Description
Ball valves are used as shut-off valves in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve. The use of ball valves as regulating valves is not allowed.
Pneumatic DNOVA double-acting pneumatic actuators PADA are designed to automate the process of controlling industrial valves with maximum torque up to 2128 Nm.
Manual doubler with worm gear and reduction reducer allows to manually set the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual doubler is designed to provide the most effective and efficient solution to the full range of manual override applications.
Technical parameters of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R DN200-250 16 bar full bore flanged, body - stainless steel 316, with double-acting PA-DA pneumatic actuator and MON-ISO reducer:
|
Parameter |
Value |
|
Nominal pressure PN, bar |
16 |
|
Working medium temperature, °C |
From -29 to 150 |
|
Type of valve device |
Two-way |
|
Application |
Water supply, heat supply, industry |
|
Working medium |
Water, air, neutral media |
|
Connection to pipeline |
Flanged |
|
Type of flow cross-section |
Full-bore |
|
Tightness class |
A |
|
Type of control |
With pneumatic actuator |
|
Connection |
Flanged |
|
Control |
Double-acting pneumatic actuator |
|
Presence of limit switches |
No |
|
Presence of pneumatic distributor |
No |
|
Presence of electro-pneumatic positioner |
No |
|
Average service life, years |
10 |
|
Warranty, years |
1 |
|
Country of manufacture |
China |
Dimensions and sizes of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R DN200-250 16 bar full bore flanged, body - stainless steel 316, with double-acting PA-DA pneumatic actuator and MON-ISO reducer:
| Model | DN, mm | L, mm | H, mm | ØD, mm | ØD1, mm | ØD2, mm | A, mm | E, mm | H1, mm |
| DN200 | 200 | 400 | 180 | 340 | 295 | 268 | 405 | 174 | 195 |
| DN250 | 250 | 450 | 296 | 405 | 355 | 320 | 465 | 199 | 195 |
Table of parts and materials of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R DN200-250 16 bar full bore flanged, body - stainless steel 316, with double-acting PA-DA pneumatic actuator and MON-ISO reducer:
|
№ |
Part name |
Material |
|
1 |
Body |
Stainless steel 316 |
|
2 |
Gasket |
Stainless steel 316 + graphite |
|
3 |
Cover |
Stainless steel 316 |
|
4 |
Nut |
Stainless steel ASTM A193 Gr.B8M Cl2 |
|
5 |
Bolt |
Stainless steel ASTM A193 Gr.B8M Cl2 |
|
6 |
Ball seal |
PTFE |
|
7 |
Ball |
Stainless steel 316 |
|
8 |
Stem |
Stainless steel 316 |
|
9 |
Thrust washer |
PTFE |
|
10 |
Stem seal |
PTFE |
|
11 |
Gland packing |
Stainless steel 316 |
|
12 |
Bolt |
Stainless steel ASTM A193 Gr.B8M Cl2 |
|
13 |
Support frame |
Stainless steel 304 |
|
14 |
Gasket |
Stainless steel 304 |
|
15 |
Stud |
Stainless steel ASTM A193 Gr.B8M Cl2 |
|
16 |
Nut |
Stainless steel ASTM A193 Gr.B8M Cl2 |
|
17 |
Cushioning gasket |
Stainless steel |
|
18 |
Stud |
Stainless steel ASTM A193 Gr.B8M Cl2 |
|
19 |
Nut |
Stainless steel ASTM A193 Gr.B8M Cl2 |
|
20 |
Gear transmission |
Steel 45 |
|
22 |
Screw |
Stainless steel ASTM A193 Gr.B8M Cl2 |
Technical parameters of pneumatic actuator DNOVA
