Description
The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the valve materials. The use of ball valves as control valves is not allowed.
Electric actuators are installed directly on pipeline fittings. The installation dimensions correspond to the international standard ISO 05211 / DIN3337. Four microswitches are used to limit the stroke of the output shaft according to the end positions of the working element of the fitting. Electric actuators are designed for operation in the nominal short-term mode S2.
Technical characteristics of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R DN200 PN16 full bore flanged, body - stainless steel 316, with electric actuator 1/4-turn DNOVA QT-N-EM-O1-220VAC-U1 220V:
| Name | Meaning |
| Nominal pressure, bar | 16 |
| Connection type | flanged |
| Control type | With electric drive |
| Application | water supply, heat supply, industry |
| Crane ball passage | full bore |
| Climate performance | U1 |
| Working environment temperature, °C | from -29 to 150 |
| Joining | flanged |
| Control | Electric drive 380V |
| Sealing class | A |
| Water intake | No |
| Type of crane device | two-way |
| Working medium | water, air, neutral environments |
Sketch dimensions and dimensions of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R DN200 PN16 full bore flanged, body - stainless steel 316, with electric actuator 1/4-turn DNOVA QT-N-EM-O1-220VAC-U1 220V
Dimensions and sizes of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R DN200 PN16 full bore flanged, body - stainless steel 316, with 1/4-turn electric actuator DNOVA QT-N-EM-O1-220VAC-U1 220V:
| Model | DN, mm | L, mm | H, mm | D, mm | D1, mm | D2, mm | L1, mm | H1, mm |
| DN200 | 200 | 400 | 180 | 340 | 295 | 268 | 269 | 155 |
| DN250 | 250 | 450 | 296 | 405 | 355 | 320 | 268 | 212 |
Sketch of details and materials of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R DN200 PN16 full bore flanged, body - stainless steel 316, with electric actuator 1/4-turn DNOVA QT-N-EM-O1-220VAC-U1 220V
Table of details and materials of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R Du200 PN16 full-bore flanged, body - stainless steel 316, with electric actuator 1/4-turn DNOVA QT-N-EM-O1-220VAC-U1 220V:
| Item No. | Details | Material |
| 1 | Frame | stainless steel 316 |
| 2 | Pad | stainless steel 316+graphite |
| 3 | Lid | stainless steel 316 |
| 4 | screw | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 5 | Bolt | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 6 | Ball seal | PTFE |
| 7 | Ball | stainless steel 316 |
| 8 | Stock | stainless steel 316 |
| 9 | Thrust pad | PTFE |
| 10 | Rod seal | PTFE |
| 11 | Gland seal | stainless steel 316 |
| 12 | Bolt | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 13 | Support frame | stainless steel 304 |
| 14 | Pad | stainless steel 304 |
| 15 | Hairpin | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 16 | screw | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 17 | Shock absorbing pad | stainless steel |
| 18 | Hairpin | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 19 | screw | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 20 | Gear | steel 45 |
| 22 | Screw | Stainless steel ASTM A193 Gr.B8M Cl2 |
Technical parameters of electric drives QT-N-EM-O1-220VAC-U1:
| Name | Meaning |
| Electric drive model | QT-N-EM-O1-220VAC-U1 |
| Supply voltage | 220 V |
| Ambient temperature | from -20°C to 70°C |
| Availability of manual backup | Hexagon |
| Limit switches | There is |
| Degree of protection of the case | IP67 |
Sketch of dimensions and sizes of electric drives QT-N-EM-O1-220VAC-U1
Dimensions and sizes of electric drives QT-N-EM-O1-220VAC-U1:
| Drive model | L, mm | H1, mm | A, mm |
| QT-N-060EM-O1-220VAC-U1 | 269 | 155 | 174 |
| QT-N-080EM-O1-220VAC-U1 | 268 | 212 | 164 |
Sketch of the device of electric drives QT-N-EM-O1-220VAC-U1
The design of electric drives QT-N-EM-O1-220VAC-U1:
| № | Details |
| 1 | Output shaft |
| 2 | Cable lock |
| 3 | Mechanical limiter |
| 4 | Manual doubler |
| 5 | Case |
| 6 | Cover |
| 7 | Viewing window |
| 8 | Dust protection |
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.