Description
The ball valve is used as a shut-off valve in heating, water supply, steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) not aggressive to valve materials.
Pneumatic DNOVA rotary actuators with return spring PA-DA are designed for automation of industrial valve control process with maximum torque up to 2128 Nm.
Technical parameters of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-H, full bore flanged, stainless steel SS316, seal - PTFE
| Parameter | Value |
|---|---|
| Operating Medium Temperature, °C | -50 to 200 |
| Application | Heating Supply |
| Working Medium | Water, Air, Steam, Technical Water, Oil, Petroleum Products |
| Pipeline Connection | Flanged |
| Water-drawing | No |
| Type of Flow Passage | Full Bore |
| Ball Valve Tightness Class | A |
| Control Type | Pneumatic Actuator |
| Connection Type | Flanged |
| Control | Pneumatic Actuator with Return Springs |
| Limit Switches | Yes |
| Pneumatic Distributor | Yes |
| Warranty, years | 1 |
| Country of Manufacture | China |
Dimensions and dimensions of ball valves BV3232P(2pc)-FP-F-ISO-H, full bore flanged, stainless steel SS316, seal - PTFE
| DN | D, mm | L, mm | B1, mm | E, mm | ØD, mm | ØD1, mm | ØG, mm | f, mm | Т, mm | C, mm | Н2, mm |
| 15 | 15 | 114 | 153 | 72 | 95 | 65 | 35 | 2 | 8 | 120 | 50 |
| 20 | 20 | 120 | 153 | 72 | 104 | 75 | 43 | 2 | 8.9 | 120 | 55 |
| 25 | 25 | 125 | 174 | 89 | 113 | 85 | 51 | 2 | 9.6 | 120 | 60 |
| 32 | 32 | 130 | 174 | 89 | 139 | 100 | 64 | 2 | 11.2 | 120 | 65 |
Table of parts and materials for ball valves DNOVA BV3232P(2pc)-FP-F-ISO-H, full bore flanged, stainless steel SS316, seal - PTFE
| № | Part Name | Material |
|---|---|---|
| 1 | Body | Steel 316 |
| 2 | Ball Seal | RPTFE |
| 3 | Ball | Steel 316 |
| 4,6,12 | Bolt, Nut | Steel 304 |
| 5,10 | Seal | PTFE |
| 7 | Pipe Section | Steel 316 |
| 8 | Stem | Steel 316 |
| 9 | Packing | PTFE |
| 11 | Packing | Steel 304 |
Parts and materials sketch for ball valves DNOVA BV3232P(2pc)-FP-F-ISO-H, full bore flanged, stainless steel SS316, seal - PTFE
Technical parameters of pneumatic actuator DNOVA
| Parameter | Value |
|---|---|
| Operating Pressure, bar | 6 |
| Working Medium | Filtered compressed air or non-aggressive gases, oils |
| Manual Override | helm |
Dimensions and dimensions of pneumatic actuator DNOVA
| Model | DA-065 |
| G, mm | 15 |
| M, mm | 80 |
| N, mm | 30 |
| f0, mm | 34 |
| P, mm | 20 |
| B1, mm | 174 |
| C, mm | 36 |
| E, mm | 89 |
| J | 4-M6x10 |
| K | 4-M8x12 |
| F, mm | 26 |
| A1, mm | 125 |
| D, mm | 46 |
| H | F05 |
| I | F07 |
| L | 14x14 |
Sketch of dimensions and dimensions of pneumatic actuator DNOVA
Parts and materials table for pneumatic actuator DNOVA
| № | Name | Qty | Material | Coating |
|---|---|---|---|---|
| 1 | Housing | 1 | Extruded aluminum | Hard anodized |
| 2 | Side plugs | 2 | Cast aluminum | |
| 3 | Gear | 1 | Stainless steel | Nickel-plated |
