Description
Butterfly valve model WBV1132N-2W-Fb PA-DA 4V320-10 APL-510N-EX 4V320-10 220V AFC2000 is designed for use as shut-off or regulating valves to control flows in heating, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
PA-DA pneumatic actuators are designed for automation of control process of industrial shut-off valves - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
Pneumatic actuators 4V320-10 220 V are used for control in pneumatic systems having NAMUR docking surface for installation of actuators through through holes in the housing.
Air treatment unit AFC2000 is designed for compressed air purification from dripping moisture and solid particles, condensate removal, automatic maintece of pressure value at the set level, lubricant supply from the tank to the compressed air flow to the pneumatic system elements with a wide range of throughput from 500 liters/minute to 10 000 liters/minute. The lubricator (oil atomizer) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components such as pneumatic cylinders and pneumatic valves.
The APL-510N-EX limit switch unit is an electrotechnical device designed to open and close the working circuit and to visualize the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.
Technical parameters of DNOVA WBV1132N-2W-Fb-H butterfly valves, body material - gray cast iron GG25, disc material - stainless steel AISI 316L, sealing - NBR, with double-acting pneumatic actuator PA-DA, 4V320-10 220V, LSU APL-510N-EX, ATU AFC2000:
| Nominal diameter DN, mm | 40-200 |
| Working pressure PN, bar | 16 |
| Working medium temperature t, ⁰C | -20 to +120 |
| Working medium | cold and hot water, air without oil and grease impurities, other media neutral to the material |
| Flow direction | double-sided |
| Body material | cast iron GG25 |
| Control type | manual (handle) |
| Supplement | electric or pneumatic actuator possible (ISO 5211-2001) |
Butterfly valves WBV1132N-2W-Fb-H, body material - grey cast iron GG25, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA, 4V320-10 220V, LSU APL-510N-EX, ATU AFC2000
Dimensions and dimensions of butterfly valves DNOVA WBV1132N-2W-Fb-H, body material - gray cast iron GG25, disc material - stainless steel AISI 316L, sealing - NBR, with double-acting pneumatic actuator PA-DA, 4V320-10 220V, LSU APL-510N-EX, ATU AFC2000:
| DN | A, mm | C, mm | K, mm | L1, mm | E, mm | X, mm | Y, mm |
| 40 | 114 | 153 | 121.4 | 153 | 34 | 88 | 162 |
| 50 | 131 | 174 | 121.4 | 174 | 43 | 88 | 162 |
| 65 | 140 | 174 | 121.4 | 174 | 46 | 88 | 162 |
| 80 | 150 | 216 | 121.4 | 216 | 46 | 88 | 162 |
| 100 | 163 | 216 | 121.4 | 216 | 52 | 88 | 162 |
| 125 | 178 | 279 | 121.4 | 279 | 56 | 88 | 162 |
| 150 | 191 | 279 | 121.4 | 279 | 56 | 88 | 162 |
| 200 | 238 | 308 | 121.4 | 308 | 60 | 88 | 162 |
| 250 | 285 | 405 | 121.4 | 405 | 68 | 88 | 162 |
| 300 | 315 | 465 | 121.4 | 465 | 78 | 88 | 162 |
Sketch Butterfly valves WBV1132N-2W-Fb-H, body material - grey cast iron GG25, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA, 4V320-10 220V, LSU APL-510N-EX, ATU AFC2000
Materials of butterfly valves DNOVA WBV1132N-2W-Fb-H, body material - gray cast iron GG25, disc material - stainless steel AISI 316L, sealing - NBR, with double-acting pneumatic actuator PA-DA, 4V320-10 220V, LSU APL-510N-EX, ATU AFC2000:
| № | Part name | Material |
| 1 | Body | cast iron GG25 |
| 2 | Seat seal | NBR |
| 3 | Disk | stainless steel 316L |
| 4 | Rod | SS AISI 416 |
| 5 | Pin | SS AISI 420 |
| 6 | Sleeve | PTFE |
| 7 | O-ring | NBR |
| 8 | Plate | carbon steel |
Sketch of parts and materials Butterfly valves WBV1132N-2W-Fb-H, body material - grey cast iron GG25, disk material - stainless steel AISI 316L, seal - NBR, with pneumatic actuator double action PA-DA, 4V320-10 220V, LSU APL-510N-EX, ATU AFC2000
