Ball valves DNOVA BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flange

1 1

Ball valves DNOVA BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, s mon/drive PA-DA, mon/distribution 4M310-08 220V, LSU APL-410N EX, backup MON3-700-T38-ISO and ATU A

From $628.22 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Description

The ball valve is used as a shut-off valve, as well as for mixing and separation of medium flows in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) that are not aggressive to valve materials.

Pneumatic actuators DNOVA double-acting rotary actuators PA-DA are designed to automate the process of controlling industrial valves with maximum torque up to 2128 Nm.

Technical parameters of ball valves DNOVA BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19

Parameter	Value
Nominal Pressure PN, bar	16
Operating Medium Temperature, °C	from -25 to 180
Valve Type	Three-way
Three-Way Valve Type	L
Application	Water supply, Heating
Working Medium	Water, Steam, Petroleum products, Neutral media, Gaseous media
Pipeline Connection	Flanged
Water Draw-Off	No
Bore Type	Full bore
Tightness Class	A
Control Type	With pneumatic actuator
Connection Type	Flanged
Actuation	Double-acting pneumatic actuator
Limit Switches	Yes
Pneumatic Valve	Yes
Electropneumatic Positioner	No
Average Service Life, years	10
Warranty, years	1
Country of Manufacture	China

Dimensions and dimensions of ball valves DNOVA BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19

Nominal Size	L, mm	ØD, mm	ØD1, mm	ØD2, mm	A, mm	E, mm	I, mm	C, mm	B, mm	H1, mm
DN15	150	95	65	45	153	72	162	88	139	120
DN20	160	105	75	58	153	72	162	88	139	120
DN25	180	115	85	64	153	72	162	88	139	120
DN32	200	140	100	78	153	72	162	88	139	120
DN40	220	150	110	88	174	89	162	88	139	120
DN50	240	165	125	99	174	89	162	88	139	120
DN65	260	185	145	122	216	109	162	88	139	133
DN80	280	200	160	138	279	134	162	88	139	180
DN100	325	220	180	158	279	134	162	88	139	180

Sketch dimensions and dimensions of ball valves DNOVA BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19

Table of parts and materials for ball valves DNOVA BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19

№	Part Name	Material
1	Body	Stainless Steel SS316
2	Ball	Stainless Steel SS316
3	Seal	PTFE
4	Body Cover	Stainless Steel SS316
5	Bolt	Stainless Steel SS304
6	Gasket	PTFE
7	Nut	Stainless Steel SS304
8	Gasket	PTFE
9	Stem Seal	PTFE
10	Bolt	Stainless Steel SS304
11	Packing	Stainless Steel SS304

Parts and materials sketch for ball valves DNOVA BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19

Technical parameters of pneumatic actuators DNOVA

Parameter	Value
Design	Double-acting
Control Pressure, bar	2 ÷ 8

Dimensions and dimensions of pneumatic actuators DNOVA

Actuator Model	DA-052	DA-065	DA-083	DA-105
G, mm	15	15	15	25
M, mm	80	80	80	80
N, mm	30	30	30	30
Ø0, mm	34	34	34	41
R, mm	20	20	20	20
B1, mm	153	174	216	279
C, mm	30	36	46	55
E, mm	72	89	109	134
J	4-M5x8	4-M6x10	4-M6x10	4-M8x12
K	4-M6x10	4-M8x12	4-M8x12	4-M10x16
F, mm	26	26	26	26
A1, mm	108	125	152	189
D, mm	41	46	55	64
L, mm	11x11	14x14	17x17	22x22
H	F03	F05	F05	F07
I	F05	F07	F07	F10

