Parts

Ball valve BV3131P(3pc)-FP-W-ISO-H LONG with pneumatic double-acting actuator

PA-DA · YT-1000RSN positioner · weld-end, AISI 304 body, PTFE seal

Model BV3131P(3pc)-FP-W-ISO-H SKU D160-51161

$453.93 USD

Sale Sold out

Taxes included. Freight is quoted by our manager after you order; nothing ships until you approve it.

View full details

How it works

Double-acting rotary actuator

Two-way ball valve

Rotary positioner

Rotary positioner: Signal high — **Signal high**The drive holds the other end position.

The number that matters

Max. medium temperature

180°C

The highest medium temperature this valve is rated for.

Applications

Media and industries

Water
Steam
Petroleum Products
Neutral Media
Gaseous Media

The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.

Pneumatic actuators DNOVA double-acting rotary PA-DA are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.

Electro-pneumatic rotary positioner is used to control rotary type pneumatic actuators by means of electric controller or control system with analog DC output signal in the range of 4 to 20 mA.

Technical parameters of DNOVA BV3131P(3pc)-FP-W-ISO-H LONG DN10-150 full bore, body - stainless steel 304, welded, with pneumatic actuator DNOVA PA-DA and pneumatic positioner YT-1000RSN

Name	Meaning
Working environment temperature, °C	from -20 to 180
Type of crane device	two-way
Application	water supply, heat supply, industry
Working environment	water, steam, petroleum products, neutral media, gaseous media
Connection to the pipeline	for welding
Water intake	No
Type of flow section	full bore
Control type	With pneumatic drive
Joining	for welding
Control	double acting pneumatic actuator
Availability of limit switches	No
Availability of pneumatic distributor	No
Availability of electropneumatic positioner	There is
Average service life, years	5
Warranty, g.	1

Sketch of overall dimensions and sizes of ball valves DNOVA BV3131P(3pc)-FP-W-ISO-H LONG DN10-150 full bore, body - stainless steel 304, welded, with pneumatic actuator DNOVA PA-DA and pneumatic positioner YT-1000RSN

Dimensions and sizes of ball valves DNOVA BV3131P(3pc)-FP-W-ISO-H LONG DN10-150 full bore, body - stainless steel 304, welded, with pneumatic actuator DNOVA PA-DA and pneumatic positioner YT-1000RSN

DN	d, mm	D, mm	B, mm	H, mm	L, mm	E, mm
10	12	17,2	2,1	50	130	120
15	15	21,3	2,1	55	150	120
20	20	26,9	2,1	66	155	135
25	25	33,7	2,8	71	186	160
32	32	42,4	2,8	81	195	170
40	38	48,3	2,8	87	231	190
50	50	60,3	2,8	91	243	220
65	64	76,1	3,0	119	290	280
80	76	88,9	3,0	125	302	280
100	100	114,3	3,0	159	326	330
100	100	114,3	3,0	159	326	330
125	125	141,3	3,4	186	360	330
150	150	168,3	3,4	207	390	330

Sketch of parts and materials of ball valves DNOVA BV3232P(3pc)-FP-W-ISO-H LONG DN50-150 PN16-40 full bore, body - stainless steel 316, for welding, with pneumatic actuator PA-DA, pneumatic distributor 4M310-08 24V, reducer MON, BKV APL-510N EX and BPV AFC2000

Table of parts and materials of ball valves DNOVA BV3131P(3pc)-FP-W-ISO-H LONG DN10-150 full bore, body - stainless steel 304, welded, with pneumatic actuator DNOVA PA-DA and pneumatic positioner YT-1000RSN

Item No.	Part name	Material
1	Frame	stainless steel 304
2	Side element (2 pcs)	stainless steel 304
3	Ball	stainless steel 304
4	Ball seal	PTFE
5	Rod seal	PTFE
6	Sleeve	stainless steel 304
7	Stock	stainless steel 304
8	Washer	stainless steel
9	screw	steel A2-70
10	Bolt	steel A2-70

Technical data of DA double-acting pneumatic actuators:

Type of pneumatic actuator	DA - double-acting
Nominal pressure PN, bar	12
Working pressure, bar	2...8
Working medium	filtered compressed air
Maximum particle diameter of the working medium, µm2	≤30
Ambient temperature, °C	-20 to +80
Swivel angle, °	0 - 90
Swivel angle adjustment, %	±5
Position indicator	open/closed
Top connection standard	NAMUR
Air connection standard	NAMUR
Average life, cycles closed/open	70 000 (for non-aggressive media and medium pressure and temperature values)

DA pneumatic actuators double-acting rotary actuators

Dimensions and mounting dimensions of DA double-acting pneumatic actuators:

Model	A, mm	B, mm	C, mm	D, mm	E, mm	F, mm	G, mm	H, mm
DA-052	30	41,5	65,5	72	92	65	30	80
DA-065	36	47	81	88	108	72	30	80
DA-083	46	57	98,5	108,7	128,7	92	30	80
DA-105	57,5	64	122,5	133	153	109,5	30	80
DA-130	67,5	74,5	145,5	155	185	127,5	30	130
DA-140	75	77	161	172	202	137,5	30	130
DA-160	87	87	184	197	227	159	30	130
DA-210	113	113	235,5	255	285	210	30	130
DA-270	147	147	299	326	356	273	30	130
DA-300	162	174	330	350	380	312	30	130
DA-350	190	195	483	410	440	365	30	130

Model	I, mm	J, mm	M, mm	N, mm	Z, mm	d, mm	K	L
DA-052	36	50	11x11	14	147	40	M5x8	M6x10
DA-065	50	70	14x14	18	168	40	M6x10	M8x13
DA-083	50	70	17x17	21	204	40	M6x10	M8x13
DA-105	70	102	22x22	26	268	40	M8x13	M10x16
DA-130	70	102	22x22	26	301	55	M8x13	M10x16
DA-140	102	125	27x27	31	390	55	M10x16	M12x20
DA-160	102	125	27x27	31	458	55	M10x16	M12x20
DA-210	-	140	36x36	40	532	80	-	M16x25
DA-270	-	165	46x46	50	718	80	-	M20x25
DA-300	-	165	46x46	50	760	80	-	M20x25
DA-350	165	254	46x46	50	920	80	M20x25	8xM16x25

Sketch of dimensions of DA double-acting pneumatic actuators

Materials of parts for DA double-acting pneumatic actuators:

№	Part name	Material
1	Indicator screw	ABS plastic
2	Position indicator	ABS plastic
3	Spring clip	stainless steel 304
4	Metal washer	stainless steel 304
5	Pressure washer	engineering plastic
6	Housing	hard anodized extruded aluminum alloy
7	Pressure washer	engineering plastic
8	Limiter	alloy steel
9	Shaft sealing ring upper	NBR
10	Upper shaft sliding ring	engineering plastic
11	Shaft	nickel plated alloy steel
12	Shaft sliding ring lower	engineering plastic
13	Shaft O-ring lower	NBR
14	Plug	NBR
15	Seal ring of adjusting screws	NBR
16	Washer of adjusting screw	stainless steel 304
17	Lock nut of adjusting screw	stainless steel 304
18	Adjusting screw	stainless steel 304
19	Piston	die-cast aluminum alloy
20	Piston guide plate	engineering plastic
21	Piston sliding ring	engineering plastic
22	Piston O-ring	NBR
23	Spring set	spring steel
24	Cover O-ring	NBR
25	End cap	cast aluminum with polyester coating
26	Cover screw	stainless steel 304
27	Stop screw	stainless steel 304
28	Adapter	carbon steel

Material sketch of DA double-acting pneumatic actuators

Electropneumatic rotary positioners DNOVA YT-1000RSN

Technical parameters of electropneumatic rotary positioners DNOVA YT-1000RSN

Name	Meaning
Model of electropneumatic positioner	YT-1000RSN
Input control signal, mA	4~20
Internal resistance, Ohm	250(±15)
Input pressure, bar	1.4~7
Lever stroke angle	0~90°
Compressed air connection thread	1/4″
Pressure gauge connection thread	1/8″
Cable entry	G1/2″
Type of protection	IP66
Compressed air consumption, l/min	3
Air flow at outlet, l/min	80
Body material	aluminum casting

Sketch of dimensions and sizes of electropneumatic rotary positioners DNOVA YT-1000RSN

Dimensions and sizes of electropneumatic rotary positioners DNOVA YT-1000RSN:

Positioner model	YT-1000RSI
A, mm	224.3
B, mm	166.5
C, mm	117.5
D, mm	132.3
E, mm	6
F, mm	122
G, mm	45
H, mm	45
I, mm	23
J, mm	27
K, mm	32.5
L, mm	35.5
M, mm	91.8
N, mm	37.2
O, mm	43.5
P, mm	26.5
Q, mm	33
R, mm	80.25
S, mm	62.5
T, mm	8
U1, mm	70
U2, mm	93
V1, mm	40
V2, mm	63
W, mm	26
X, mm	32
Y, mm	9
Z, mm	24

Port opening: full bore
Body material: Stainless steel AISI 304
Maximum allowable temperature: 180 °C
Connection type: For welding
Control type: Pneumatically actuated
Operating environment: Water, Steam, Petroleum Products, Neutral Media, and Gaseous Media
Type of seal: PTFE
Torque: 3 Nm
Limit switches: No
Type of pneumatic actuator: double action
Country of origin: China

Production. Usually 7–14 business days after you approve the quotation and pay. Made-to-specification items are confirmed in the quotation.

Freight. Not charged at checkout. A manager quotes air and sea freight to your port or airport, and nothing ships until you approve the price and the freight.

To North America. From approval and payment to the destination port or airport: air 14–24 days, sea 32–60 days. Estimates, not guarantees.