Technical data of PA-DA pneumatic actuators:
| Design | Double action |
| Nominal pressure PN, bar | 12 |
| Working pressure, bar | 2...8 |
| Working medium | Filtered compressed air or non-aggressive gases, oils |
| Maximum particle diameter | less than 30 µm2 |
| Operating temperature t, ⁰C | - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air) |
| Adjustment range | ± 5 ° for rotation at 0 ° and 90 ° |
| Manual override | is |
| Position indicator | open/closed |
| Operating environment | indoors and outdoors. (All internal and external parts are anti-corrosion coated) |
PA-DA pneumatic actuator
PA-DA pneumatic actuator component materials:
| № | Name | Material |
| 1 | Enclosure | extruded aluminum |
| 2 | Side plugs | cast aluminum |
| 3 | Gear | stainless steel |
| 4 | Piston | steel/aluminum |
| 5 | Plugs | stainless steel |
| 6 | Piston ring | NBR |
| 7 | Springs | spring steel |
| 8 | Piston bearing | engineering plastic |
| 9 | Piston ring | NBR |
| 10 | Plug | NBR |
| 11 | Thrust ring | engineering plastic |
| 12 | Ring | engineering plastic |
| 13 | Washer | stainless steel |
| 14 | Spring clip | stainless steel |
| 15 | Indicator | plastic |
| 16 | Indicator housing | plastic |
| 17 | Bearing | engineering plastic |
| 18 | Cam | steel |
| 19 | Bearing | NBR |
| 20 | Bearing | engineering plastic |
| 21 | Bearing | engineering plastic |
| 22 | Sealing ring | NBR |
| 23 | Sealing ring | NBR |
| 24 | Bearing | stainless steel |
| 25 | Adjustment nut | stainless steel |
| 26 | Adjustment screw | stainless steel |
| 27 | Sleeve | aluminum |
Parts and material sketch of the PA-DA pneumatic actuator
Technical parameters of pneumatic valve 4V320-10 220V:
| Name | meaning |
| Type of pneumatic valve | slide valve |
| Working pressure, bar | 1.5 ÷ 8 |
| Supply voltage, V | 220 V |
| Total power, Va | 4.5 |
| Control | double-sided electromagnetic |
| Frequency of operation, cycle/sec | 5 |
Pneumatic valve 4V320-10 220V
Dimensions and dimensions of pneumatic valve 4V320-10 220V:
| Pneumatic valve model | 4V320-10 |
| A, mm | 71.9 |
| B, mm | 45 |
| C, mm | 94.4 |
| D, mm | 27 |
| E, mm | 69 |
| F, mm | 40 |
| I, mm | 24 |
| K, mm | 40 |
| L, mm | 188.8 |
| M, mm | 69.4 |
| N, mm | 50 |
| O, mm | 82.4 |
| P, mm | 24 |
| S, mm | 20 |
| T, mm | 6.5 |
| U, mm | 2.4 |
| V, mm | 4 |
| H, mm | 82.4 |
Sketch of dimensions and dimensions of pneumatic valve 4V320-10 220V
Characteristics of limit switch unit APL-510N-EX:
| Parameter | Significance |
| Enclosure | all-weather IP67/ NEMA4 4X,7,9 explosion-proof E EX d IIC T6 |
| Compatible devices | quarter-turn pneumatic actuators; - any actuators with shaft rotation by 90 |
| Full rotation angle | 90° |
| Cable glands | 2 x NPT 3/4” |
| Electrical connection | screw terminals 8 points (0.08 - 2.5) mm2 |
| Cable gland thread | 2 x NPT 3/4” |
| Type of visual indicator | two-color hemisphere: OPEN (Open) - yellow CLOSED (Closed) - red |
| Switches/sensors | two mechanical switches two proximity sensors |
| Rated voltage, V | 250 |
| Rated current, A | 16 |
| Permissible ambient temperature, °C | -20 to +66 |
| Average life, cycles | 10 000 000 |
| Weight, kg | 1.8 |
Main parameters of the AFC2000 air treatment unit:
| Operating pressure, bar | 8 |
| Maximum pressure, bar | 10 |
| Adjustable pressure range, bar | 0,5 ÷ 9 |
| Breaking pressure, bar | 15 |
| Air connection | 1/4” |
| Operating temperature, C | -5 to +60 |
| Filter particle size, µm | 40 |
| Oil viscosity | ISO VG 32 |
| Weight, kg | 0,395 |
| Set composition | filter-moisture separator, pressure regulator, lubricator, bracket |
Air treatment unit AFC2000
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.