Description
The ball valve is used as a shut-off valve in heating, water supply, steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve. The use of ball valves as regulating valves is not allowed.
DNOVA pneumatic double-acting rotary actuators PADA are designed to automate the process of controlling industrial valves with maximum torque up to 2128 Nm.
Technical parameters of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316
| Parameter | Value |
|---|---|
| Nominal Pressure PN, bar | 16 |
| Operating Temperature, °C | -29 to 150 |
| Valve Type | Two-way |
| Application | Water supply, heating, industry |
| Working Medium | Water, air, neutral media |
| Pipeline Connection | Flanged |
| Water-drawing | No |
| Bore Type | Full bore |
| Control Type | With pneumatic actuator |
| Connection Type | Flanged |
| Operation | Double-acting pneumatic actuator |
| Limit Switches | No |
| Pneumatic Distributor | Yes |
| Electro-pneumatic Positioner | No |
| Average Service Life, years | 10 |
| Warranty, years | 1 |
| Country of Manufacture | China |
Dimensions and dimensions of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316
| DN, mm | L, mm | H, mm | ØD, mm | ØD1, mm | ØD2, mm | A, mm | E, mm | H1, mm |
| 200 | 400 | 180 | 340 | 295 | 268 | 405 | 174 | 195 |
| 250 | 450 | 296 | 405 | 355 | 320 | 465 | 199 | 195 |
Sketch dimensions and dimensions of ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316
Table of parts and materials for ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316
| № | Part Name | Material |
|---|---|---|
| 1 | Body | Stainless steel 316 |
| 2 | Gasket | Stainless steel 316 + Graphite |
| 3 | Cover | Stainless steel 316 |
| 4 | Nut | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 5 | Bolt | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 6 | Ball Seal | PTFE |
| 7 | Ball | Stainless steel 316 |
| 8 | Stem | Stainless steel 316 |
| 9 | Support Pad | PTFE |
| 10 | Stem Seal | PTFE |
| 11 | Packing Seal | Stainless steel 316 |
| 12 | Bolt | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 13 | Support Frame | Stainless steel 304 |
| 14 | Gasket | Stainless steel 304 |
| 15 | Stud | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 16 | Nut | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 17 | Cushioning Gasket | Stainless steel |
| 18 | Stud | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 19 | Nut | Stainless steel ASTM A193 Gr.B8M Cl2 |
| 20 | Gear Transmission | Steel 45 |
| 22 | Screw | Stainless steel ASTM A193 Gr.B8M Cl2 |
Parts and materials sketch for ball valves DNOVA BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316
Technical parameters of pneumatic actuator DNOVA
| Parameter | Value |
|---|---|
| Design | Double-acting |
| Control Pressure, bar | 2 ÷ 8 |
| Manual Override | No |
Dimensions and dimensions of pneumatic actuator DNOVA
| Model | DA-140 | DA-160 | DA-210 |
| G, mm | 25 | 30 | 40 |
| M, mm | 80 | 130 | 130 |
| N, mm | 30 | 30 | 30 |
| f0, mm | 62 | 62 | 79 |
| P, mm | 30 | 30 | 30 |
| B1, mm | 308 | 465 | 542 |
| C, mm | 67.5 | 87.5 | 113 |
| E, mm | 157 | 199 | 257 |
| J | 4-M8x12 | 4-M10x16 | |
| K | 4-M10x16 | 4-M12x20 | 4-M12x20 |
| F, mm | 36 | 38 | 38 |
| A1, mm | 210 | 310 | 390 |
| D, mm | 70 | 87.5 | 113 |
| H | F10 | F10 | - |