Sketch of dimensions and dimensions of pneumatic actuator DNOVA

Parts and materials table for pneumatic actuators DNOVA

№	Name	Qty	Material	Coating
1	Body	1	Extruded Aluminum	Hard Anodized
2	End Caps	2	Cast Aluminum	—
3	Gear	1	Stainless Steel	Nickel-Plated
4	Piston	2	Steel/Aluminum	Oxidation/Galvanized Zinc Coating
5	Plugs	8	Stainless Steel	—
6	Piston Ring	2	NBR	—
7	Springs	0-12	Spring Steel	Epoxy Coating
8	Piston Bearing	2	Engineering Plastic	—
9	Piston Ring	2	NBR	—
10	Plug	2	NBR	—
11	Stop Ring	2	Engineering Plastic	—
12	Ring	1	Engineering Plastic	—
13	Washer	1	Stainless Steel	—
14	Spring Clip	2	Stainless Steel	—
15	Indicator	1	Plastic	—
16	Indicator Housing	1	Plastic	—
17	Bearing	1	Engineering Plastic	—
18	Cam	1	Steel	Oxidation/Galvanized Zinc Coating
19	Bearing	1	NBR	—
20	Bearing	1	Engineering Plastic	—
21	Bearing	1	Engineering Plastic	—
22	Sealing Ring	2	NBR	—
23	Sealing Ring	2	NBR	—
24	Bearing	2	Stainless Steel	—
25	Adjustment Nut	2	Stainless Steel	—
26	Adjustment Screw	2	Stainless Steel	—
27	Bushing	2	Aluminum	—

Technical parameters of pneumatic valves DNOVA 4M310-08

Name	Value
Type of Pneumatic Distributor	Spool-type
Model of Pneumatic Distributor	4M310-08
Working Pressure, bar	1.5 ÷ 1.8
Power Supply Voltage, V	220V
Frequency of Operation, cycle/sec	5

Technical parameters of pneumatic valves DNOVA 4M310-08

Model of Pneumatic Distributor	4M310-08
D, mm	32
E, mm	69
F, mm	40
I, mm	45
K, mm	40
L, mm	134.5
M, mm	40
N, mm	24
S, mm	27
U, mm	2.4
H, mm	17.5

Sketch of dimensions and dimensions of pneumatic valves DNOVA 4M310-08

Technical parameters of DNOVA handwheels

Name	Value
Manual Override Model	MON1-250-T26-ISO, MON2-450-T28-ISO, MON3-700-T38-ISO
Climatic Version	U, UHL, T, OM
Mounting Method	Horizontal/Vertical
Protection Degree, IP	67
Connection Type	ISO 5211

Dimensions and dimensions of DNOVA handwheels

Model	MON1-250-T26-ISO	MON2-450-T28-ISO	MON3-700-T38-ISO
b1, mm	14	17	22
N, mm	22	22	28
b2, mm	14	17	22
M, mm	16	18	22
D1, mm	Ø50	Ø70	Ø102
4-M1, mm	4-M6	4-M8	4-M10
D2, mm	Ø70	Ø102	Ø125
4-M2, mm	4-M8	4-M10	4-M12
E, mm	70×70	95×95	114×114
D3, mm	Ø50	Ø70	Ø102
4-Ø1, mm	4-Ø6.5	4-Ø8.5	4-Ø10.5
D4, mm	Ø70	Ø102	Ø125
4-Ø2, mm	4-Ø8.5	4-Ø10.5	4-Ø12.5
A, mm	90	125	140
B, mm	55	64	71
ØC, mm	Ø88	Ø110	Ø129
F, mm	115	135	166
T, mm	44	62.5	70
Y, mm	145	178	212
H, mm	120	133	180
S, mm	53	56.5	68.7
K, mm	10	13	12.5
Ø Handwheel, mm	180	200	280

Sketch of dimensions and dimensions of DNOVA handwheels

Parts and materials table for handwheels DNOVA

№	Part Name	Material
1	Shaft for pneumatic actuator mounting	Steel 45
2, 8	O-ring	EPDM
3	Retaining spring	Spring steel
4	Upper end cover	Aluminum alloy
5	Screw	Steel 304
6	Retaining clip (main link)	Steel 304
7	Housing	Aluminum alloy
9	Gearbox	Cast iron
10	Adapter coupling	Cast iron
11	Gearbox shaft	Cast iron

