How it works
Spring-return rotary actuator
Butterfly disc
Limit-switch box
The number that matters
Nominal pressure
16bar
The pressure class of the valve body at 20 °C. Working limits depend on the medium and its temperature.
Construction
Parts and materials
Butterfly valve WBV1432E-2W-Fb PA-SA APL-510N-EX is designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
SA pneumatic actuators are designed for automation of industrial shut-off valves control process - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
APL-510N-EX limit switch unit is an electrotechnical device designed to open and close the working circuit and to visualize the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of fault detection.
Technical parameters of DNOVA WBV1432E-2W-Fb-H water disc gate valves, body material - cast iron GGG50, disc material - stainless steel AISI 316L, sealing - EPDM, with pneumatic actuator with return springs PA-SA, LSU APL-510N-EX:
| Nominal diameter DN, mm | 40 - 150 |
| Working pressure PN, bar | 16 |
| Working medium temperature t, °C | -20 to +90 |
| Working medium | water, mineral oils, hydrocarbons, oils, fats |
| Flow direction | double-sided |
| Connection to pipeline | interflanged |
| Body material | cast iron GGG50 |
Gate WBV1432E-2W-Fb PA-SA APL-510N-EX
Dimensions and dimensions of DNOVA WBV1432E-2W-Fb-H water disc gate valves, body material - cast iron GGG50, disc material - stainless steel AISI 316L, sealing - EPDM, pneumatically operated with return springs PA-SA, LSU APL-510N-EX:
| DN | A, mm | B, mm | C, mm | E, mm | G, mm | L, mm | M, mm |
| 40 | 335.4 | 55 | 109 | 153 | 101 | 33 | 121.4 |
| 50 | 391.4 | 80 | 109 | 153 | 101 | 43 | 121.4 |
| 65 | 430.4 | 89 | 134 | 279 | 119 | 45 | 121.4 |
| 80 | 436.4 | 95 | 134 | 279 | 119 | 45 | 121.4 |
| 100 | 455.4 | 114 | 134 | 279 | 119 | 52 | 121.4 |
| 125 | 491.4 | 127 | 157 | 308 | 137.5 | 55 | 121.4 |
| 150 | 504.4 | 139 | 157 | 308 | 137.5 | 55 | 121.4 |
| 200 | 580.4 | 175 | 199 | 465 | 175 | 60 | 121.4 |
| 250 | 670.4 | 203 | 257 | 542 | 226 | 68 | 121.4 |
| 300 | 715.4 | 242 | 257 | 542 | 226 | 78 | 121.4 |
Sketch of gate WBV1432E-2W-Fb PA-SA APL-510N-EX
Materials DNOVA WBV1432E-2W-Fb-H water disc gate valve, body material - cast iron GGG50, disc material - stainless steel AISI 316L, seal - EPDM, pneumatically actuated with return springs PA-SA, LSU APL-510N-EX:
| № | Name | Material |
| 1 | Body | Cast iron GGG50 |
| 2 | Disk | 316L steel |
| 3 | Seat seal | EPDM |
| 4 | Upper stem | 316L steel |
| 5 | Lower stem | 316L steel |
| 6, 11 | Retaining ring | AISI 201 steel |
| 7 | Duster | NBR |
| 8 | Stem gasket | NBR |
| 9 | Shaft gasket | AISI 201 steel |
| 10 | Plug | plastic |
Sketch of detailing of gate WBV1432E-2W-Fb PA-SA APL-510N-EX
Technical data of SA pneumatic actuators
| Design | with return springs |
| Nominal pressure PN, bar | 12 |
| Working pressure, bar | 2...8 |
| Working medium | Filtered compressed air or non-aggressive gases, oils |
| Maximum particle diameter | less than 30 µm2 |
| Operating temperature t, °C | - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air) |
| Adjustment range | ± 5 ° for rotation at 0 ° and 90 ° |
| Manual override | is |
| Position indicator | open/closed |
| Operating environment | indoors and outdoors. (All internal and external parts are anti-corrosion coated) |
Materials of SA pneumatic actuator parts:
| № | Name | Material |
| 1 | Enclosure | extruded aluminum |
| 2 | Side plugs | cast aluminum |
| 3 | Gear | stainless steel |
| 4 | Piston | steel/aluminum |
| 5 | Plugs | stainless steel |
| 6 | Piston ring | NBR |
| 7 | Springs | spring steel |
| 8 | Piston bearing | engineering plastic |
| 9 | Piston ring | NBR |
| 10 | Plug | NBR |
| 11 | Thrust ring | engineering plastic |
| 12 | Ring | engineering plastic |
| 13 | Washer | stainless steel |
| 14 | Spring clip | stainless steel |
| 15 | Indicator | plastic |
| 16 | Indicator housing | plastic |
| 17 | Bearing | engineering plastic |
| 18 | Cam | steel |
| 19 | Bearing | NBR |
| 20 | Bearing | engineering plastic |
| 21 | Bearing | engineering plastic |
| 22 | Sealing ring | NBR |
| 23 | Sealing ring | NBR |
| 24 | Bearing | stainless steel |
| 25 | Adjustment nut | stainless steel |
| 26 | Adjustment screw | stainless steel |
| 27 | Sleeve | aluminum |
Material sketch of SA pneumatic actuator
Characteristics of limit switch unit APL-510N-EX:
| Parameter | Significance |
| Enclosure | all-weather IP67/ NEMA4 4X,7,9 explosion-proof E EX d IIC T6 |
| Compatible devices | quarter-turn pneumatic actuators; - any actuators with shaft rotation by 90 |
| Full rotation angle | 90° |
| Cable glands | 2 x NPT 3/4” |
| Electrical connection | screw terminals 8 points (0.08 - 2.5) mm2 |
| Cable gland thread | 2 x NPT 3/4” |
| Type of visual indicator | two-color hemisphere: OPEN (Open) - yellow CLOSED (Closed) - red |
| Switches/sensors | two mechanical switches two proximity sensors |
| Rated voltage, V | 250 |
| Rated current, A | 16 |
| Permissible ambient temperature, °C | -20 to +66 |
| Average life, cycles | 10 000 000 |
| Weight, kg | 1.8 |
Wiring diagram of limit switch unit APL-510N-EX
- Body material
- Cast iron GGG50
- Maximum allowable temperature
- 120 °C
- Connection type
- Compact flanged
- Control type
- Pneumatic actuator
- Nominal pressure
- 16 bar
- Type of seal
- EPDM
- Disc material
- Stainless steel AISI 316L
- Explosion-proof
- Yes
- Torque
- 20 Nm
- Manual override
- No
- Limit switches
- Yes
- Feedback sensor
- Limit switches
- Type of pneumatic actuator
- with return springs
- Angle of rotation
- 90°
- Country of origin
- China
Production. Usually 7–14 business days after you approve the quotation and pay. Made-to-specification items are confirmed in the quotation.
Freight. Not charged at checkout. A manager quotes air and sea freight to your port or airport, and nothing ships until you approve the price and the freight.
To North America. From approval and payment to the destination port or airport: air 14–24 days, sea 32–60 days. Estimates, not guarantees.
Terms. EXW Ningbo or FOB Ningbo Port; CIF on request. The agreed term is written on the Proforma Invoice.
Total items
Product subtotal