How it works
Electric quarter-turn actuator
Butterfly disc
The number that matters
Nominal pressure
16bar
The pressure class of the valve body at 20 °C. Working limits depend on the medium and its temperature.
Construction
Parts and materials
Applications
Media and industries
- Water
- Oils
- Hydrocarbons
- Water Supply
- Heat Supply
Rotary disc gate valve is designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
Electric actuator with spring return is designed for safe control of valves or dampers in case of power supply voltage loss. They are used in various industries. Principle of operation: this actuator is applicable in short-term mode S2 with the duration of switching on 20 minutes. The actuators are powered from the AC mains 220V 50Hz 1 phase. When the actuator is energised, the valve shut-off valve is set in motion and the spring is compressed. When the power supply is switched off, the spring is unclamped, actuating the actuator and ensuring return of the valve shut-off body to the initial position (full opening or full closing).
Technical characteristics of butterfly valves DNOVA WBV1132N-2W-Fb-H interflanged, body - cast iron GG25, disc - stainless steel 316L, seal - NBR, with electric quarter turn actuator DNOVA QTSA-N-EM-O0-220VAC
| Name | Value |
|---|---|
| Nominal Pressure, bar | 16 |
| Connection Type | Flanged |
| Control Type | Electric Actuator |
| Application | Water Supply, Heating Supply |
| Working Medium Temperature, °C | From -20 to 120 |
| Tightness Class | A |
| Country of Manufacture | China |
Overall and installation dimensions of the gate valve DNOVA WBV1132N-2W-Fb-H DN40
| DN | A | B | C | E | L | ØD | Ød | 4-Ødo | HxH | bore diameter |
| 40 | 114 | 66 | 26 | 34 | 210 | 65 | 50 | 4-7 | 9x9 | 50 |
Sketch Butterfly valves WBV1132N-2W-Fb-H DN40
Dimensions and dimensions of butterfly valves DNOVA WBV1132N-2W-Fb-H interflanged, body - cast iron GG25, disc - stainless steel 316L, seal - NBR, with electric quarter turn actuator DNOVA QTSA-N-EM-O0-220VAC
| DN | E, mm | A, mm | B, mm | A1, mm |
| 40 | 34 | 114 | 66 | 229 |
| 50 | 43 | 131 | 72 | 229 |
| 65 | 46 | 140 | 83 | 266 |
| 80 | 46 | 150 | 95 | 266 |
| 100 | 52 | 163 | 112 | 377 |
| 125 | 56 | 178 | 125 | 377 |
| 150 | 56 | 191 | 140 | 377 |
| 200 | 60 | 238 | 172 | 406 |
Dimensions and dimensions of butterfly valves DNOVA WBV1132N-2W-Fb-H interflanged, body - cast iron GG25, disc - stainless steel 316L, seal - NBR, with electric quarter turn actuator DNOVA QTSA-N-EM-O0-220VAC
Table of parts and materials for butterfly valves DNOVA WBV1132N-2W-Fb-H interflanged, body - cast iron GG25, disc - stainless steel 316L, seal - NBR, with electric quarter turn actuator DNOVA QTSA-N-EM-O0-220VAC
| # | Detail | Material |
|---|---|---|
| 1 | Body | Cast iron GGG50 |
| 2 | Disc | Steel 316L |
| 3 | Seat Seal | EPDM |
| 4 | Upper Stem | Steel 316L |
| 5 | Lower Stem | Steel 316L |
| 6, 11 | Locking Ring | Steel AISI 201 |
| 7 | Dust Cover | NBR |
| 8 | Stem Seal | NBR |
| 9 | Insert | Steel AISI 201 |
| 10 | Plug | Plastic |
| 12 | Electric Actuator Body | Aluminum alloy AL104 |
| 13 | Electric Actuator Top Cover | Aluminum alloy ADC12 |
Sketch of parts and materials of rotary disc gate valves DNOVA WBV1132N-2W-Fb-H interflanged, body - cast iron GG25, disc - stainless steel 316L, seal - NBR, with electric quarter turn actuator DNOVA QTSA-N-EM-O0-220VAC
