Description
The ball valve is used as a shut-off valve in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.
Pneumatic actuators DNOVA double-acting rotary PA-DA are designed to automate the process of controlling industrial valves with a maximum torque of up to 2128 Nm.
The limit switch unit is designed for visual and electrical signaling of the end positions of the shut-off element of the valve: valve, tap or butterfly valve. It is installed on top of the surface of the pneumatic drive and connected to the DIN standard drive shaft. In a sealed box, as a rule, there are two sensors that monitor the position of the drive shaft and signal in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. Visual indication of the position can be seen on the body of the unit there is a 3D visual indicator RED - CLOSED and GREEN - OPEN.
Technical parameters of DNOVA BV3131P(3pc)-FP-W-ISO-H LONG ball valves DN10-150 PN16-63 full bore, body - stainless steel 304, for welding, with DNOVA PA-SA pneumatic actuator and APL-210N limit switch unit:
| Name | Meaning |
| Working environment temperature, °C | from -20 to 180 |
| Type of crane device | two-way |
| Application | water supply, heat supply, industry |
| Working environment | water, steam, petroleum products, neutral media, gaseous media |
| Connection to the pipeline | for welding |
| Water intake | No |
| Type of flow section | full bore |
| Control type | With pneumatic drive |
| Joining | for welding |
| Control | pneumatic actuator with return springs |
| Availability of limit switches | There is |
| Availability of pneumatic distributor | No |
| Availability of electropneumatic positioner | No |
| Average service life, years | 5 |
| Warranty, g. | 1 |
Sketch of the dimensions and sizes of ball valves DNOVA BV3131P(3pc)-FP-W-ISO-H LONG DN10-150 PN16-63 full bore, body - stainless steel 304, for welding, with pneumatic actuator DNOVA PA-SA and limit switch block APL-210N
Dimensions and sizes of ball valves DNOVA BV3131P(3pc)-FP-W-ISO-H LONG DN10-150 PN16-63 full bore, body - stainless steel 304, for welding, with pneumatic actuator DNOVA PA-SA and limit switch block APL-210N:
| Model | L, mm | A, mm | E, mm |
| DN10 | 130 | 153 | 72 |
| DN15 | 150 | 216 | 109 |
| DN20 | 155 | 279 | 134 |
| DN25 | 186 | 279 | 134 |
| DN32 | 195 | 216 | 109 |
| DN40 | 231 | 279 | 134 |
| DN50 | 243 | 279 | 134 |
| DN65 | 290 | 279 | 134 |
| DN80 | 302 | 308 | 157 |
| DN100 | 326 | 405 | 174 |
| DN125 | 360 | 542 | 257 |
| DN150 | 390 | 542 | 257 |
Sketch of parts and materials of ball valves DNOVA BV3131P(3pc)-FP-W-ISO-H LONG DN10-150 PN16-63 full bore, body - stainless steel 304, for welding, with pneumatic actuator DNOVA PA-SA and limit switch block APL-210N
Table of parts and materials of ball valves DNOVA BV3131P(3pc)-FP-W-ISO-H LONG DN10-150 PN16-63 full bore, body - stainless steel 304, for welding, with pneumatic actuator DNOVA PA-SA and limit switch block APL-210N:
| Item No. | Part name | Material |
| 1 | Frame | stainless steel 304 |
| 2 | Side element (2 pcs) | stainless steel 304 |
| 3 | Ball | stainless steel 304 |
| 4 | Ball seal | PTFE |
| 5 | Rod seal | PTFE |
| 6 | Sleeve | stainless steel 304 |
| 7 | Stock | stainless steel 304 |
| 8 | Washer | stainless steel |
| 9 | screw | steel A2-70 |
| 10 | Bolt | steel A2-70 |
Pneumatic drive DNOVA
Technical parameters of the pneumatic drive DNOVA
| Name | Meaning |
| Design | double acting |
| Control pressure, bar | 2 ÷ 8 |
Sketch of the dimensions and sizes of the pneumatic drive DNOVA
Dimensions and sizes of the pneumatic drive DNOVA:
| Model | PA-SA-52 | PA-SA-83 | PA-SA-105 | PA-SA-130 | PA-SA-140 | PA-SA-210 |
| A1, mm | 108 | 152 | 189 | 210 | 268 | 390 |
| B1, mm | 153 | 216 | 279 | 308 | 405 | 542 |
| C, mm | 30 | 46 | 55 | 67.5 | 76 | 113 |
| D, mm | 41 | 55 | 64 | 70 | 77 | 113 |
| E, mm | 72 | 109 | 134 | 157 | 174 | 257 |
| F, mm | 26 | 26 | 26 | 36 | 36 | 38 |
| G, mm | 15 | 15 | 25 | 25 | 30 | 40 |
| H, mm | F03 | F05 | F07 | F07 | F10 | / |
| I, mm | F05 | F07 | F10 | F10 | F12 | F14 |
| J, mm | 4-M5x8 | 4-M6x10 | 4-M8x12 | 4-M8x12 | 4-M10x16 | / |
| K, mm | 4-M6x10 | 4-M8x12 | 4-M10x16 | 4-M10x16 | 4-M12x20 | 4-M12x20 |
| L, mm | 11x11 | 17x17 | 22x22 | 22x22 | 27x27 | 36x36 |
| Mmm | 80 | 80 | 80 | 80 | 130 | 130 |
| N, mm | 30 | 30 | 30 | 30 | 30 | 30 |
| F0, mm | 34 | 34 | 41 | 62 | 62 | 79 |
| R, mm | 20 | 20 | 20 | 30 | 30 | 30 |
Table of parts and materials of pneumatic drive DNOVA:
| No. | Name | Quantity | Material | Coating |
| 1 | Frame | 1 | extruded aluminum | hard anodized |
| 2 | Side plugs | 2 | cast aluminum | |
| 3 | Gear | 1 | stainless steel | nickel plated |
| 4 | Piston | 2 | steel/aluminum | oxidation/galvanic zinc plating |
| 5 | Plugs | 8 | stainless steel | |
| 6 | Piston ring | 2 | NBR | |
| 7 | Springs | 0-12 | spring steel | epoxy coating |
| 8 | Piston bearing | 2 | engineering plastic | |
| 9 | Piston ring | 2 | NBR | |
| 10 | Plug | 2 | NBR | |
| 11 | Thrust ring | 2 | engineering plastic | |
| 12 | Ring | 1 | engineering plastic | |
| 13 | Washer | 1 | stainless steel | |
| 14 | Spring clamp | 2 | stainless steel | |
| 15 | Indicator | 1 | plastic | |
| 16 | Indicator housing | 1 | plastic | |
| 17 | Bearing | 1 | engineering plastic | |
| 18 | Cam | 1 | steel | oxidation/galvanic zinc plating |
| 19 | Bearing | 1 | NBR | |
| 20 | Bearing | 1 | engineering plastic | |
| 21 | Bearing | 1 | engineering plastic | |
| 22 | Sealing ring | 2 | NBR | |
| 23 | Sealing ring | 2 | NBR | |
| 24 | Bearing | 2 | stainless steel | |
| 25 | Adjusting nut | 2 | stainless steel | |
| 26 | Adjustment screw | 2 | stainless steel | |
| 27 | Sleeve | 2 | aluminum |
Limit Switch Block DNOVA APL-210N 
Technical parameters of the limit switch unit DNOVA APL-210N
| Name | Meaning |
| Limit switch block model | APL-210N |
| Ambient temperature, °C | from -40 to 80 |
| Service life, years | 10 |
Sketch of the dimensions and sizes of the limit switch block DNOVA APL-210N
Dimensions and sizes of the limit switch unit DNOVA APL-210N:
| Model | APL-210N |
| H, mm | 77 |
| L, mm | 112 |
| B, mm | 88 |
| D, mm | 10 |
| D1, mm | 5 |
| M, mm | 20x1.5 |
Table of parts and materials of the limit switch block DNOVA APL-210N:
| Detail | Material |
| Frame | cast aluminum |
| Indicator cap | polyester plastic |
| 3D indicator | ABC plastic |
| Cam | polyester plastic |
| Spring | stainless steel |
| Screws | stainless steel |
| Sealing rings | NBR |
| Sleeve | bronze |
| Ground terminal | stainless steel |
| Shaft | stainless steel |
Specifications
Delivery
The cost and delivery time for your order depend on several factors, including the specific product you are ordering, the quantity, and the country of destination. Each product may have different manufacturing lead times and shipping requirements, which can affect the overall delivery schedule.
To get the most accurate and up-to-date information on delivery costs and timelines, we recommend contacting our sales managers. They will be happy to provide you with a detailed quote and estimated delivery time based on your specific requirements.
Please feel free to reach out to us for any questions or further assistance regarding your order.