Description
The WBV1632E-2W-Fb butterfly valve is designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries. Operating principle: The valves are opened and closed by turning the disk by 90°. Opening is performed by turning the handle counterclockwise, closing - clockwise.
PA-DA pneumatic actuators are designed for automation of control process of industrial shut-off valves - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
Pneumatic actuators 4m310-08 220 V are used for control in pneumatic systems having NAMUR docking surface, for installation of actuators through through holes in the body.
The AFC2000 air treatment unit is designed to clean compressed air from dripping moisture and solid particles, remove condensate, automatically maintain the pressure at a set level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system with a large capacity range from 500 liters/minute to 10,000 liters/minute. The lubricator adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components such as pneumatic cylinders and pneumatic valves.
Technical parameters of Water Butterfly Valve DNOVA WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, 4M310-08 220V, ATU AFC2000:
| Nominal diameter DN, mm | 40 - 300 |
| Nominal pressure PN, bar | 16 |
| Working medium temperature t, ⁰C | -20 to +110 |
| Working medium | water, steam, aggressive media and liquids with abrasive content (cement, sand, alumina, etc.) |
| Flow direction | double-sided |
| Control type | DN40-200 - handle |
| DN250-300 - reducer | |
| Pipeline connection | interflanged |
| Body material | cast iron QT450 |
| Sealing material | EPDM with wear resistant coating |
| Service life, years | 10 |
Butterfly valves WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, 4M310-08 220V, ATU AFC2000
Dimensions and dimensions of butterfly valves DNOVA WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, 4M310-08 220V, ATU AFC2000:
| DN | L, mm | H, mm | H1, mm | D2, mm | D1, mm | n-d, mm |
| 40 | 43 | 147 | 70 | 92 | 125 | 4- Ø23 |
| 50 | 43 | 147 | 70 | 92 | 125 | 4- Ø23 |
| 65 | 46 | 155 | 76 | 110 | 145 | 4- Ø23 |
| 80 | 46 | 164 | 92 | 121 | 160 | 8- Ø20 |
| 100 | 52 | 175 | 106 | 153 | 180 | 4- Ø23 |
| 125 | 56 | 194 | 119 | 176 | 210 | 4- Ø23 |
| 150 | 56 | 206 | 132 | 207 | 240 | 4- Ø25 |
| 200 | 60 | 237 | 162 | 259 | 295 | 4- Ø25 |
| 250 | 68 | 282 | 200 | 316 | 355 | 4-Ø28 |
| 300 | 78 | 311 | 225 | 370 | 410 | 4-Ø28 |
Sketch Butterfly valves WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, 4M310-08 220V, ATU AFC2000
Materials of butterfly valves DNOVA WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, 4M310-08 220V, ATU AFC2000:
| № | Part name | Material |
| 1 | Body | cast iron QT450 |
| 2 | Disk | 316L stainless steel |
| 3 | Seat seal | EPDM+ wear resistant material (siliclone+graphite) |
| 4 | Stem | 2Cr13 steel |
Sketch of parts and materials Butterfly valves WBV1632E-2W-Fb-H, body material - cast iron QT450, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA, 4M310-08 220V, ATU AFC2000
Technical data of PA-DA pneumatic actuators:
| Design | Double action |
| Nominal pressure PN, bar | 12 |
| Working pressure, bar | 2...8 |
| Working medium | Filtered compressed air or non-aggressive gases, oils |
| Maximum particle diameter | less than 30 µm2 |
| Operating temperature t, ⁰C | - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air) |
| Adjustment range | ± 5 ° for rotation at 0 ° and 90 ° |
| Manual override | is |
| Position indicator | open/closed |
| Operating environment | indoors and outdoors. (All internal and external parts are anti-corrosion coated) |
PA-DA pneumatic actuator
PA-DA pneumatic actuator component materials:
| № | Name | Material |
| 1 | Enclosure | extruded aluminum |
| 2 | Side plugs | cast aluminum |
| 3 | Gear | stainless steel |
| 4 | Piston | steel/aluminum |
| 5 | Plugs | stainless steel |
| 6 | Piston ring | NBR |
| 7 | Springs | spring steel |
| 8 | Piston bearing | engineering plastic |
| 9 | Piston ring | NBR |
| 10 | Plug | NBR |
| 11 | Thrust ring | engineering plastic |
| 12 | Ring | engineering plastic |
| 13 | Washer | stainless steel |
| 14 | Spring clip | stainless steel |
| 15 | Indicator | plastic |
| 16 | Indicator housing | plastic |
| 17 | Bearing | engineering plastic |
| 18 | Cam | steel |
| 19 | Bearing | NBR |
| 20 | Bearing | engineering plastic |
| 21 | Bearing | engineering plastic |
| 22 | Sealing ring | NBR |
| 23 | Sealing ring | NBR |
| 24 | Bearing | stainless steel |
| 25 | Adjustment nut | stainless steel |
| 26 | Adjustment screw | stainless steel |
| 27 | Sleeve | aluminum |
Parts and material sketch of the PA-DA pneumatic actuator
Technical characteristics of the pneumatic valve 4m310-08 220V:
| Design | spool type |
| Nominal pressure PN, MPa (kg/cm2) | 1,2 (12) |
| Working pressure, bar | 1,5...8 |
| Working medium | filtered compressed air |
| Ambient temperature t, ⁰C | +5 to +50 |
| Response frequency | 5 cycles/s |
| Manual duplication | is |
| Degree of protection | IP 65 |
| Mounting | through holes in the housing |
| Enclosure material | anodized aluminum |
| Response time | 0.05 sec. |
Main parameters of the AFC2000 air treatment unit:
| Operating pressure, bar | 8 |
| Maximum pressure, bar | 10 |
| Adjustable pressure range, bar | 0,5 ÷ 9 |
| Breaking pressure, bar | 15 |
| Air connection | 1/4” |
| Operating temperature, C | -5 to +60 |
| Filter particle size, µm | 40 |
| Oil viscosity | ISO VG 32 |
| Weight, kg | 0,395 |
| Set composition | filter-moisture separator, pressure regulator, lubricator, bracket |
Air treatment unit AFC2000
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.