Description
Butterfly valves are designed for use as shut-off or regulating valves for controlling flows in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries. The valves are opened and closed by turning the disk by 90°. Opening is performed by turning the handle counterclockwise, closing - clockwise.
PA-DA double-acting pneumatic rotary actuators are designed to automate the process of controlling industrial valves with maximum torque up to 2128 Nm.
The manual doubleturn actuator with worm gear and HDM reduction gearbox allows manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.
The electropneumatic rotary positioner is used to control pneumatic rotary actuators using an electric controller or control system with a 4 to 20 mA analog DC output signal range.
Technical parameters of Water Butterfly Valve DNOVA WBV1616E-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - EPDM, with pneumatic actuator double action PA-DA, handwheel MON, electropneumatic rotary positioner YT-1000RSN without feedback:
| Nominal diameter DN, mm | 50-150 |
| Nominal pressure PN, bar | 16 |
| Working medium temperature t, ⁰C | NBR - -10 to +90 EPDM - -20 to +100 |
| Working medium | NBR - water, mineral oils, hydrocarbons, oils, fats EPDM - cold and hot water, air without oil and grease impurities, other media. oil and grease impurities, other environments material neutral |
| Flow direction | double-sided |
| Connection to pipeline | interflanged |
| Body material | cast iron QT450 |
| Disk material | cast iron QT450 / stainless steel 304 |
| Seal material | NBR / EPDM |
| Service life, years | 10 |
Butterfly valves WBV1616E-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - EPDM, with pneumatic actuator double action PA-DA, handwheel MON, electropneumatic rotary positioner YT-1000RSN without feedback
Dimensions and dimensions of butterfly valves DNOVA WBV1616E-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - EPDM, with pneumatic actuator double action PA-DA, handwheel MON, electropneumatic rotary positioner YT-1000RSN without feedback:
| DN | H, mm | A, mm | E, mm | S, mm | C, mm | H1, mm |
| 50 | 203 | 174 | 89 | 62.5 | 117.5 | 120 |
| 65 | 224 | 174 | 89 | 62.5 | 117.5 | 120 |
| 80 | 248 | 216 | 109 | 62.5 | 117.5 | 133 |
| 100 | 277.5 | 216 | 109 | 62.5 | 117.5 | 133 |
| 125 | 317.5 | 279 | 134 | 62.5 | 117.5 | 180 |
| 150 | 354.5 | 279 | 134 | 62.5 | 117.5 | 180 |
Sketch Butterfly valves WBV1616E-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - EPDM, with pneumatic actuator double action PA-DA, handwheel MON, electropneumatic rotary positioner YT-1000RSN without feedback
Materials of butterfly valves DNOVA WBV1616E-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - EPDM, with pneumatic actuator double action PA-DA, handwheel MON, electropneumatic rotary positioner YT-1000RSN without feedback:
| № | Details | Material |
| 1 | Body | cast iron QT450 |
| 2 | Disk | cast iron QT450 |
| 3 | Seat seal | EPDM |
| 4 | Rod | stainless steel SS 316 |
Sketch of parts and materials Butterfly valves WBV1616E-2W-Fb-H, body material - cast iron QT450, disk material - cast iron QT450, seal - EPDM, with pneumatic actuator double action PA-DA, handwheel MON, electropneumatic rotary positioner YT-1000RSN without feedback
Technical data of PA-DA pneumatic actuators:
| Design | Double action |
| Nominal pressure PN, bar | 12 |
| Working pressure, bar | 2...8 |
| Working medium | Filtered compressed air or non-aggressive gases, oils |
| Maximum particle diameter | less than 30 µm2 |
| Operating temperature t, ⁰C | - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air) |
| Adjustment range | ± 5 ° for rotation at 0 ° and 90 ° |
| Manual override | is |
| Position indicator | open/closed |
| Operating environment | indoors and outdoors. (All internal and external parts are anti-corrosion coated) |
PA-DA pneumatic actuator
PA-DA pneumatic actuator component materials:
| № | Name | Material |
| 1 | Enclosure | extruded aluminum |
| 2 | Side plugs | cast aluminum |
| 3 | Gear | stainless steel |
| 4 | Piston | steel/aluminum |
| 5 | Plugs | stainless steel |
| 6 | Piston ring | NBR |
| 7 | Springs | spring steel |
| 8 | Piston bearing | engineering plastic |
| 9 | Piston ring | NBR |
| 10 | Plug | NBR |
| 11 | Thrust ring | engineering plastic |
| 12 | Ring | engineering plastic |
| 13 | Washer | stainless steel |
| 14 | Spring clip | stainless steel |
| 15 | Indicator | plastic |
| 16 | Indicator housing | plastic |
| 17 | Bearing | engineering plastic |
| 18 | Cam | steel |
| 19 | Bearing | NBR |
| 20 | Bearing | engineering plastic |
| 21 | Bearing | engineering plastic |
| 22 | Sealing ring | NBR |
| 23 | Sealing ring | NBR |
| 24 | Bearing | stainless steel |
| 25 | Adjustment nut | stainless steel |
| 26 | Adjustment screw | stainless steel |
| 27 | Sleeve | aluminum |
Parts and material sketch of the PA-DA pneumatic actuator
Technical parameters of the handwheel MON:
| Name | Value |
| Climatic version | U,UHL,T,OM |
| Degree of protection, IP | 67 |
| Connection type | ISO 5211 |
Manual doubler MON
Dimensions and dimensions of the handwheel MON:
| Model | MON1-250-T26-ISO | MON2-450-T28-ISO | MON3-700-T38-ISO | MON4-1200-T54-ISO |
| b1, mm | 14 | 17 | 22 | 27 |
| N, mm | 22 | 22 | 28 | 32 |
| b2, mm | 14 | 17 | 22 | 27 |
| M, mm | 16 | 18 | 22 | 30 |
| D1, mm | Ø50 | Ø70 | Ø102 | Ø102 |
| 4-M1, mm | 4-M6 | 4-M8 | 4-M10 | 4-M10 |
| D2, mm | Ø70 | Ø102 | Ø125 | Ø125 |
| 4-M2, mm | 4-M8 | 4-M10 | 4-M12 | 4-M12 |
| E, mm | 70x70 | 95x95 | 114x114 | 129x129 |
| D3, mm | Ø50 | Ø70 | Ø102 | Ø125 |
| 4-Ø1, mm | 4-Ø6.5 | 4-Ø8.5 | 4-Ø10.5 | 4-Ø12.5 |
| D4, mm | Ø70 | Ø102 | Ø125 | Ø140 |
| 4-Ø2, mm | 4-Ø8.5 | 4-Ø10.5 | 4-Ø12.5 | 4-Ø16.5 |
| A, mm | 90 | 125 | 140 | 188.5 |
| B, mm | 55 | 64 | 71 | 93 |
| ØC, mm | Ø88 | Ø110 | Ø129 | Ø174 |
| F, mm | 115 | 135 | 166 | 202 |
| T, mm | 44 | 62.5 | 70 | 94 |
| Y, mm | 145 | 178 | 212 | 280 |
| H, mm | 120 | 133 | 180 | 195 |
| S, mm | 53 | 56.5 | 68.7 | 84 |
| K, mm | 10 | 13 | 12.5 | 15 |
| Ø hand wheel, mm | 180 | 200 | 280 | 320 |
Sketch of dimensions and dimensions of the MON handwheel MON
MON handwheel materials:
| № | Name | Material |
| 1 | Stem for mounting the pneumatic actuator | Steel 45 |
| 2 | Sealing ring | EPDM |
| 3 | Fixing spring | Spring steel |
| 4 | Upper end cover | Aluminum alloy |
| 5 | Screw | Steel 304 |
| 6 | Locking bracket (main rod) | Steel 304 |
| 7 | Housing | Aluminum alloy |
| 8 | Sealing ring | EPDM |
| 9 | Gear unit | Cast iron BCh50 |
| 10 | Transition coupling | Cast iron BCh40 |
| 11 | Gear stem | Cast iron BCh40 |
Materials of the handwheel
Technical parameters of electropneumatic rotary positioners:
| Name | Value |
| Control input signal, mA | 4 ~ 20 |
| Internal resistance, Ohm | 250(±15) |
| Input pressure, bar | 1,4~7 |
| Lever travel angle | 0~90° |
| Compressed air connection thread | 1/4″ |
| Pressure gauge connection thread | 1/8″ |
| Cable gland | G1/2″ |
| Protection type | IP66 |
| Compressed air flow rate, l/min | 3 |
| Output air flow rate, l/min | 80 |
| Housing material | aluminum casting |
Electropneumatic rotary positioners
Dimensions and dimensions of electropneumatic rotary positioners:
| Positioner model | YT-1000RSI |
| A, mm | 224.3 |
| B, mm | 166.5 |
| C, mm | 117.5 |
| D, mm | 132.3 |
| E, mm | 6 |
| F, mm | 122 |
| G, mm | 45 |
| H, mm | 45 |
| I, mm | 23 |
| J, mm | 27 |
| K, mm | 32.5 |
| L, mm | 35.5 |
| M, mm | 91.8 |
| N, mm | 37.2 |
| O, mm | 43.5 |
| P, mm | 26.5 |
| Q, mm | 33 |
| R, mm | 80.25 |
| S, mm | 62.5 |
| T, mm | 8 |
| U1, mm | 70 |
| U2, mm | 93 |
| V1, mm | 40 |
| V2, mm | 63 |
| W, mm | 26 |
| X, mm | 32 |
| Y, mm | 9 |
| Z, mm | 24 |
Sketch of dimensions and dimensions of electropneumatic rotary positioners
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.