Description
Ball valves are used as shut-off valves in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve. The use of ball valves as regulating valves is not allowed.
Pneumatic DNOVA pneumatic double-acting rotary actuators PA-DA and pneumatic rotary actuators with return spring PA-SA are designed for automation of industrial valve control process with maximum torque up to 2128 Nm.
Pneumatic valve is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.
Limit switch unit is designed for visual and electrical signaling of the end positions of the shut-off body of pipeline valves.
Technical parameters of ball valves DNOVA BV3232P(2pc)-FP-T-ISO-H 16 bar, full bore coupling, stainless steel SS316, seal - PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-10 220V, with LSU APL -410N EX:
|
Parameter |
Value |
|
Working medium temperature, °C |
From -29 to 200 |
|
Application |
Heat supply |
|
Working medium |
Water, air, steam, mildly aggressive media, oils, service water, water-glycol solutions, petroleum products |
|
Pipeline connection |
Coupling (threaded) |
|
Type of passage section |
Full bore |
|
Control type |
With pneumatic actuator |
|
Connection |
Female thread |
|
Control |
Double-acting pneumatic actuator |
|
Presence of limit switches |
Yes |
|
Availability of pneumatic distributor |
Yes |
|
Warranty, years |
1 |
Dimensions and sizes of ball valves DNOVA BV3232P(2pc)-FP-T-ISO-H 16 bar, full bore coupling, stainless steel SS316, seal - PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-10 220V, with LSU APL -410N EX:
| Model | D mm | L mm | B1 mm | E mm | H2 mm | H mm |
| DN10 | 10 | 63 | 153 | 72 | 34 | 174 |
| DN15 | 15 | 58 | 153 | 72 | 37 | 174 |
| DN20 | 20 | 66 | 153 | 72 | 40 | 174 |
| DN25 | 25 | 72 | 153 | 72 | 54 | 174 |
| DN32 | 32 | 83 | 153 | 72 | 60 | 174 |
| DN40 | 40 | 95 | 174 | 89 | 70 | 174 |
| DN50 | 50 | 95 | 174 | 89 | 70 | 174 |
| DN65 | 65 | 147 | 216 | 109 | 94.5 | 174 |
| DN100 | 100 | 204 | 279 | 134 | 122 | 174 |
Table of parts and materials of ball valves DNOVA BV3232P(2pc)-FP-T-ISO-H 16 bar, full bore coupling, stainless steel SS316, seal - PTFE, with double-acting PA-DA pneumatic actuator, with pneumatic distributor 4V320-10 220V, with LSU APL -410N EX:
|
№ |
Part name |
Material |
|
1, 6 |
Body |
Steel 316 |
|
2, 4 |
Ball seal |
Polytetrafluoroethylene PTFE |
|
3 |
Ball |
Steel 316 |
|
5 |
Sealing ring |
Polytetrafluoroethylene PTFE |
|
7 |
Stem |
Steel 316 |
|
8 |
Stem seal |
VITON |
|
9 |
Stem nut |
Steel 316 |
Technical parameters of pneumatic actuator DNOVA
|
Parameter |
Value |
|
Construction |
Double-acting |
|
Working pressure, bar |
6 |
|
Working medium |
Filtered compressed air or non-aggressive gases, oils |
|
Availability of manual doubler |
No |
Dimensions and sizes of pneumatic actuator DNOVA:
| Actuator model | DA-052 | DA-065 | DA-083 | DA-105 |
| G, mm | 15 | 15 | 15 | 25 |
| M, mm | 80 | 80 | 80 | 80 |
| N, mm | 30 | 30 | 30 | 30 |