| 4 | Piston | 2 | Steel/Aluminum | Oxidation/Galvanic zinc coating |
| 5 | Plugs | 8 | Stainless steel | |
| 6 | Piston ring | 2 | NBR | |
| 7 | Springs | 0-12 | Spring steel | Epoxy coating |
| 8 | Piston bearing | 2 | Engineering plastic | |
| 9 | Piston ring | 2 | NBR | |
| 10 | Plug | 2 | NBR | |
| 11 | Stop ring | 2 | Engineering plastic | |
| 12 | Ring | 1 | Engineering plastic | |
| 13 | Washer | 1 | Stainless steel | |
| 14 | Spring clamp | 2 | Stainless steel | |
| 15 | Indicator | 1 | Plastic | |
| 16 | Indicator housing | 1 | Plastic | |
| 17 | Bearing | 1 | Engineering plastic | |
| 18 | Cam | 1 | Steel | Oxidation/Galvanic zinc coating |
| 19 | Bearing | 1 | NBR | |
| 20 | Bearing | 1 | Engineering plastic | |
| 21 | Bearing | 1 | Engineering plastic | |
| 22 | Sealing ring | 2 | NBR | |
| 23 | Sealing ring | 2 | NBR | |
| 24 | Bearing | 2 | Stainless steel | |
| 25 | Adjustment nut | 2 | Stainless steel | |
| 26 | Adjustment screw | 2 | Stainless steel | |
| 27 | Bushing | 2 | Aluminum |
Technical parameters of pneumatic valve DNOVA 4V320-08 220V
| Name | Value |
|---|---|
| Pneumatic distributor model | 4V320-08 220V |
| Operating pressure, bar | 1.5 ÷ 8 |
| Supply voltage, V | 220V |
| Actuation frequency, cycles/sec | 5 |
Dimensions and dimensions of DNOVA 4V320-08 220V pneumatic directional control valve
| Model | 4V320-08 |
| A, mm | 71.9 |
| B, mm | 45 |
| C, mm | 94.4 |
| D, mm | 27 |
| E, mm | 69 |
| F, mm | 40 |
| I, mm | 24 |
| K, mm | 40 |
| L, mm | 188.8 |
| M, mm | 69.4 |
| N, mm | 50 |
| O, mm | 83.4 |
| P, mm | 22 |
| S, mm | 20 |
| T, mm | 6.5 |
| U, mm | 2.4 |
| H, mm | 82.4 |
Technical parameters of handwheels DNOVA MON
| Name | Value |
|---|---|
| Mounting Method | Horizontal/Vertical |
| Protection Rating, IP | 67 |
| Connection Type | ISO 5211 |
Dimensions and dimensions of the handwheel DNOVA
| Model | HDM-1 |
| b1, mm | 14 |
| N, mm | 22 |
| b2, mm | 14 |
| M, mm | 16 |
| D1, mm | 50 |
| D2, mm | 70 |
| D3, mm | 50 |
| D4, mm | 70 |
| ØC, mm | 88 |
| C, mm | 120 |
| A, mm | 90 |
| F, mm | 115 |
| Y, mm | 145 |
| 4-M1 | 4-M6 |
| 4-M2 | 4-M8 |
| 4-Ø1 | 4-Ø6.5 |
| 4-Ø2 | 4-Ø8.5 |
| E, mm | 70x70 |
| B, mm | 55 |
| S, mm | 53 |
| K, mm | 10 |
| T, mm | 145 |
Sketch of dimensions and dimensions of the DNOVA handwheel
Parts and materials table for handwheel DNOVA MON
| № | Name | Material |
|---|---|---|
| 1 | Stem for Pneumatic Actuator Installation | Steel 45 |
| 2 | O-Ring | EPDM |
| 3 | Retaining Spring | Spring Steel |
| 4 | Upper End Cap | Aluminum Alloy |
| 5 | Screw | Steel 304 |
| 6 | Retaining Bracket (Main Link) | Steel 304 |
| 7 | Housing | Aluminum Alloy |
| 8 | O-Ring | EPDM |
| 9 | Gearbox | Ductile Iron QT50 |
| 10 | Adapter Coupling | Ductile Iron QT40 |
| 11 | Gearbox Stem | Ductile Iron QT40 |
Passports and certificates
Data sheet for DNOVA DA/SA double-acting pneumatic actuator with return spring
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.