| I | F12 | F12 | F14 |
| L | 22x22 | 27x27 | 36x36 |
Sketch of dimensions and dimensions of pneumatic actuator DNOVA
Parts and materials table for pneumatic actuator DNOVA
| № | Part Name | Qty | Material | Coating |
|---|---|---|---|---|
| 1 | Body | 1 | Extruded aluminum | Hard anodized |
| 2 | Side plugs | 2 | Cast aluminum | - |
| 3 | Gear | 1 | Stainless steel | Nickel-plated |
| 4 | Piston | 2 | Steel/Aluminum | Oxidation / Galvanized zinc |
| 5 | Plugs | 8 | Stainless steel | - |
| 6 | Piston ring | 2 | NBR | - |
| 7 | Springs | 0-12 | Spring steel | Epoxy coating |
| 8 | Piston bearing | 2 | Engineering plastic | - |
| 9 | Piston ring | 2 | NBR | - |
| 10 | Plug | 2 | NBR | - |
| 11 | Stop ring | 2 | Engineering plastic | - |
| 12 | Ring | 1 | Engineering plastic | - |
| 13 | Washer | 1 | Stainless steel | - |
| 14 | Spring clamp | 2 | Stainless steel | - |
| 15 | Indicator | 1 | Plastic | - |
| 16 | Indicator housing | 1 | Plastic | - |
| 17 | Bearing | 1 | Engineering plastic | - |
| 18 | Cam | 1 | Steel | Oxidation / Galvanized zinc |
| 19 | Bearing | 1 | NBR | - |
| 20 | Bearing | 1 | Engineering plastic | - |
| 21 | Bearing | 1 | Engineering plastic | - |
| 22 | O-ring | 2 | NBR | - |
| 23 | O-ring | 2 | NBR | - |
| 24 | Bearing | 2 | Stainless steel | - |
| 25 | Adjustment nut | 2 | Stainless steel | - |
| 26 | Adjustment screw | 2 | Stainless steel | - |
| 27 | Bushing | 2 | Aluminum | - |
Technical parameters of the handwheel DNOVA MON-ISO
| Name | Value |
|---|---|
| Manual Override Model | MON-ISO |
| Climatic Designation | U, UHL, T, OM |
| Mounting Method | Horizontal/Vertical |
| Protection Rating, IP | 67 |
| Connection Type | ISO 5211 |
Dimensions and dimensions of the handwheel DNOVA MON-ISO
| Model | MON4-1200-T54-ISO |
| b1, mm | 27 |
| N, mm | 32 |
| b2, mm | 27 |
| M, mm | 30 |
| D1, mm | Ø102 |
| 4-M1, mm | 4-M10 |
| D2, mm | Ø125 |
| 4-M2, mm | 4-M12 |
| E, mm | 129x129 |
| D3, mm | Ø125 |
| 4-Ø1, mm | 4-Ø12.5 |
| D4, mm | Ø140 |
| 4-Ø2, mm | 4-Ø16.5 |
| A, mm | 188.5 |
| B, mm | 93 |
| ØC, mm | Ø174 |
| F, mm | 202 |
| T, mm | 94 |
| Y, mm | 280 |
| H, mm | 195 |
| S, mm | 84 |
| K, mm | 15 |
| Ø hand wheel, mm | 320 |
Sketch of dimensions and dimensions of handwheel DNOVA MON-ISO
Parts and materials table for the handwheel DNOVA MON-ISO
| № | Part Name | Material |
|---|---|---|
| 1 | Shaft for pneumatic actuator mounting | Steel 45 |
| 2, 8 | O-ring | EPDM |
| 3 | Retaining spring | Spring steel |
| 4 | Upper end cover | Aluminum alloy |
| 5 | Screw | Steel 304 |
| 6 | Retaining bracket (main link) | Steel 304 |
| 7 | Housing | Aluminum alloy |
| 9 | Gearbox | Cast iron BC50 |
| 10 | Adapter coupling | Cast iron BC40 |
| 11 | Gearbox shaft | Cast iron BC40 |
Technical parameters of limit switch units DNOVA APL-210N
| Parameter | Value |
|---|---|
| Model of limit switch block | APL-210N |
| Ambient temperature, °C | from -20 to 66 |
| Service life, years | 10 |
Dimensions and dimensions of DNOVA APL-210N limit switch units
| Model | H, mm | L, mm | B, mm | D, mm | D1, mm | M |
| APL-210N | 77 | 112 | 88 | 10 | 5 | 20x1.5 |
Passports and certificates
Data sheet for DNOVA DA/SA double-acting pneumatic actuator with return springs
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.