Description
Ball valve DNOVA model BV3232P(3pc)-FP-F-ISO-H PA-DA 4M310-08 APL-410N Ex MON AFC2000 is used as a shut-off valve in heating, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) not aggressive to valve materials.
Pneumatic rotary actuators Ball valves DNOVA BV3232P(3pc)-FP-F-H DN15-100 Ru40, three-piece full bore flanged, stainless steel SS316, PTFE, with pneumatic actuator PA-DA, with pan. distributor 4M310-08 24V, with APL-410N EX BCV, with MON1-250-T26-ISO handwheel, with AFC2000 ATU are designed for automation of control process of industrial shut-off valves - gates, ball valves. DNOVA pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
Pneumatic valves 4M310-08 are used for control in pneumatic systems having NAMUR docking surface for installation of valves through through holes in the housing.
The APL-410N EX limit switch unit is designed for visual and electrical signalling of end positions of the valve shut-off body. It is mounted from above on the surface of the pneumatic actuator and connected to the actuator shaft - DIN standard. The sealed box usually contains two sensors which monitor the position of the actuator shaft and signalise the end positions. The visual indication of the position can be observed on the unit's casing there is a 3D visual indicator RED-CLOSED and YELLOW-OPEN.
The AFC2000 air treatment unit is designed to clean compressed air from moisture and solid particles, remove condensate, automatically maintain the pressure at a preset level, supply lubricant from the tank into the compressed air flow to the pneumatic system elements with a large capacity range from 500 litres/minute to 10,000 litres/minute. The lubricator (oil atomiser) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic valves.
Technical characteristics of ball valves DNOVA BV3232P(3pc)-FP-F-ISO-H 16 bar, three-piece full bore flanged, stainless steel SS316, PTFE
| Parameter | Value |
|---|---|
| Nominal diameter DN, mm | 15-100 |
| Operating pressure PN, bar | DN15-50 – 40, DN65-80 – 25, DN100 – 16 |
| Operating temperature t, °C | From -20 to +180 |
| Operating medium | Water, steam, petroleum products, and other liquid or gaseous media neutral to the valve materials |
| Pipeline connection | Flanged |
| Type of passage section | Full passage |
| Ball valve tightness class | "A" |
| Control type | Manual (handwheel) |
| Additional info | Possible installation of an electric or pneumatic actuator (ISO 5211-2001) |
Ball valve component materials DNOVA BV3232P(3pc)-FP-F-ISO-H 16 bar, three-piece full bore flanged, stainless steel SS316, PTFE
| № | Name | Material | Quantity |
|---|---|---|---|
| 1 | Body | SS304/SS316 | 1 |
| 2 | Ball valve | SS304/SS316 | 1 |
| 3 | Bolt | SS201/SS304 | 4-6 |
| 4 | Nut | SS201/SS304 | 6-12 |
| 5 | Seal | PTFE | 1 |
| 6 | Stem | SS304/SS316 | 1 |
| 7 | Gland | SS201/SS304 | 1 |
| 8 | Cap | WCB/CF8/CF8M | 2 |
| 9 | Seat rings | PTFE | 2 |
| 10 | Thrust washer | PTFE | 1 |
| 11 | Nut | SS201/SS304 | 1 |
Ball valve material sketch DNOVA BV3232P(3pc)-FP-F-ISO-H 16 bar, three-piece full bore flanged, stainless steel SS316, PTFE
Technical data of pneumatic actuators PA-DA
| Parameter | Value |
|---|---|
| Construction | With return springs |
| Nominal pressure PN, bar | 12 |
| Operating pressure, bar | 2…8 |
| Working medium | Filtered compressed air or non-aggressive gases, oils |
| Maximum particle diameter | Less than 30 microns |
| Operating temperature t, °C | • From -20 to +80 °C |
| • From -40 to +80 °C (low temperature version) | |
| • From -20 to +160 °C (dry air) | |
| Adjustment range | ±5° for rotation at 0° and 90° |
| Manual duplication | Yes |
