How it works
Spring-return rotary actuator
Butterfly disc
5/2 double-solenoid pilot
Limit-switch box
The number that matters
Max. medium temperature
120°C
The highest medium temperature this valve is rated for.
Construction
Parts and materials
Butterfly valves DNOVA WBV3232E-2W-Fb-H are intended for use as shut-off or control valves for flow control in heat supply systems, water supply, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
Pneumatic distributor DNOVA 4V320-10 220V is used to change the direction, start, stop the flow of compressed air in the pneumatic system depending on the external control action.
The DNOVA APL-210N limit switch unit is an electrical device designed to open and close the working circuit and to visualize the positions of the shut-off element of pipeline valves. As a rule, a sealed box contains two mechanical switches rated for up to 250 V, which monitor the position of the actuator rod and signal in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color hemisphere of the visual indicator. If the connected pipeline valve is closed, then only the red part of the hemisphere with the inscription CLOSED is visible; if open, only the yellow part with the inscription OPEN. This visual indicator is clearly visible from afar, which simplifies the inspection of the equipment, and the color difference between the open and closed positions reduces the likelihood of erroneous perception of information. Thanks to the use of the LSU, it becomes possible to transmit information about the position of pipeline valves (open/closed) to automated control systems, which increases the reliability of the system as a whole and simplifies diagnostics when faults are detected.
The AFC2000 air preparation unit is designed to clean compressed air from droplet moisture and solid particles, remove condensate, automatically maintain the pressure at a given level, supply lubricant from the tank to the compressed air flow to the pneumatic system elements with a large range of throughput from 500 liters/minute to 10,000 liters/minute. The lubricator (oil sprayer) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic distributors.
Technical parameters of DNOVA WBV3232E-2W-Fb-H PN16 butterfly valves, 4V320-10 220V pneumatic distributor, APL-210N LSU, AFC2000 ATU:
| Name | Meaning |
| Nominal pressure PN, bar | 16 |
| Working environment temperature, °C | from -20 to 120 |
| Application | ventilation and stationary air conditioning, water supply, heat supply |
| Connection to the pipeline | interflange |
| Shutter type | rotary disc |
| Control type | pneumatic drive |
Sketch of DNOVA WBV3232E-2W-Fb-H butterfly valves with , pneumatic distributor 4V320-10 220V, LSU APL-210N, ATU AFC2000
Dimensions and sizes of DNOVA WBV3232E-2W-Fb-H butterfly valves with , pneumatic distributor 4V320-10 220V, LSU APL-210N, ATU AFC2000:
| DN, mm | L, mm | D, mm | H, mm | F, mm | L1, mm | G, mm | X, mm | Y, mm |
| 40 | 33 | 71 | 166 | 135 | 216 | 77 | 88 | 162 |
| 50 | 45 | 73 | 238 | 135 | 216 | 77 | 88 | 162 |
| 65 | 48 | 85 | 264 | 160 | 279 | 77 | 88 | 162 |
| 80 | 49 | 100 | 276 | 160 | 279 | 77 | 88 | 162 |
| 100 | 55 | 131 | 314 | 160 | 279 | 77 | 88 | 162 |
| 125 | 58 | 155 | 340 | 193 | 308 | 77 | 88 | 162 |
| 150 | 59 | 184 | 365 | 193 | 308 | 77 | 88 | 162 |
| 200 | 64 | 234 | 437 | 237 | 465 | 77 | 88 | 162 |
| 250 | 70 | 288 | 495 | 295 | 542 | 77 | 88 | 162 |
| 300 | 80 | 340 | 579 | 295 | 542 | 77 | 88 | 162 |
Sketch of parts and materials of butterfly valves DNOVA WBV3232E-2W-Fb-H
Table of parts and materials of DNOVA WBV3232E-2W-Fb-H butterfly valves:
| No. | Name | Material |
| 1 | Frame | Stainless steel AISI316L (03x17H14M3) |
| 2 | Cuff | EPDM |
| 3, 4, 5 | Disc, Rod, Stud | Steel AISI316L (03x17H14M3) |
| 6 | Sleeve | PTFE |
| 7 | Sealing ring | Nitrile NBR |
| 8 | Plate | Carbon steel |
Technical parameters of the pneumatic distributor DNOVA 4V320-10 220V
| Name | Meaning |
| Type of pneumatic distributor | spool valve |
| Model of pneumatic distributor | 4V320-10 220V |
| Working pressure, bar | 1.5 ÷ 8 |
| Supply voltage, V | 220 V |
| Response frequency, cycles/sec | 5 |
Limit Switch Block DNOVA APL-210N
Technical parameters of the limit switch unit DNOVA APL-210N
| Name | Meaning |
| Limit switch block model | APL-210N |
| Service life, years | 10 |
Table of parts and materials of the limit switch block DNOVA APL-210N:
| No. | Name | Material |
| 1 | Frame | cast aluminum |
| 2 | Indicator cap | polyester plastic |
| 3 | 3D indicator | ABC plastic |
| 4 | Cam | polyester plastic |
| 5 | Spring | stainless steel |
| 6 | Screws | stainless steel |
| 7 | Sealing rings | NBR |
| 8 | Sleeve | bronze |
| 9 | Ground terminal | stainless steel |
| 10 | Shaft | stainless steel |
Main parameters of the air preparation unit DNOVA AFC2000
| Working pressure, bar | 8 |
| Maximum pressure, bar | 10 |
| Adjustable pressure range, bar | 0.5 ÷ 9 |
| Destruction pressure, bar | 15 |
| Air connection | 1/4" |
| Operating temperature, C | from -5 to +60 |
| Size of filtered particles, µm | 40 |
| Oil viscosity | ISO VG 32 |
| Weight, kg | 0.395 |
| Kit composition | filter-moisture separator, pressure regulator, lubricator, bracket |
- Body material
- Stainless steel AISI 316L
- Maximum allowable temperature
- 120 °C
- Connection type
- Compact flanged
- Control type
- Pneumatic actuator
- Type of seal
- EPDM
- Coating type
- stainless steel
- Disc material
- Stainless steel AISI 316L
- Explosion-proof
- No
- Limit switches
- Yes
- Type of pneumatic actuator
- with return springs
- Angle of rotation
- 90°
- Country of origin
- China
Production. Usually 7–14 business days after you approve the quotation and pay. Made-to-specification items are confirmed in the quotation.
Freight. Not charged at checkout. A manager quotes air and sea freight to your port or airport, and nothing ships until you approve the price and the freight.
To North America. From approval and payment to the destination port or airport: air 14–24 days, sea 32–60 days. Estimates, not guarantees.
Terms. EXW Ningbo or FOB Ningbo Port; CIF on request. The agreed term is written on the Proforma Invoice.
Total items
Product subtotal