• Ball valves DNOVA BV3232P(4pc)-FP-3WL-F-ISO-H 16 bar full bore, flanged, body - stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with pneumatic drive DNOVA PA-SA with return springs and pneumatic positioner YT-1000RSN without rev
1 1

Parts

3-way ball valve BV3232P(4pc)-FP-3WL-F-ISO-H with pneumatic spring-return actuator

Spring-return · YT-1000RSN positioner · DN15–100 · flanged · full bore · AISI 316 body · PTFE seal · drive rev

Model BV3232P(4pc)-FP-3WL-F-ISO-H SKU D160-44071
$152.16 USD
$152.16 USD
Sale Sold out
Taxes included. Freight is quoted by our manager after you order; nothing ships until you approve it.
Request a quote
View full details

How it works

Spring-return rotary actuator

Spring-return rotary actuator: Air supplied
Air suppliedAir turns the shaft against the springs.
Spring-return rotary actuator: Air removed
Air removedThe springs return the shaft to its rest position.

Three-way L-port ball

Three-way L-port ball: Position 1
Position 1The common port connects to one side outlet.
Three-way L-port ball: Position 2
Position 2The common port connects to the other side outlet.

Rotary positioner

Rotary positioner: Signal low
Signal lowThe drive holds one end position.
Rotary positioner: Signal mid
Signal midSignal and mechanical feedback set an intermediate position.
Rotary positioner: Signal high
Signal highThe drive holds the other end position.

The number that matters

Max. medium temperature

180°C

The highest medium temperature this valve is rated for.

Applications

Media and industries

  • Water
  • Steam
  • Petroleum Products
  • Neutral Media
  • Gaseous Media

The ball valve is used as a shut-off valve, as well as for mixing and separating the working medium flows in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the valve materials.

Pneumatic actuators DNOVA double-acting rotary PA-SA are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.

Electro-pneumatic rotary positioner is used to control rotary type pneumatic actuators by means of electric controller or control system with analog DC output signal in the range of 4 to 20 mA.

Technical parameters of ball valves DNOVA BV3232P(4pc)-FP-3WL-F DN15-100 PN16 full bore, flanged, stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with pneumatic actuator DNOVA PA-SA with return springs and pneumatic positioner YT-1000RSN without feedback:

Name Meaning
Nominal pressure PN, bar 16
Working environment temperature, °C from -25 to 180
Type of crane device three-way
Three-way valve type L
Application water supply, heat supply
Working environment water, steam, petroleum products, neutral media, gaseous media
Connection to the pipeline flanged
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining flanged
Control pneumatic actuator with return springs
Availability of limit switches No
Availability of pneumatic distributor No
Availability of electropneumatic positioner There is
Average service life, years 10

Sketch of overall dimensions and sizes of ball valves DNOVA BV3232P(4pc)-FP-3WL-F DN15-100 PN16 full bore, flanged, stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with pneumatic actuator DNOVA PA-SA with return springs and pneumatic positioner YT-1000RSN without feedback

Dimensions and sizes of ball valves DNOVA BV3232P(4pc)-FP-3WL-F DN15-100 PN16 full bore, flanged, stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with pneumatic actuator DNOVA PA-SA with return springs and pneumatic positioner YT-1000RSN without feedback:

Size L, mm ØD, mm ØD1, mm ØD2, mm A, mm E, mm I, mm B, mm
DN15 150 95 65 45 153 72 62.5 117.5
DN20 160 105 75 58 174 89 62.5 117.5
DN25 180 115 85 64 216 109 62.5 117.5
DN32 200 140 100 78 216 109 62.5 117.5
DN40 220 150 110 88 279 134 62.5 117.5
DN50 240 165 125 99 279 134 62.5 117.5
DN65 260 185 145 122 279 134 62.5 117.5
DN80 280 200 160 138 405 174 62.5 117.5
DN100 325 220 180 158 405 174 62.5 117.5

Sketch of parts and materials of ball valves DNOVA BV3232P(4pc)-FP-3WL-F DN15-100 PN16 full bore, flanged, stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with pneumatic actuator DNOVA PA-SA with return springs and pneumatic positioner YT-1000RSN without feedback

Table of parts and materials of ball valves DNOVA BV3232P(4pc)-FP-3WL-F DN15-100 PN16 full bore, flanged, stainless steel SS316, ISO flange F03/F04-F10/F12, square 9x9-19x19, with pneumatic actuator DNOVA PA-SA with return springs and pneumatic positioner YT-1000RSN without feedback:

Item No. Part name Material
1 Frame Stainless steel SS316
2 Ball Stainless steel SS316
3 Sealing PTFE
4 Case cover Stainless steel SS316
5 Bolt Stainless steel SS304
6 Pad PTFE
7 screw Stainless steel SS304
8 Pad PTFE
9 Rod seal PTFE
10 Bolt Stainless steel SS304
11 Seal Stainless steel SS304

Technical parameters of pneumatic drives DNOVA

Name Meaning
Design with return springs
Control pressure, bar 2 ÷ 8
Availability of manual backup No

Sketch of dimensions and sizes of pneumatic actuators DNOVA

Dimensions and sizes of pneumatic actuators DNOVA

Drive model SA-052 SA-065 SA-083 SA-105 SA-140
G, mm 15 15 15 25 30
Mmm 80 80 80 80 130
N, mm 30 30 30 30 30
F0, mm 34 34 34 41 62
R, mm 20 20 20 20 30
B1, mm 153 174 216 279 405
C, mm 30 36 46 55 76
E, mm 72 89 109 134 174
J 4-M5x8 4-M6x10 4-M6x10 4-M8x12 4-M10x16
TO 4-M6x10 4-M8x12 4-M8x12 4-M10x16 4-M12x20
F, mm 26 26 26 26 36
A1, mm 108 125 152 189 268
D, mm 41 46 55 64 77
H F03 F05 F05 F07 F10
I F05 F07 F07 F10 F12
L 11x11 14x14 17x17 22x22 27x27