Technical parameters of quarter-turn actuators DNOVA QTSA-N-EM-O0-220VAC with spring return, square 14x14-27x27, torque 30-300Nm
| Name | Value |
|---|---|
| Type of Electric Actuator | Quarter-turn with Spring Return |
| Power Supply Voltage, V | 220V |
| Rotation Angle, ° | 90±5 |
| Mechanical Stop | Yes |
| Average Lifespan, Open/Close Cycles | 100,000 |
| Enclosure Protection Rating, IP | 67 |
| Explosion Protection | No |
| Ambient Temperature, °C | -25°C to +65°C |
| Country of Manufacture | China |
Dimensions and dimensions of electric quarter-turn actuators DNOVA QTSA-N-EM-O0-220VAC with spring return, square 14x14-27x27, torque 30-300Nm
| Model | A | B | C | D | E | H |
| QTSA-N-003EM-O0-220VAC | 229 | 303 | 162 | 145 | 75 | 17 |
| QTSA-N-005EM-O0-220VAC | 266 | 380 | 199 | 177 | 96 | 19 |
| QTSA-N-007EM-O0-220VAC | 266 | 380 | 199 | 177 | 96 | 19 |
| QTSA-N-014EM-O0-220VAC | 377 | 436 | 240 | 206 | 120 | 25 |
| QTSA-N-020EM-O0-220VAC | 377 | 436 | 240 | 206 | 120 | 25 |
| QTSA-N-030EM-O0-220VAC | 406 | 535 | 280 | 260 | 120 | 30 |
Sketch of dimensions and dimensions of quarter-turn actuators DNOVA QTSA-N-EM-O0-220VAC with spring return, square 14x14-27x27, torque 30-300Nm
Parts and materials table for quarter-turn actuators DNOVA QTSA-N-EM-O0-220VAC with spring return, square 14x14-27x27, torque 30-300Nm
| № | Part Name | Material |
|---|---|---|
| 1 | Top Cover | Aluminum Alloy ADC12 |
| 2 | Housing | Aluminum Alloy AL104 |
| 3 | Side Cover | Aluminum Alloy ADC12 |
| 4 | Cable Gland | Nylon |
| 5 | Return Springs | Spring Steel |
| 6 | Piston | Aluminum Alloy ADC12 |
| 7 | Separator Block | Carbon Steel 45 |
| 8 | Drive Mechanism | Alloy Steel 40Cr |
| 9 | Viewing Window | Tempered Glass |
| 10 | Cable Gland (Fireproof) | Fireproof Nylon |
| 11 | Heater | Ceramic |
| 12 | Electric Motor | Integrated Assembly |
| 13 | Adjustment Cam | Aluminum Alloy ADC12 |
| 14 | Limit Micro Switches | Integrated Assembly |
| 15 | Mounting Plate | Carbon Steel Q235 |
| 16 | Output Shaft | Carbon Steel 45 |
| 17 | Bearing | Stainless Steel |
| 18 | Position Indicator | Nylon |
| 19 | Capacitor | Composite Material |
| 20 | Terminal Block | Integrated Assembly |
Sketch of parts and materials of quarter-turn actuators DNOVA QTSA-N-EM-O0-220VAC with spring return, square 14x14-27x27, torque 30-300Nm
- Body material
- Grey cast iron GG25
- Maximum allowable temperature
- 120 °C
- Connection type
- Compact flanged
- Control type
- Electric actuator
- Operating environment
- Water, Oils, and Hydrocarbons
- Applications
- Water Supply and Heat Supply
- Nominal pressure
- 16 bar
- Type of seal
- NBR
- Disc material
- Stainless steel 316L
- Country of origin
- China
Production. Usually 7–14 business days after you approve the quotation and pay. Made-to-specification items are confirmed in the quotation.
Freight. Not charged at checkout. A manager quotes air and sea freight to your port or airport, and nothing ships until you approve the price and the freight.
To North America. From approval and payment to the destination port or airport: air 14–24 days, sea 32–60 days. Estimates, not guarantees.
Terms. EXW Ningbo or FOB Ningbo Port; CIF on request. The agreed term is written on the Proforma Invoice.
Total items
Product subtotal