Description
Ball valve DNOVA BV3232P-FP-Fb-ISO-H is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of BV3232P-FP-Fb-ISO-H series valves is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) that are not aggressive to valve materials.
Pneumatic actuator DNOVA PA-SA with return springs is designed for automation of control process of industrial shut-off valves - gates, ball valves. DNOVA pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
Pneumatic valve DNOVA 4V320-10 220V is used to change direction, start, stop compressed air flows in pneumatic system depending on external control action.
The DNOVA APL-210N limit switch box is an electrical device designed for opening and closing of the working circuit and for visualisation of the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalise extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-coloured visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labelled CLOSED is visible; if it is open, only the yellow part labelled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the colour difference between open and closed position reduces the probability of misinterpretation of information. Thanks to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.
The AFC2000 air treatment unit is designed to clean compressed air from moisture and solid particles, remove condensate, automatically maintain pressure at a preset level, supply lubricant from a reservoir in the compressed air stream to pneumatic system components with a large capacity range from 500 litres/minute to 10,000 litres/minute. The lubricator (oil atomiser) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components - pneumatic cylinders and pneumatic valves.
Technical parameters of ball valves DNOVA BV3232P-FP-Fb-ISO-H with pneumatic actuator PA-SA with return springs, pneumatic valve 4V320-10 220V, BCV APL-210N, BCV AFC2000:
| Name | Meaning |
| Nominal pressure PN, bar | 16 |
| Type of crane device | two-way |
| Application | heat supply |
| Working environment | water, air, steam, oils, industrial water, petroleum |
| Connection to the pipeline | interflange |
| Water intake | No |
| Type of flow section | full bore |
| Control type | With pneumatic drive |
| Joining | interflange |
| Control | double acting pneumatic actuator |
| Availability of limit switches | There is |
| Availability of pneumatic distributor | There is |
Sketch of ball valves DNOVA BV3232P-FP-Fb-ISO-H with pneumatic actuator PA-SA with return springs, pneumatic valve 4V320-10 220V, BCV APL-210N, BCV AFC2000
Dimensions and dimensions of ball valves DNOVA BV3232P-FP-Fb-ISO-H with pneumatic actuator PA-SA with return springs, pneumatic valve 4V320-10 220V, BCV APL-210N, BCV AFC2000:
| DN, mm | L, mm | D, mm | F, mm | L1, mm | G, mm | X, mm | Y, mm |
| 15 | 42 | 95 | 98 | 153 | 77 | 88 | 162 |
| 20 | 48 | 105 | 98 | 153 | 77 | 88 | 162 |
| 25 | 50 | 115 | 98 | 153 | 77 | 88 | 162 |
| 32 | 60 | 140 | 98 | 153 | 77 | 88 | 162 |
| 40 | 65 | 150 | 115 | 174 | 77 | 88 | 162 |
| 50 | 80 | 165 | 135 | 216 | 77 | 88 | 162 |
| 65 | 110 | 185 | 135 | 216 | 77 | 88 | 162 |
| 80 | 120 | 200 | 160 | 279 | 77 | 88 | 162 |
| 100 | 150 | 220 | 160 | 279 | 77 | 88 | 162 |
Detail and material sketch of ball valves DNOVA BV3232P-FP-Fb-ISO-H
Table of parts and materials for ball valves DNOVA BV3232P-FP-Fb-ISO-H:
| No. | Name | Material |
| 1 | screw | Steel 304 |
| 2 | Pad | PTFE |
| 3 | Thrust gasket | PTFE |
| 4 | Stock | Steel 316 |
| 5 | Ball cap | Steel 316 |
| 6 | Frame | Steel 316 |
| 7 | Ball seal | PTFE |
| 8 | Ball | Steel 316 |
Technical parameters of PA-SA pneumatic actuator with return springs:
| Name | Meaning |
| Model | PA-SA |
| Design | with return springs |
| Control pressure, bar | 2 ÷ 8 |
Sketch of parts and materials of DNOVA PA-DA double-acting pneumatic actuator
Parts and materials table for double-acting pneumatic actuator DNOVA PA-DA:
| No. | Name | Material |
| 1 | Frame | extruded aluminum |
| 2 | Side plugs | cast aluminum |
| 3 | Gear | stainless steel |
| 4 | Piston | steel/aluminum |
| 5 | Plugs | stainless steel |
| 6 | Piston ring | NBR |
| 7 | Springs | spring steel |
| 8 | Piston bearing | engineering plastic |
| 9 | Piston ring | NBR |
| 10 | Plug | NBR |
| 11 | Thrust ring | engineering plastic |
| 12 | Ring | engineering plastic |
| 13 | Washer | stainless steel |
| 14 | Spring clamp | stainless steel |
| 15 | Indicator | plastic |
| 16 | Indicator housing | plastic |
| 17 | Bearing | engineering plastic |
| 18 | Cam | steel |
| 19 | Bearing | NBR |
| 20 | Bearing | engineering plastic |
| 21 | Bearing | engineering plastic |
| 22 | Sealing ring | NBR |
| 23 | Sealing ring | NBR |
| 24 | Bearing | stainless steel |
| 25 | Adjusting nut | stainless steel |
| 26 | Adjustment screw | stainless steel |
| 27 | Sleeve | aluminum |
Technical parameters of the DNOVA 4V320-10 220V pneumatic valve
| Name | Meaning |
| Type of pneumatic distributor | spool valve |
| Model of pneumatic distributor | 4V320-10 220V |
| Working pressure, bar | 1.5 ÷ 8 |
| Supply voltage, V | 220 V |
| Response frequency, cycles/sec | 5 |
Limit switch unit DNOVA APL-210N
Technical parameters of limit switch unit DNOVA APL-210N
| Name | Meaning |
| Limit switch block model | APL-210N |
| Ambient temperature, °C | from -50 to 200 |
| Service life, years | 10 |
Table of parts and materials of the limit switch unit DNOVA APL-210N:
| No. | Name | Material |
| 1 | Frame | cast aluminum |
| 2 | Indicator cap | polyester plastic |
| 3 | 3D indicator | ABC plastic |
| 4 | Cam | polyester plastic |
| 5 | Spring | stainless steel |
| 6 | Screws | stainless steel |
| 7 | Sealing rings | NBR |
| 8 | Sleeve | bronze |
| 9 | Ground terminal | stainless steel |
| 10 | Shaft | stainless steel |
Main parameters of the DNOVA AFC2000 air treatment unit
| Working pressure, bar | 8 |
| Maximum pressure, bar | 10 |
| Adjustable pressure range, bar | 0.5 ÷ 9 |
| Destruction pressure, bar | 15 |
| Air connection | 1/4" |
| Operating temperature, C | from -5 to +60 |
| Size of filtered particles, µm | 40 |
| Oil viscosity | ISO VG 32 |
| Weight, kg | 0.395 |
| Kit composition | filter-moisture separator, pressure regulator, lubricator, bracket |
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.