Table of parts and materials of pneumatic drives DNOVA

No. Name Quantity Material Coating
1 Frame 1 extruded aluminum hard anodized
2 Side plugs 2 cast aluminum
3 Gear 1 stainless steel nickel plated
4 Piston 2 steel/aluminum oxidation/galvanic zinc plating
5 Plugs 8 stainless steel
6 Piston ring 2 NBR
7 Springs 0-12 spring steel epoxy coating
8 Piston bearing 2 engineering plastic
9 Piston ring 2 NBR
10 Plug 2 NBR
11 Thrust ring 2 engineering plastic
12 Ring 1 engineering plastic
13 Washer 1 stainless steel
14 Spring clamp 2 stainless steel
15 Indicator 1 plastic
16 Indicator housing 1 plastic
17 Bearing 1 engineering plastic
18 Cam 1 steel oxidation/galvanic zinc plating
19 Bearing 1 NBR
20 Bearing 1 engineering plastic
21 Bearing 1 engineering plastic
22 Sealing ring 2 NBR
23 Sealing ring 2 NBR
24 Bearing 2 stainless steel
25 Adjusting nut 2 stainless steel
26 Adjustment screw 2 stainless steel
27 Sleeve 2 aluminum

Electropneumatic rotary positioners DNOVA YT-1000RSN without feedback

Technical parameters of electropneumatic rotary positioners DNOVA YT-1000RSN without feedback

Name Meaning
Model of electropneumatic positioner YT-1000RSN without feedback
Input control signal, mA 4~20
Internal resistance, Ohm 250(±15)
Input pressure, bar 1.4~7
Lever stroke angle 0~90°
Compressed air connection thread 1/4″
Pressure gauge connection thread 1/8″
Cable entry G1/2″
Type of protection IP66
Compressed air consumption, l/min 3
Air flow at outlet, l/min 80
Body material aluminum casting

Sketch of overall dimensions and sizes of electropneumatic rotary positioners DNOVA YT-1000RSN without feedback


Dimensions and sizes of electropneumatic rotary positioners DNOVA YT-1000RSN without feedback:

Positioner model YT-1000RSI
A, mm 224.3
B, mm 166.5
C, mm 117.5
D, mm 132.3
E, mm 6
F, mm 122
G, mm 45
H, mm 45
I, mm 23
J, mm 27
K, mm 32.5
L, mm 35.5
M, mm 91.8
N, mm 37.2
O, mm 43.5
P, mm 26.5
Q, mm 33
R, mm 80.25
S, mm 62.5
T, mm 8
U1, mm 70
U2, mm 93
V1, mm 40
V2, mm 63
W, mm 26
X, mm 32
Y, mm 9
Z, mm 24
Port opening
full bore
Body material
Stainless steel AISI 316
Maximum allowable temperature
180 °C
Connection type
Flanged
Control type
Pneumatically actuated
Operating environment
Water, Steam, Petroleum Products, Neutral Media, and Gaseous Media
Type of seal
PTFE
Torque
157 Nm
Limit switches
No
Type of pneumatic actuator
spring loaded
Country of origin
China

Production. Usually 7–14 business days after you approve the quotation and pay. Made-to-specification items are confirmed in the quotation.

Freight. Not charged at checkout. A manager quotes air and sea freight to your port or airport, and nothing ships until you approve the price and the freight.

To North America. From approval and payment to the destination port or airport: air 14–24 days, sea 32–60 days. Estimates, not guarantees.

Terms. EXW Ningbo or FOB Ningbo Port; CIF on request. The agreed term is written on the Proforma Invoice.

Full shipping policy

Variant Variant total Quantity Price Variant total
DN100D160-44070
DN100D160-44070
$765.69/ea		 $0.00
Sold out
$765.69/ea $0.00
DN15D160-44071
DN15D160-44071
$152.16/ea		 $0.00
$152.16/ea $0.00
DN20D160-44072
DN20D160-44072
$178.38/ea		 $0.00
$178.38/ea $0.00
DN25D160-44073
DN25D160-44073
$195.93/ea		 $0.00
$195.93/ea $0.00
DN32D160-44074
DN32D160-44074
$244.23/ea		 $0.00
$244.23/ea $0.00
DN40D160-44075
DN40D160-44075
$293.57/ea		 $0.00
$293.57/ea $0.00
DN50D160-44076
DN50D160-44076
$306.89/ea		 $0.00
$306.89/ea $0.00
DN65D160-44077
DN65D160-44077
$433.79/ea		 $0.00
Sold out
$433.79/ea $0.00
DN80D160-44078
DN80D160-44078
$570.46/ea		 $0.00
$570.46/ea $0.00
View cart
0

Total items

$0.00

Product subtotal

Taxes included. Discounts calculated at checkout. Freight is quoted by our manager after you order.
View cart

Didn't Find What You're Looking For?

Get a Personalized Quote from Our Team
Provide us with your specific requirements, technical specifications, and parameters. Our team of experts will carefully evaluate your needs and select the most suitable equipment for you, ensuring the best possible timeframe and competitive pricing.