Sketch of parts and materials of manual doublers DNOVA

Technical parameters of limit switch units DNOVA APL-410N EX

Name	Value
Limit Switch Box Model	APL-410N EX
Enclosure Protection Rating, IP	65
Service Life, years	10

Dimensions and dimensions of DNOVA APL-410N EX limit switch units

Model	D, mm	D1, mm	H, mm	L, mm	B, mm	M, mm
APL-410N EX	9.5	5	174	177	178	8

Sketch of dimensions and dimensions of DNOVA APL-410N EX limit switch units

Technical parameters of DNOVA AFC2000 air treatment units

Name	Value
Working Pressure, bar	8
Adjustable Pressure Range, bar	0.5 ÷ 9
Filtered Particle Size, μm	40 μm
Weight, kg	0.395

Dimensions and dimensions of DNOVA AFC2000 air treatment units

Model	AFC2000
A, mm	162
B, mm	88
C, mm	139
D, mm	31
E, mm	53.5
F, mm	12
G, mm	8
H, mm	7
I, mm	13.3
J, mm	39
K, mm	5
L, mm	40
M, mm	32
N, mm	53
O, mm	29
P, mm	6
R, mm	41.5

Sketch of dimensions and dimensions of air treatment units DNOVA AFC2000

Specifications

Country of origin

China

Port opening

full bore

Body material

Stainless steel AISI 316

Maximum allowable temperature

180 °C

Connection type

Flanged

Control type

Pneumatically actuated

Operating environment

Water, Steam, Petroleum Products, Neutral Media, Gaseous Media

Type of seal

PTFE

Voltage

220V

Explosion-proof

have

Torque

157 Nm

Limit switches

have

Type of pneumatic actuator

double action

Delivery

The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.

To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.

Please feel free to reach out to us for any questions or further assistance regarding your order.

Your cart
Variant	Variant total	Quantity	Price	Variant total
DN100 / 16 barD160-43345	DN100 / 16 barD160-43345 $628.22/ea	$0.00	Quantity	$628.22/ea	$0.00

DN15 / 16 barD160-42129	DN15 / 16 barD160-42129 $135.73/ea	$0.00	Quantity	$135.73/ea	$0.00

DN20 / 16 barD160-42281	DN20 / 16 barD160-42281 $149.67/ea	$0.00	Quantity	$149.67/ea	$0.00

DN25 / 16 barD160-42433	DN25 / 16 barD160-42433 $158.75/ea	$0.00	Quantity	$158.75/ea	$0.00

DN32 / 16 barD160-42585	DN32 / 16 barD160-42585 $0.00/ea	$0.00	Quantity Sold out	$0.00/ea	$0.00

DN40 / 16 barD160-42737	DN40 / 16 barD160-42737 $233.48/ea	$0.00	Quantity	$233.48/ea	$0.00

DN50 / 16 barD160-42889	DN50 / 16 barD160-42889 $0.00/ea	$0.00	Quantity Sold out	$0.00/ea	$0.00

DN65 / 16 barD160-43041	DN65 / 16 barD160-43041 $377.61/ea	$0.00	Quantity	$377.61/ea	$0.00

DN80 / 16 barD160-43193	DN80 / 16 barD160-43193 $524.16/ea	$0.00	Quantity	$524.16/ea	$0.00

View cart

Total items

$0.00

Product subtotal

Taxes included. Discounts and shipping calculated at checkout.

View cart

Didn't Find What You're Looking For?

Get a Personalized Quote from Our Team
Provide us with your specific requirements, technical specifications, and parameters. Our team of experts will carefully evaluate your needs and select the most suitable equipment for you, ensuring the best possible timeframe and competitive pricing.

Item added to your cart