Terms. EXW Ningbo or FOB Ningbo Port; CIF on request. The agreed term is written on the Proforma Invoice.

Full shipping policy

Your cart
Variant	Variant total	Quantity	Price	Variant total
DN10 / 63 bar / Without feedbackD160-51161	DN10 / 63 bar / Without feedbackD160-51161 $453.93/ea	$0.00	Quantity	$453.93/ea	$0.00

DN100 / 16 bar / Without feedbackD160-51162	DN100 / 16 bar / Without feedbackD160-51162 $1,194.55/ea	$0.00	Quantity	$1,194.55/ea	$0.00

DN100 / 16 bar / With feedbackD160-51163	DN100 / 16 bar / With feedbackD160-51163 $1,315.80/ea	$0.00	Quantity	$1,315.80/ea	$0.00

DN10 / 63 bar / With feedbackD160-51164	DN10 / 63 bar / With feedbackD160-51164 $575.19/ea	$0.00	Quantity	$575.19/ea	$0.00

DN125 / 16 bar / Without feedbackD160-51165	DN125 / 16 bar / Without feedbackD160-51165 $1,983.24/ea	$0.00	Quantity	$1,983.24/ea	$0.00

DN125 / 16 bar / With feedbackD160-51166	DN125 / 16 bar / With feedbackD160-51166 $2,104.50/ea	$0.00	Quantity	$2,104.50/ea	$0.00

DN15 / 63 bar / Without feedbackD160-51167	DN15 / 63 bar / Without feedbackD160-51167 $453.93/ea	$0.00	Quantity	$453.93/ea	$0.00

DN150 / 16 bar / Without feedbackD160-51168	DN150 / 16 bar / Without feedbackD160-51168 $2,710.15/ea	$0.00	Quantity	$2,710.15/ea	$0.00

DN150 / 16 bar / With feedbackD160-51169	DN150 / 16 bar / With feedbackD160-51169 $2,831.40/ea	$0.00	Quantity	$2,831.40/ea	$0.00

DN15 / 63 bar / With feedbackD160-51170	DN15 / 63 bar / With feedbackD160-51170 $575.19/ea	$0.00	Quantity	$575.19/ea	$0.00

DN20 / 63 bar / Without feedbackD160-51171	DN20 / 63 bar / Without feedbackD160-51171 $512.17/ea	$0.00	Quantity	$512.17/ea	$0.00

DN20 / 63 bar / With feedbackD160-51172	DN20 / 63 bar / With feedbackD160-51172 $633.42/ea	$0.00	Quantity	$633.42/ea	$0.00

DN25 / 63 bar / Without feedbackD160-51173	DN25 / 63 bar / Without feedbackD160-51173 $517.00/ea	$0.00	Quantity	$517.00/ea	$0.00

DN25 / 63 bar / With feedbackD160-51174	DN25 / 63 bar / With feedbackD160-51174 $638.25/ea	$0.00	Quantity	$638.25/ea	$0.00

DN32 / 40 bar / Without feedbackD160-51175	DN32 / 40 bar / Without feedbackD160-51175 $510.48/ea	$0.00	Quantity	$510.48/ea	$0.00

DN32 / 40 bar / With feedbackD160-51176	DN32 / 40 bar / With feedbackD160-51176 $631.73/ea	$0.00	Quantity	$631.73/ea	$0.00

DN40 / 40 bar / Without feedbackD160-51177	DN40 / 40 bar / Without feedbackD160-51177 $561.91/ea	$0.00	Quantity	$561.91/ea	$0.00

DN40 / 40 bar / With feedbackD160-51178	DN40 / 40 bar / With feedbackD160-51178 $683.17/ea	$0.00	Quantity	$683.17/ea	$0.00

DN50 / 40 bar / Without feedbackD160-51179	DN50 / 40 bar / Without feedbackD160-51179 $621.23/ea	$0.00	Quantity	$621.23/ea	$0.00

DN50 / 40 bar / With feedbackD160-51180	DN50 / 40 bar / With feedbackD160-51180 $742.48/ea	$0.00	Quantity	$742.48/ea	$0.00

DN65 / 25 bar / Without feedbackD160-51181	DN65 / 25 bar / Without feedbackD160-51181 $767.44/ea	$0.00	Quantity	$767.44/ea	$0.00

DN65 / 25 bar / With feedbackD160-51182	DN65 / 25 bar / With feedbackD160-51182 $888.70/ea	$0.00	Quantity	$888.70/ea	$0.00

DN80 / 25 bar / Without feedbackD160-51183	DN80 / 25 bar / Without feedbackD160-51183 $893.69/ea	$0.00	Quantity	$893.69/ea	$0.00

DN80 / 25 bar / With feedbackD160-51184	DN80 / 25 bar / With feedbackD160-51184 $1,014.94/ea	$0.00	Quantity	$1,014.94/ea	$0.00

View cart

Total items

$0.00

Product subtotal

Taxes included. Discounts calculated at checkout. Freight is quoted by our manager after you order.