|
Name |
Value |
|
Construction |
Double-acting |
|
Control pressure, bar |
2 ÷ 8 |
|
Control pressure, bar |
No |
Dimensions and sizes of pneumatic actuator DNOVA:
| Actuator model | DA-140 | DA-160 |
| G, mm | 25 | 30 |
| M, mm | 80 | 130 |
| N, mm | 30 | 30 |
| F0, mm | 62 | 62 |
| P, mm | 30 | 30 |
| B1, mm | 308 | 465 |
| C, mm | 67.5 | 87.5 |
| E, mm | 157 | 199 |
| J | 4-M8x12 | 4-M10x16 |
| K | 4-M10x16 | 4-M12x20 |
| F, mm | 36 | 38 |
| A1, mm | 210 | 310 |
| D, mm | 70 | 87.5 |
| H | F10 | F10 |
| I | F12 | F12 |
| L | 22x22 | 27x27 |
Parts and materials table for the pneumatic actuator DNOVA:
|
№ |
Name |
Quantity |
Material |
Coating |
|
1 |
Body |
1 |
Extruded aluminum |
Hard anodized |
|
2 |
Side plugs |
2 |
Cast aluminum |
- |
|
3 |
Gear |
1 |
Stainless steel |
Nickel-plated |
|
4 |
Piston |
2 |
Steel/Aluminum |
Oxidation/galvanized |
|
5 |
Plugs |
8 |
Stainless steel |
- |
|
6 |
Piston ring |
2 |
NBR |
- |
|
7 |
Springs |
0–12 |
Spring steel |
Epoxy coating |
|
8 |
Piston bearing |
2 |
Engineering plastic |
- |
|
9 |
Piston ring |
2 |
NBR |
- |
|
10 |
Plug |
2 |
NBR |
- |
|
11 |
Thrust ring |
2 |
Engineering plastic |
- |
|
12 |
Ring |
1 |
Engineering plastic |
- |
|
13 |
Washer |
1 |
Stainless steel |
- |
|
14 |
Spring clip |
2 |
Stainless steel |
- |
|
15 |
Indicator |
1 |
Plastic |
- |
|
16 |
Indicator body |
1 |
Plastic |
- |
|
17 |
Bearing |
1 |
Engineering plastic |
- |
|
18 |
Cam |
1 |
Steel |
Oxidation/ galvanized steel |
|
19 |
Bearing |
1 |
NBR |
- |
|
20 |
Bearing |
1 |
Engineering plastic |
- |
|
21 |
Bearing |
1 |
Engineering plastic |
- |
|
22 |
Sealing ring |
2 |
NBR |
- |
|
23 |
Sealing ring |
2 |
NBR |
- |
|
24 |
Bearing |
2 |
Stainless steel |
- |
|
25 |
Adjustment nut |
2 |
Stainless steel |
- |
|
26 |
Adjustment screw |
2 |
Stainless steel |
- |
|
27 |
Bushing |
2 |
Aluminum |
- |
Technical parameters of manual doubler DNOVA MON-ISO
|
Parameter |
Value |
|
Manual doubler model |
MON-ISO |
|
Mounting method |
Horizontal/Vertical |
|
Protection rating, IP |
67 |
|
Type of connection |
ISO 5211 |
Dimensions and sizes of manual doubler DNOVA MON-ISO:
| Model | MON4-1200-T54-ISO |
| b1, mm | 27 |
| N, mm | 32 |
| b2, mm | 27 |
| M, mm | 30 |
| D1, mm | Ø102 |
| 4-M1, mm | 4-M10 |
| D2, mm | Ø125 |
| 4-M2, mm | 4-M12 |
| E, mm | 129x129 |
| D3, mm | Ø125 |
| 4-Ø1, mm | 4-Ø12.5 |
| D4, mm | Ø140 |
| 4-Ø2, mm | 4-Ø16.5 |
| A, mm | 188.5 |
| B, mm | 93 |
| ØC, mm | Ø174 |
| F, mm | 202 |
| T, mm | 94 |
| Y, mm | 280 |
| H, mm | 195 |
| S, mm | 84 |
| K, mm | 15 |
| Ø handwheel, mm | 320 |
Parts and materials table for manual doubler DNOVA MON:
|
№ |
Name |
Material |
|
1 |
Stem for pneumatic actuator mounting |
Steel |
|
2 |
Sealing ring |
EPDM |
|
3 |
Locking spring |
Spring steel |
|
4 |
Upper end cover |
Aluminum alloy |
|
5 |
Screw |
Steel 304 |
|
6 |
Locking bracket (main link) |
Steel 304 |
|
7 |
Body |
Aluminum alloy |
|
8 |
Sealing ring |
EPDM |
|
9 |
Gearbox |
Cast iron BCh50 |
|
10 |
Transition coupling |
Cast iron BCh40 |
|
11 |
Gearbox stem |
Cast iron BCh40 |
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.