugs	2	Cast aluminum	-
3	Gear	1	Stainless steel	Nickel-plated
4	Piston	2	Steel/Aluminum	Oxidation / Galvanized zinc
5	Plugs	8	Stainless steel	-
6	Piston ring	2	NBR	-
7	Springs	0-12	Spring steel	Epoxy coating
8	Piston bearing	2	Engineering plastic	-
9	Piston ring	2	NBR	-
10	Plug	2	NBR	-
11	Stop ring	2	Engineering plastic	-
12	Ring	1	Engineering plastic	-
13	Washer	1	Stainless steel	-
14	Spring clamp	2	Stainless steel	-
15	Indicator	1	Plastic	-
16	Indicator housing	1	Plastic	-
17	Bearing	1	Engineering plastic	-
18	Cam	1	Steel	Oxidation / Galvanized zinc
19	Bearing	1	NBR	-
20	Bearing	1	Engineering plastic	-
21	Bearing	1	Engineering plastic	-
22	O-ring	2	NBR	-
23	O-ring	2	NBR	-
24	Bearing	2	Stainless steel	-
25	Adjustment nut	2	Stainless steel	-
26	Adjustment screw	2	Stainless steel	-
27	Bushing	2	Aluminum	-

 

 

Technical characteristics of the pneumatic distributor 4M310-08 NAMUR

Design	Spool-type
Test pressure (body strength test. Not for operation!), bar	10
Working pressure (recommended range for normal operation), bar	1.5 ÷ 8
Valve type	5/2 five-port, two-position
Working medium	purified air (40 µm filter fineness)
Operating temperature, °C	0 to +60
Actuation frequency	5 cycles per second
Manual override	yes
Protection rating/insulation class	IP65/F
Connection to pneumatic actuator	NAMUR-compliant mounting surface (VDI/VDE3845)
Body material	anodized aluminum
Effective cross-sectional area, mm2	25 (Cv = 1.4)
Exhaust port dimensions (vent to atmosphere)	2 - PT1/4”
Air inlet port size (to pneumatic valve)	G1/4”
Air outlet port size (to pneumatic actuator)	2 x Ø19.2 mm
Response time, sec	0.05
Supply voltage, V	220AC/24DC
Coil power	220VAC – 5.5 VA/24VDC – 4.8 W
Weight, kg	0.35
Average service life, cycles	10,000,000

 

 

 

Overall and installation dimensions of the pneumatic distributor 4M310-08 NAMUR

A	C	D	E	F	G	H	I	K	L	J	N	M
mm
40	24	28	32	40	21,5	69	45	17,5	135	29,3	40	27

Sketch of the dimensions of the pneumatic distributor 4M310-08 NAMUR

 

 

Basic materials and parts of the pneumatic distributor 4M310-08 NAMUR

№	Part Name	Material
1	Connector	Engineering plastic
2	Nut	POM + carbon steel
3	Coil	Copper
4	Control Elements	—
5	Plate	Carbon steel
6	Piston	POM
7	Control Valve Seat	Engineering plastic
8	Valve Body	Aluminum alloy
9	Spool	Aluminum alloy
10	O-Ring Seal	HNBR
11	Rear Cover	Engineering plastic
12	Filter	Synthetic material
13	Piston	POM
14	Spring	Stainless steel
15	Manual Override	Engineering plastic
16	Rear Seat	Aluminum alloy
17	Spring Seat	Aluminum alloy
18	Type C Towing Shackle	65Mn

Sketch of the dimensions of the pneumatic distributor 4M310-08 NAMUR

 

 

Technical parameters of the handwheel DNOVA MON-ISO

Name	Value
Manual override model	MON-ISO
Climatic version	U, UHL, T, OM
Mounting method	Horizontal/Vertical
Protection rating, IP	67
Connection type	ISO 5211

 

 

Dimensions and dimensions of the handwheel DNOVA MON-ISO

Parameter	Value
Model	MON4-1200-T54-ISO
b1, mm	27
N, mm	32
b2, mm	27
M, mm	30
D1, mm	Ø102
4-M1, mm	4-M10
D2, mm	Ø125
4-M2, mm	4-M12
E, mm	129×129
D3, mm	Ø125
4-Ø1, mm	4-Ø12.5
D4, mm	Ø140
4-Ø2, mm	4-Ø16.5
A, mm	188.5
B, mm	93
ØC, mm	Ø174
F, mm	202
T, mm	94
Y, mm	280
H, mm	195
S, mm	84
K, mm	15
Handwheel Ø, mm	320

Sketch of dimensions and dimensions of handwheel DNOVA MON-ISO

 

 

Parts and materials table for the handwheel DNOVA MON-ISO

№	Component	Material
1	Stem for pneumatic actuator mounting	Steel 45
2,8	O-ring	EPDM
3	Retaining spring	Spring steel
4	Upper end cap	Aluminum alloy
5	Screw	Steel 304
6	Retaining bracket (main linkage)	Steel 304
7	Housing	Aluminum alloy
9	Gearbox	Cast iron BC50
10	Adapter coupling	Cast iron BC40
11	Gearbox stem	Cast iron BC40

Sketch of parts and materials of the handwheel DNOVA MON-ISO

 

 

Technical parameters of DNOVA AFC2000 air treatment unit

Parameter	Value
Operating pressure, bar	8
Adjustable pressure range, bar	0.5 ÷ 9
Filtered particle size, µm	40 µm
Weight, kg	0.395

 

 

 

Technical parameters of limit switch units DNOVA APL-210N

Parameter	Value
Model of limit switch block	APL-210N
Ambient temperature, °C	from -20 to 66
Service life, years	10

 

 

 

Dimensions and dimensions of DNOVA APL-210N EX limit switch units

Dimensions and dimensions of DNOVA AFC2000 air treatment unit

Parameter	Value
Model	AFC2000
A, mm	162
B, mm	88
C, mm	139
D, mm	31
E, mm	53.5
F, mm	12
G, mm	8
H, mm	7
I, mm	13.3
J, mm	39
K, mm	5
L, mm	40
M, mm	32
N, mm	53
O, mm	29
P, mm	6
R, mm	41.5

Sketch of dimensions and dimensions of DNOVA AFC2000 air treatment unit

 

Passports and certificates

Data sheet for DNOVA DA/SA double-acting pneumatic actuator with return springs