| F0, mm | 34 | 34 | 34 | 41 |
| P, mm | 20 | 20 | 20 | 20 |
| B1, mm | 153 | 174 | 216 | 279 |
| C, mm | 30 | 36 | 46 | 55 |
| E, mm | 72 | 89 | 109 | 134 |
| J | 4-M5x8 | 4-M6x10 | 4-M6x10 | 4-M8x12 |
| K | 4-M6x10 | 4-M8x12 | 4-M8x12 | 4-M10x16 |
| F, mm | 26 | 26 | 26 | 26 |
| A1, mm | 108 | 125 | 152 | 189 |
| D, mm | 41 | 46 | 55 | 64 |
| L, mm | 11x11 | 14x14 | 17x17 | 22x22 |
| H | F03 | F05 | F05 | F07 |
| I | F05 | F07 | F07 | F10 |
Parts and materials table for the pneumatic actuator DNOVA:
|
№ |
Name |
Quantity |
Material |
Coating |
|
1 |
Body |
1 |
Extruded aluminum |
Hard anodized |
|
2 |
Side plugs |
2 |
Cast aluminum |
- |
|
3 |
Gear |
1 |
Stainless steel |
Nickel-plated |
|
4 |
Piston |
2 |
Steel/Aluminum |
Oxidation/galvanized |
|
5 |
Plugs |
8 |
Stainless steel |
- |
|
6 |
Piston ring |
2 |
NBR |
- |
|
7 |
Springs |
0–12 |
Spring steel |
Epoxy coating |
|
8 |
Piston bearing |
2 |
Engineering plastic |
- |
|
9 |
Piston ring |
2 |
NBR |
- |
|
10 |
Plug |
2 |
NBR |
- |
|
11 |
Thrust ring |
2 |
Engineering plastic |
- |
|
12 |
Ring |
1 |
Engineering plastic |
- |
|
13 |
Washer |
1 |
Stainless steel |
- |
|
14 |
Spring clip |
2 |
Stainless steel |
- |
|
15 |
Indicator |
1 |
Plastic |
- |
|
16 |
Indicator body |
1 |
Plastic |
- |
|
17 |
Bearing |
1 |
Engineering plastic |
- |
|
18 |
Cam |
1 |
Steel |
Oxidation/ galvanized steel |
|
19 |
Bearing |
1 |
NBR |
- |
|
20 |
Bearing |
1 |
Engineering plastic |
- |
|
21 |
Bearing |
1 |
Engineering plastic |
- |
|
22 |
Sealing ring |
2 |
NBR |
- |
|
23 |
Sealing ring |
2 |
NBR |
- |
|
24 |
Bearing |
2 |
Stainless steel |
- |
|
25 |
Adjustment nut |
2 |
Stainless steel |
- |
|
26 |
Adjustment screw |
2 |
Stainless steel |
- |
|
27 |
Bushing |
2 |
Aluminum |
- |
Technical parameters of pneumatic valve DNOVA
|
Name |
Value |
|
Type of pneumatic valve |
Spool valve |
|
Working pressure, bar |
1.5 ÷ 8 |
|
Supply voltage, V |
220 V |
|
Full power, Va |
4.5 |
|
Control |
Two-way electromagnetic |
|
Response frequency, cycle/sec |
5 |
Dimensions and sizes of pneumatic valve DNOVA:
| Model of pneumatic valve | 4V320-10 |
| A, mm | 71.9 |
| B, mm | 45 |
| C, mm | 94.4 |
| D, mm | 27 |
| E, mm | 69 |
| F, mm | 40 |
| I, mm | 24 |
| K, mm | 40 |
| L, mm | 188.8 |
| M, mm | 69.4 |
| N, mm | 50 |
| O, mm | 83.4 |
| P, mm | 22 |
| S, mm | 20 |
| T, mm | 6.5 |
| U, mm | 2.4 |
| H, mm | 82.4 |
Technical parameters of limit switch unit DNOVA
| Name | Value |
| Maximum limit switch voltage, V | 250 |
| Degree of protection of the housing, IP | 65 |
| Operating medium temperature, °C | from -40 to +80 |
| Service life, years | 10 |
Dimensions and sizes of the limit switch unit DNOVA:
| Model | D, mm | D1, mm | H, mm | L, mm | B, mm | M, mm |
| APL-410N EX | 9.5 | 5 | 174 | 177 | 178 | 8 |
Passports and certificates
Data sheet for DNOVA DA/SA double-acting pneumatic actuator with return springs
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.