Description
The ball valve is used as a shut-off valve, as well as for mixing and separating the working medium flows in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the valve materials.
Pneumatic actuators DNOVA double-acting rotary PA-SA are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.
The limit switch block is designed for visual and electrical signaling of the end positions of the shut-off element of pipeline valves.
Technical parameters of ball valves DNOVA BV3232P(4pc)-FP-3WL-F DN15-100 PN16 full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with pneumatic actuator DNOVA PA-SA with return springs and LSU APL-410N EX:
| Name | Meaning |
| Nominal pressure PN, bar | 16 |
| Working environment temperature, °C | from -25 to 180 |
| Type of crane device | three-way |
| Three-way valve type | L |
| Application | water supply, heat supply |
| Working environment | water, steam, petroleum products, neutral media, gaseous media |
| Connection to the pipeline | flanged |
| Water intake | No |
| Type of flow section | full bore |
| Control type | With pneumatic drive |
| Joining | flanged |
| Control | pneumatic actuator with return springs |
| Availability of limit switches | No |
| Availability of pneumatic distributor | No |
| Availability of electropneumatic positioner | There is |
| Average service life, years | 10 |
Sketch of overall dimensions and sizes of ball valves DNOVA BV3232P(4pc)-FP-3WL-F DN15-100 PN16 full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with pneumatic actuator DNOVA PA-SA with return springs and LSU APL-410N EX
Dimensions and sizes of ball valves DNOVA BV3232P(4pc)-FP-3WL-F DN15-100 PN16 full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with pneumatic actuator DNOVA PA-SA with return springs and LSU APL-410N EX:
| Size | L, mm | ØD, mm | ØD1, mm | ØD2, mm | A, mm | E, mm |
| DN15 | 150 | 95 | 65 | 45 | 153 | 72 |
| DN20 | 160 | 105 | 75 | 58 | 174 | 89 |
| DN25 | 180 | 115 | 85 | 64 | 216 | 109 |
| DN32 | 200 | 140 | 100 | 78 | 216 | 109 |
| DN40 | 220 | 150 | 110 | 88 | 279 | 134 |
| DN50 | 240 | 165 | 125 | 99 | 279 | 134 |
| DN65 | 260 | 185 | 145 | 122 | 279 | 134 |
| DN80 | 280 | 200 | 160 | 138 | 405 | 174 |
| DN100 | 325 | 220 | 180 | 158 | 405 | 174 |
Sketch of parts and materials of ball valves DNOVA BV3232P(4pc)-FP-3WL-F DN15-100 PN16 full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with pneumatic actuator DNOVA PA-SA with return springs and LSU APL-410N EX
Table of parts and materials of ball valves DNOVA BV3232P(4pc)-FP-3WL-F DN15-100 PN16 full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with pneumatic actuator DNOVA PA-SA with return springs and LSU APL-410N EX:
| Item No. | Part name | Material |
| 1 | Frame | Stainless steel SS316 |
| 2 | Ball | Stainless steel SS316 |
| 3 | Sealing | PTFE |
| 4 | Case cover | Stainless steel SS316 |
| 5 | Bolt | Stainless steel SS304 |
| 6 | Pad | PTFE |
| 7 | screw | Stainless steel SS304 |
| 8 | Pad | PTFE |
| 9 | Rod seal | PTFE |
| 10 | Bolt | Stainless steel SS304 |
| 11 | Seal | Stainless steel SS304 |
Technical parameters of pneumatic drives DNOVA
| Name | Meaning |
| Design | with return springs |
| Control pressure, bar | 2 ÷ 8 |
| Availability of manual backup | No |
Sketch of dimensions and sizes of pneumatic actuators DNOVA