| Position indicator | Open/Closed |
| Operating environment | Indoors and outdoors. (All internal and external parts have corrosion-resistant coating) |
Materials of pneumatic actuator parts PA-DA
Here’s the translation:
| No. | Name | Material |
|---|---|---|
| 1 | Housing | Extruded aluminum |
| 2 | Side plugs | Cast aluminum |
| 3 | Gear | Stainless steel |
| 4 | Piston | Steel/aluminum |
| 5 | Plugs | Stainless steel |
| 6 | Piston ring | NBR |
| 7 | Springs | Spring steel |
| 8 | Piston bearing | Engineering plastic |
| 9 | Piston ring | NBR |
| 10 | Plug | NBR |
| 11 | Thrust ring | Engineering plastic |
| 12 | Ring | Engineering plastic |
| 13 | Washer | Stainless steel |
| 14 | Spring clip | Stainless steel |
| 15 | Indicator | Plastic |
| 16 | Indicator housing | Plastic |
| 17 | Bearing | Engineering plastic |
| 18 | Cam | Steel |
| 19 | Bearing | NBR |
| 20 | Bearing | Engineering plastic |
| 21 | Bearing | Engineering plastic |
| 22 | Sealing ring | NBR |
| 23 | Sealing ring | NBR |
| 24 | Bearing | Stainless steel |
| 25 | Adjustment nut | Stainless steel |
| 26 | Adjustment screw | Stainless steel |
| 27 | Bushing | Aluminum |
Material sketch of the pneumatic actuator PA-DA
Technical data of pneumatic valve 4M310-08 24V
| Parameter | Value |
|---|---|
| Type of valve construction | Spool-type |
| Nominal pressure PN, MPa (kg/cm²) | 1.2 (12) |
| Operating pressure, bar | 1.5…8 |
| Operating medium | Filtered compressed air |
| Ambient temperature t, °C | From +5 to +50 |
| Switching frequency | 5 cycles/sec |
| Manual duplication | Yes |
| Protection degree | IP 65 |
| Mounting | Through holes in the body |
| Housing material | Anodized aluminum |
| Response time | 0.05 sec |
Technical data of the AFC2000 air supply unit
| Parameter | Value |
|---|---|
| Operating pressure, bar | 8 |
| Maximum pressure, bar | 10 |
| Adjustable pressure range, bar | 0.5 ÷ 9 |
| Burst pressure, bar | 15 |
| Air connection | 1/4" |
| Operating temperature, °C | From -5 to +60 |
| Filtered particle size, µm | 40 |
| Oil viscosity | ISO VG 32 |
| Weight, kg | 0.395 |
Technical characteristics of limit switch unit APL-410N EX
Here is the translation:
| Parameter | Value |
|---|---|
| Enclosure | All-weather IP65, explosion-proof Exd IIB T6 |
| Cable entries | 2 x NPT1/2” |
| Terminal block | 8 points (0.05 – 2.5) mm² |
| Position indicator | 0 - 90° (free rotation 90°) CLOSED - red; OPEN - yellow |
| Switches/sensors | Two mechanical switches, two proximity sensors |
| Rated voltage, V | 250 |
| Allowable ambient temperature, °C | From -25 to +80 |
| Service life, years | 10 |
Materials of limit switch unit APL-410N EX
| Name | Materials |
|---|---|
| Cover and body | Pressure cast aluminum |
| Shaft | Stainless steel |
| Indicator cover | Polycarbonate |
| Cam | Polycarbonate |
| Spring | Stainless steel |
| Cover bolts | Stainless steel |
| Sealing ring | NBR |
| Bushing | Bronze |
| Sealing ring (shaft) | Stainless steel |
| Grounding terminal | Stainless steel |
| Indicator | ABS plastic / polycarbonate |
| Bracket | Stainless steel |
Materials of the handwheel DNOVA HDM
| № | Name | Material |
|---|---|---|
| 1 | Shaft for pneumatic actuator mounting | Steel 45 |
| 2 | Sealing ring | EPDM |
| 3 | Retaining spring | Spring steel |
| 4 | Upper end cap | Aluminum alloy |
| 5 | Screw | Steel 304 |
| 6 | Retaining bracket (main link) | Steel 304 |
| 7 | Body | Aluminum alloy |
| 8 | Sealing ring | EPDM |
| 9 | Gear reducer | Cast iron |
| 10 | Adapter coupling | Cast iron |
| 11 | Reducer shaft | Cast iron |
Materials of the DNOVA MON handwheel
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.