Description
DNOVA WBV1632E-2W-Fb-H butterfly valves are designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
Pneumatic valve DNOVA 4V320-08 220V is used to change direction, start, stop compressed air flows in pneumatic system depending on external control action.
The DNOVA AFC2000 air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain pressure at a preset level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system with a wide range of throughput from 500 liters/minute to 10 000 liters/minute. The lubricator adds oil with a viscosity of 32 mmВІ/s (=cSt) at 40В°C to the pneumatic system for further lubrication of control components such as pneumatic cylinders and pneumatic valves.
В
В
Technical parameters of Butterfly valves DNOVA WBV1632E-2W-Fb-H, body - cast iron QT450, disk - stainless steel 316L, EPDM
| Name | Value |
|---|---|
| Nominal pressure PN, bar | 16 |
| Operating temperature, В°C | -20 to 110 |
| Application | Water supply, heating, chemical industry, oil and gas industry, food industry |
| Pipeline connection | Wafer type |
| Valve type | Butterfly |
| Control type | Pneumatic actuator |
| Country of origin | China |
В
Dimensions and dimensions of Butterfly valves DNOVA WBV1632E-2W-Fb-H, body - cast iron QT450, disk - stainless steel 316L, EPDM
| DN | L, mm | D, mm | H, mm | F, mm | L1, mm | G, mm | X, mm | Y, mm |
| 125 | 56 | 176 | 313 | 153 | 495 | 138,4 | 88 | 162 |
| 150 | 56 | 207 | 338 | 153 | 495 | 138,4 | 88 | 162 |
Sketch of Rotary Disc GatesВ DNOVA WBV1632E-2W-Fb-H, body - cast iron QT450, disk - stainless steel 316L, EPDM
В
В
Table of parts and materials for butterfly valves DNOVA WBV1632E-2W-Fb-H, body - cast iron QT450, disk - stainless steel 316L, EPDM
| в„– | Part Name | Material |
|---|---|---|
| 1 | Body | Cast iron QT450 |
| 2 | Disc | Stainless steel 316L |
| 3 | Seat seal | EPDM + wear-resistant material (silicone + graphite) |
| 4 | Stem | Steel 2Cr13 |
Sketch of parts and materials of rotary disc gate valvesВ DNOVA WBV1632E-2W-Fb-H, body - cast iron QT450, disk - stainless steel 316L, EPDM
В
В
Technical parameters of pneumatic actuator PA-DA-105-1:
| Type of pneumatic actuator | double-acting |
| Control pressure, bar | 2 Г· 8 |
| Operating temperature, В°C | -20 to +80 |
| Visual position indicator | open / closed |
| Manual control | handwheel |
| Swivel angle, В° | 90 В± 5 |
| Top connection standard | NAMUR |
| Air connection standard | NAMUR |
| Air supply connection thread | G 1/4Кє |
| ISO flange type | F07/F10 |
| Stem square, mm | 22x22 |
| Weight, kg | 9 |
| Average life, cycles closed/open | 300 000 |
Pneumatic actuator PA-DA-105-1
В
В
Dimensions and dimensions of the pneumatic actuator PA-DA-105-1:
| A, mm | 495 |
| A1, mm | 461.5 |
| B, mm | 133 |
| C, mm | 109.5 |
| D, mm | 153 |
| E, mm | 57.5 |
| F, mm | 64 |
| G, mm | 26 |
| H, mm | 80 |
| I, mm | 30 |
| N, mm | 22 |
| W, mm | 200 |
| J, mm | 102 |
| K, mm | 70 |
| L, mm | M10x16 |
| M, mm | M8x13 |
| O, mm | 4 |
| P, mm | 4 |
| S, mm | M6 |
| T, mm | 24 |
| U, mm | 32 |
Sketch of dimensions and dimensions of pneumatic actuator PA-DA-105-1
В
В
PA-DA-105-1 air actuator parts and materials table:
| в„– | Part name | Material |
| 1 | Indicator screw | ABS (plastic) |
| 2 | Position indicator | ABS (plastic) |
| 3 | Spring clip | Stainless steel 304 |
| 4 | Washer | Stainless steel 304 |
| 5 | External washer | Engineering plastic |
| 6 | Adjustment screw | Stainless steel 304 |
| 7 | Nut | Stainless steel 304 |
| 8 | Washer | Stainless steel 304 |
| 9 | Body | Extruded aluminum alloy |
| 10 | Piston | Die cast aluminum alloy |
| 11 | Piston O-ring | NBR |
| 12 | Bearing group | Engineering plastic |
| 13 | End cap O-ring | NBR |
| 14 | End cap | Die cast aluminum alloy coated with polyester paint |
| 15 | Fixing screw | Stainless steel 304 |
| 16 | Internal washer | Engineering plastic |
| 17 | Sealing ring | NBR |
| 18 | Bearing | Engineering plastic |
| 19 | Retainer | Alloy steel |
| 20 | Gear | Alloy steel |
| 21 | Bearing | Engineering plastic |
| 22 | Sealing ring | NBR |
Parts and material sketch of the PA-DA-105-1 pneumatic actuator
В
В
Technical parameters of pneumatic valve DNOVA 4V320-08 220V
| Name | Value |
|---|---|
| Type of Pneumatic Valve | Spool-type |
| Pneumatic Valve Model | 4V320-08 220V |
| Operating Pressure, bar | 1.5 Г· 8 |
| Supply Voltage, V | 220 V |
| Actuation Frequency, cycles/sec | 5 |
В
Main parameters of air treatment unit DNOVA AFC2000
| Parameter | Value |
|---|---|
| Operating pressure, bar | 8 |
| Maximum pressure, bar | 10 |
| Adjustable pressure range, bar | 0.5 Г· 9 |
| Burst pressure, bar | 15 |
| Air connection | 1/4" |
| Operating temperature, В°C | -5 to +60 |
| Filtered particle size, Вµm | 40 |
| Oil viscosity | ISO VG 32 |
| Weight, kg | 0.395 |
| Set contents | Filter-water separator, pressure regulator, lubricator, bracket |
Sketch of BPV DNOVA AFC2000
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.