Dimensions and sizes of pneumatic actuators DNOVA
| Drive model | SA-052 | SA-065 | SA-083 | SA-105 | SA-140 |
| G, mm | 15 | 15 | 15 | 25 | 30 |
| Mmm | 80 | 80 | 80 | 80 | 130 |
| N, mm | 30 | 30 | 30 | 30 | 30 |
| F0, mm | 34 | 34 | 34 | 41 | 62 |
| R, mm | 20 | 20 | 20 | 20 | 30 |
| B1, mm | 153 | 174 | 216 | 279 | 405 |
| C, mm | 30 | 36 | 46 | 55 | 76 |
| E, mm | 72 | 89 | 109 | 134 | 174 |
| J | 4-M5x8 | 4-M6x10 | 4-M6x10 | 4-M8x12 | 4-M10x16 |
| TO | 4-M6x10 | 4-M8x12 | 4-M8x12 | 4-M10x16 | 4-M12x20 |
| F, mm | 26 | 26 | 26 | 26 | 36 |
| A1, mm | 108 | 125 | 152 | 189 | 268 |
| D, mm | 41 | 46 | 55 | 64 | 77 |
| H | F03 | F05 | F05 | F07 | F10 |
| I | F05 | F07 | F07 | F10 | F12 |
| L | 11x11 | 14x14 | 17x17 | 22x22 | 27x27 |
Table of parts and materials of pneumatic drives DNOVA
| No. | Name | Quantity | Material | Coating |
| 1 | Frame | 1 | extruded aluminum | hard anodized |
| 2 | Side plugs | 2 | cast aluminum | |
| 3 | Gear | 1 | stainless steel | nickel plated |
| 4 | Piston | 2 | steel/aluminum | oxidation/galvanic zinc plating |
| 5 | Plugs | 8 | stainless steel | |
| 6 | Piston ring | 2 | NBR | |
| 7 | Springs | 0-12 | spring steel | epoxy coating |
| 8 | Piston bearing | 2 | engineering plastic | |
| 9 | Piston ring | 2 | NBR | |
| 10 | Plug | 2 | NBR | |
| 11 | Thrust ring | 2 | engineering plastic | |
| 12 | Ring | 1 | engineering plastic | |
| 13 | Washer | 1 | stainless steel | |
| 14 | Spring clamp | 2 | stainless steel | |
| 15 | Indicator | 1 | plastic | |
| 16 | Indicator housing | 1 | plastic | |
| 17 | Bearing | 1 | engineering plastic | |
| 18 | Cam | 1 | steel | oxidation/galvanic zinc plating |
| 19 | Bearing | 1 | NBR | |
| 20 | Bearing | 1 | engineering plastic | |
| 21 | Bearing | 1 | engineering plastic | |
| 22 | Sealing ring | 2 | NBR | |
| 23 | Sealing ring | 2 | NBR | |
| 24 | Bearing | 2 | stainless steel | |
| 25 | Adjusting nut | 2 | stainless steel | |
| 26 | Adjustment screw | 2 | stainless steel | |
| 27 | Sleeve | 2 | aluminum |
Limit Switch Block DNOVA APL-410N EX
Technical parameters of the limit switch unit DNOVA APL-410N EX
| Name | Meaning |
| Limit switch block model | APL-410N EX |
| Enclosure protection rating, IP | 65 |
| Ambient temperature, °C | from -25 to 80 |
| Service life, years | 10 |
Sketch of the dimensions and sizes of the limit switch block DNOVA APL-410N EX
Dimensions and sizes of the limit switch unit DNOVA APL-410N EX:
| Model | D, mm | D1, mm | H, mm | L, mm | B, mm | M, mm |
| APL-410N EX | 9.5 | 5 | 174 | 177 | 178 | 8 |
Sketch of parts and materials of the limit switch block DNOVA APL-410N EX
Table of parts and materials of the limit switch block DNOVA APL-410N EX:
| Item No. | Detail | Material |
| 1 | Visual indicator | ABS plastic / polycarbonate |
| 2 | Visual indicator cover | polycarbonate |
| 3 | Label | |
| 4 | Cover screws | stainless steel |
| 5 | LSU housing cover | aluminum die casting |
| 6 | Shaft | stainless steel |
| 7 | Limit switches | |
| 8 | Cams (eccentrics) | polycarbonate |
| 9 | LSU case | aluminum die casting |
| 10 | Terminal block | |
| 11 | Ground terminal | stainless steel |
| 12 | Hole (thread) for cable entry | |
| 13 | bracket | stainless steel |
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.