The ball valve is used as a shut-off valve in heating, water supply, steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) not aggressive to valve materials.

DNOVA pneumatic double-acting rotary actuators PA-DA and pneumatic rotary actuators with return spring PA-SA are designed for automation of industrial valve control process with maximum torque up to 2128 Nm.

The pneumatic valve is used to change the direction, start and stop the compressed air flow in the pneumatic system depending on the external control action.

The HDM worm gear manual doubleturn actuator with reduction gearbox allows the manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.

The limit switch unit is designed for visual and electrical signalling of the end positions of the shut-off body of the pipeline valve.

Air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain pressure at the set level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system.

Technical parameters Ball valves DNOVA BV3232P(3pc)-FP-F-ISO-H , three-piece full bore flanged, stainless steel SS304, PTFE

Property	Value
Working Medium Temperature, °C	from -20 to 180
Application	Water supply, heating, Pneumatic systems
Working Medium	Water, steam, petroleum products, liquid medium, neutral media, gaseous media
Pipeline Connection	Flanged
Water Take-off	No
Flow Section Type	Full-bore
Control Type	Pneumatic actuator
Connection	Flanged
Control	Double-acting pneumatic actuator
End Switches Availability	Yes
Pneumatic Distributor Availability	Yes
Warranty (Years)	1
Manufacturer Country	China

Dimensions and dimensions Ball valves DNOVA BV3232P(3pc)-FP-F-ISO-H , three-piece full bore flanged, stainless steel SS304, PTFE

Sketch Ball Valves DNOVA BV3232P(3pc)-FP-F-ISO-H , three-piece full bore flanged, stainless steel SS304, PTFE

Parts and materials table Ball valves DNOVA BV3232P(3pc)-FP-F-ISO-H , three-piece full bore flanged, stainless steel SS304, PTFE

No.	Part	Material	Quantity
1	Body	Steel SS304 / SS316	1
2	Closure Ball	Steel S304 / S316	1
3	Bolt	Steel S201 / S304	4~6
4	Nut	Steel S201 / S304	6~12
5	Sealing	PTFE	1
6	Stem	Steel SS304 / SS316	1
7	Gland	Steel S201 / S304	1
8	Cover	Steel WCB/CF8/CF8M	2
9	Seat Rings	PTFE	2
10	Thrust Washer	PTFE	1

Parts and materials sketch Ball valves DNOVA BV3232P(3pc)-FP-F-ISO-H , three-piece full bore flanged, stainless steel SS304, PTFE

Technical parameters of pneumatic actuator DNOVA

Name	Value
Design	Double-acting
Working pressure, bar	6
Working medium	Filtered compressed air or non-aggressive gases, oils
Presence of manual override	Handwheel

Dimensions and dimensions of pneumatic actuator DNOVA

Model	DA-052	DA-065
G, mm	15	15
M, mm	80	80
N, mm	30	30
F0, mm	34	34
P, mm	20	20
B1, mm	153	174
C, mm	30	36
E, mm	72	89
J	4-M5x8	4-M6x10
K	4-M6x10	4-M8x12
F, mm	26	26
A1, mm	108	125
D, mm	41	46
L	11x11	14x14
H	F03	F05
I	F05	F07

