How it works
Double-acting rotary actuator
Butterfly disc
Limit-switch box
The number that matters
Nominal pressure
16bar
The pressure class of the valve body at 20 °C. Working limits depend on the medium and its temperature.
Construction
Parts and materials
A water butterfly valve is a type of valve used to control the flow of water or other fluids through a pipeline. It gets its name from the butterfly-shaped disc inside the valve that rotates to open or close the flow. When the valve is fully open, the disc is positioned parallel to the flow direction, allowing unobstructed passage of water. When the valve is closed, the disc is turned perpendicular to the flow, effectively blocking the flow of water. Water butterfly valves are commonly used in various industries and applications, including water treatment plants, sewage systems, irrigation systems, and industrial processes. They are known for their compact design, lightweight construction, and ease of installation. These valves are often preferred for their quick operation, as the disc can be opened or closed with a simple quarter-turn motion. Butterfly valves can be operated manually with a handle or lever, or they can be automated using electric, pneumatic, or hydraulic actuators to control the valve remotely. They are known for their low-pressure drop and relatively low cost compared to other types of valves. It's worth noting that water butterfly valves are specifically designed for use with water and compatible fluids. Different materials and designs may be required for valves intended for use with corrosive or high-pressure fluids. It's important to select the appropriate type of butterfly valve based on the specific application and fluid requirements.
Technical parameters of water butterfly valve DNOVA WBV1132N-2W-Fb body material - Cast iron GG25, disk material - Stainless steel aisi 316l, seal - NBR with double-acting pneumatic actuator DA and limit switch block APL-510N-EX:
| Nominal diameter DN, mm | 40-200 |
| Working pressure PN, bar | 16 |
| Operating medium temperature t, °C | from -20 to +120 |
| Operating medium | cold and hot water, air without oil and grease, other media neutral to the material |
| Flow direction | two-way |
| Body material | cast iron |
| Type of control | manual (handle) |
| Optional | electric or pneumatic actuator possible (ISO 5211-2001) |
Materials of water butterfly valve DNOVA WBV1132N-2W-Fb body material - Cast iron GG25, disk material - Stainless steel aisi 316l, seal - NBR with double-acting pneumatic actuator DA and limit switch block APL-510N-EX:
| № | Part name | Material |
| 1 | Body | cast iron |
| 2 | Seat seal | NBR |
| 3 | Disk | Stainless steel 316L |
| 4 | Stem | SS AISI 416 |
| 5 | Pin | SS AISI 420 |
| 6 | Bushing | PTFE |
| 7 | O-ring | NBR |
| 8 | Plate | carbon steel |
| 9 | Handle | ductile iron |
Overall and installation dimensions of water butterfly valve DNOVA WBV1132N-2W-Fb body material - Cast iron GG25, disk material - Stainless steel aisi 316l, seal - NBR with double-acting pneumatic actuator DA and limit switch block APL-510N-EX:
| DN | A | C | K | L1 | E |
| 40 | 114 | 153 | 121.4 | 153 | 34 |
| 50 | 131 | 174 | 121.4 | 174 | 43 |
| 65 | 140 | 174 | 121.4 | 174 | 46 |
| 80 | 150 | 216 | 121.4 | 216 | 46 |
| 100 | 163 | 216 | 121.4 | 216 | 52 |
| 125 | 178 | 279 | 121.4 | 279 | 56 |
| 150 | 191 | 279 | 121.4 | 279 | 56 |
| 200 | 238 | 308 | 121.4 | 308 | 60 |
| 250 | 285 | 405 | 121.4 | 405 | 68 |
| 300 | 315 | 465 | 121.4 | 465 | 78 |
Technical characteristics of DA pneumatic actuators:
| Design | Double-acting | |
| Nominal pressure PN, bar | 12 | |
| Operating pressure, bar | 2…8 | |
| Operating medium | Filtered compressed air or non-aggressive gases, oils | |
| Maximum particle diameter | less than 30 µm2 | |
| Operating temperature t, °C | • from -20 to +80 • from -40 to +80 (low-temperature version) • from -20 to +160 (in dry air) |
|
| Adjustment range | ± 5° for rotation at 0° and 90° | |
| Manual duplication | yes | |
| Position indicator | open/closed | |
| Operating environment | indoors and outdoors. (All internal and external parts have an anti-corrosion coating) | |
Pneumatic actuator component materials DNOVA DA:
| № | Name | Material |
| 1 | Body | extruded aluminum |
| 2 | Side caps | cast aluminum |
| 3 | Gear | stainless steel |
| 4 | Piston | steel/aluminum |
| 5 | Plugs | stainless steel |
| 6 | Piston ring | NBR |
| 7 | Springs | spring steel |
| 8 | Piston bearing | engineering plastic |
| 9 | Piston ring | NBR |
| 10 | Plug | NBR |
| 11 | Thrust ring | engineering plastic |
| 12 | Ring | engineering plastic |
| 13 | Washer | stainless steel |
| 14 | Spring clip | stainless steel |
| 15 | Indicator | plastic |
| 16 | Indicator body | plastic |
| 17 | Bearing | engineering plastic |
| 18 | Cam | steel |
| 19 | Bearing | NBR |
| 20 | Bearing | engineering plastic |
| 21 | Bearing | engineering plastic |
| 22 | O-ring | NBR |
| 23 | O-ring | NBR |
| 24 | Bearing | stainless steel |
| 25 | Adjustment nut | stainless steel |
| 26 | Adjustment screw | stainless steel |
| 27 | Bushing | aluminum |
Characteristics of limit switch unit APL-510N-EX:
| Parameter | Value |
| Body | weatherproof IP67/ NEMA4 4X,7,9 explosion-proof E EX d IIC T6 |
| Compatible devices | - quarter-turn pneumatic actuators; - any actuators with a 90° shaft rotation |
| Full swivel angle | 90° |
| Cable glands | 2 x NPT 3/4” |
| Electrical connection | Screw terminal clamps, 8 points (0.08 – 2.5 mm²) |
| Cable entry thread | 2 x NPT 3/4” |
| Type of visual indicator | two-color hemisphere: OPEN (Open) - yellow CLOSED (Closed) - red |
| Switches/sensors | two mechanical switches two proximity sensors |
| Nominal voltage, V | 250 |
| Nominal current, A | 16 |
| Permissible ambient temperature, °C | from -20 to +66 |
| Average life, cycles | 10 000 000 |
| Weight, kg | 1.8 |
- Body material
- Cast iron GG25/EN-GJL-250
- Maximum allowable temperature
- 120 °C
- Connection type
- Compact flanged
- Control type
- Pneumatic actuator
- Nominal pressure
- 16 bar
- Type of seal
- NBR
- Disc material
- Stainless steel AISI 316L/1.4404
- Valve feedback
- Limit switches
- Explosion-proof
- Yes
- Torque
- 68 Nm
- Pneumatic actuator
- No
- Manual override
- No
- Limit switches
- Yes
- Country of origin
- China
Production. Usually 7–14 business days after you approve the quotation and pay. Made-to-specification items are confirmed in the quotation.
Freight. Not charged at checkout. A manager quotes air and sea freight to your port or airport, and nothing ships until you approve the price and the freight.
To North America. From approval and payment to the destination port or airport: air 14–24 days, sea 32–60 days. Estimates, not guarantees.
Terms. EXW Ningbo or FOB Ningbo Port; CIF on request. The agreed term is written on the Proforma Invoice.
Total items
Product subtotal