Sketch of dimensions and dimensions of pneumatic actuator DNOVA

Parts and materials table for pneumatic actuator DNOVA

No.	Name	Quantity	Material	Coating
1	Housing	1	Extruded aluminum	Hard anodized
2	Side plugs	2	Cast aluminum
3	Gear	1	Stainless steel	Nickel-plated
4	Piston	2	Steel/aluminum	Oxidized / Galvanized coating
5	Plugs	8	Stainless steel
6	Piston ring	2	NBR
7	Springs	0-12	Spring steel	Epoxy coating
8	Piston bearing	2	Engineering plastic
9	Piston ring	2	NBR
10	Plug	2	NBR
11	Thrust ring	2	Engineering plastic
12	Ring	1	Engineering plastic
13	Washer	1	Stainless steel
14	Spring clamp	2	Stainless steel
15	Indicator	1	Plastic
16	Indicator housing	1	Plastic
17	Bearing	1	Engineering plastic
18	Cam	1	Steel	Oxidized / Galvanized coating
19	Bearing	1	NBR
20	Bearing	1	Engineering plastic
21	Bearing	1	Engineering plastic
22	Sealing ring	2	NBR
23	Sealing ring	2	NBR
24	Bearing	2	Stainless steel
25	Adjustment nut	2	Stainless steel
26	Adjustment screw	2	Stainless steel
27	Bushing	2	Aluminum

Sketch of parts and materials of pneumatic actuator DNOVA

Technical parameters of pneumatic valve DNOVA

Name	Value
Type of pneumatic distributor	Spool valve
Operating pressure, bar	1.5 ÷ 8
Supply voltage, V	220 V
Total power, VA	4.5
Control	Double-acting electromagnetic
Operating frequency, cycle/sec	5

Dimensions and dimensions of pneumatic valves DNOVA

Model	4V320-08
A, mm	71.9
B, mm	45
C, mm	94.4
D, mm	27
E, mm	69
F, mm	40
I, mm	24
K, mm	40
L, mm	188.8
M, mm	69.4
N, mm	50
O, mm	82.4
P, mm	24
S, mm	20
T, mm	6.5
U, mm	2.4
V, mm	4
H, mm	82.4

Technical parameters of the DNOVA handwheel switch

Name	Value
Climatic version	U, UHL, T, OM
Protection degree, IP	67
Type of connection	ISO 5211

Dimensions and dimensions of the handwheel DNOVA

Model	HDM-1
b1, mm	14
N, mm	22
b2, mm	14
M, mm	16
D1, mm	50
D2, mm	70
D3, mm	50
D4, mm	70
ØC, mm	88
C, mm	120
A, mm	90
F, mm	115
Y, mm	145
4-M1	4-M6
4-M2	4-M8
4-Ø1	4-Ø6.5
4-Ø2	4-Ø8.5
E, mm	70x70
B, mm	55
S, mm	53
K, mm	10
T, mm	145

Parts and materials table for the DNOVA handwheel

No.	Parts	Material
1	Shaft for pneumatic drive mount	Steel 45
2, 8	Sealing ring	EPDM
3	Retaining spring	Spring steel
4	Upper end cover	Aluminum alloy
5	Screw	Steel 304
6	Retaining clamp (main rod)	Steel 304
7	Housing	Aluminum alloy
9	Gearbox	Cast iron WCB50
10	Transition coupling	Cast iron WCB40
11	Gearbox shaft	Cast iron WCB40

Parts and material sketch of the DNOVA handwheel

Technical parameters of limit switch unit DNOVA

Name	Value
Maximum voltage of the limit switch, V	250
Enclosure protection rating, IP	67
Operating temperature range, °C	from -40 to +80
Service life, years	10

Dimensions and dimensions of limit switch unit DNOVA

Model	H	L	B	D	D1	M
APL-210N	77	112	88	10	5	20x1.5

Sketch of dimensions and dimensions of limit switch unit DNOVA

Technical parameters of DNOVA AFC2000 air treatment unit

Name	Value
Operating pressure, bar	8
Adjustable pressure range, bar	0.5 ÷ 9
Filtered particle size, μm	40 μm
Weight, kg	0.395

Dimensions and dimensions of DNOVA AFC2000 air treatment unit

Model	AFC2000
A, mm	162
B, mm	88
C, mm	139
D, mm	31
E, mm	53.5
F, mm	12
G, mm	8
H, mm	7
I, mm	13.3
J, mm	39
K, mm	5
L, mm	40
M, mm	32
N, mm	53
O, mm	29
P, mm	6
R, mm	41.5

The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.

To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.

Please feel free to reach out to us for any questions or further assistance regarding your order.